Retraction: Photo-responsive hole formation in the monolayer membrane wall of a supramolecular nanotube for quick recovery of encapsulated protein.

[This retracts the article DOI: 10.1039/D2NA00035K.].

Photo-controllable microcleaner: photo-induced crawling motion and particle transport of azobenzene crystals on a liquid-like surface.

Organic crystals of 3,3'-dimethylazobenzene (DMAB) exhibit photo-induced crawling motion on solid surfaces when they are simultaneously irradiated with ultraviolet and visible light from opposite directions. DMAB crystals are candidates for light-driven cargo transporters, having simple chemical compositions and material structures. However, fast crawling motion without significant shape deformation has not yet been achieved.

Releasing a bound molecular spring with light: a visible light-triggered photosalient effect tied to polymorphism.

Here we present a study on the solid state properties of tetra--bromo azobenzene (4Br-Azo). Two distinct crystal polymorphs were identified: the α-phase and β-phase. Notably, only the β-phase exhibited an extraordinary photosalient effect (jumping/breaking) upon exposure to a wide range of visible light.

Visualization of the Dynamics of Photoinduced Crawling Motion of 4-(Methylamino)Azobenzene Crystals via Diffracted X-ray Tracking.

The photoinduced crawling motion of crystals is a continuous motion that azobenzene molecular crystals exhibit under light irradiation. Such motion enables object manipulation at the microscale with a simple setup of fixed LED light sources. Transportation of nano-/micromaterials using photoinduced crawling motion has recently been reported.

Two-dimensional molecular networks at the solid/liquid interface and the role of alkyl chains in their building blocks.

Nanoarchitectonics has attracted increasing attention owing to its potential applications in nanomachines, nanoelectronics, catalysis, and nanopatterning, which can contribute to overcoming global problems related to energy and environment, among others. However, the fabrication of ordered nanoarchitectures remains a challenge, even in two dimensions. Therefore, a deeper understanding of the self-assembly processes and substantial factors for building ordered structures is critical for tailoring flexible and desirable nanoarchitectures.

Tuning the odd-even effect on two-dimensional assemblies of curcumin derivatives by alkyl chain substitution: a scanning tunnelling microscopy study.

Well-ordered molecular arrangement on surfaces is fundamental for fabrication of functional molecular devices which are of particular interest in nanotechnology. In addition to nano-manufacturing, the production of useful materials from natural resources has recently attracted increasing attention. Herein, we focused on the two-dimensional (2D) self-assemblies of curcumin derivatives.

Two-dimensional self-assemblies of azobenzene derivatives: effects of methyl substitution of azobenzene core and alkyl chain length.

Elucidating the correlation between the molecular arrangement and physical properties of organic compounds is critical to facilitating the development of advanced functional materials. X-ray structural analyses are generally performed to clarify this relationship. Several attempts have been made to ascertain the links between three-dimensional (3D) crystals and their two-dimensional (2D) structures, which can be revealed by scanning tunnelling microscopy (STM) at the molecular level.

Light-Driven Liquid Conveyors: Manipulating Liquid Mobility and Transporting Solids on Demand.

The intelligent transport of materials at interfaces is essential for a wide range of processes, including chemical microreactions, bioanalysis, and microfabrication. Both passive and active methods have been used to transport droplets, among which light-based techniques have attracted much attention because they are noncontact, safe, reversible, and controllable. However, conventional light-driven systems also involve challenges related to low transport ability and instability.

Photo-responsive hole formation in the monolayer membrane wall of a supramolecular nanotube for quick recovery of encapsulated protein.

Nanotubes with a single monolayer membrane wall comprised of a synthetic glycolipid and one of two synthetic azobenzene derivatives were assembled. X-ray diffraction, infrared, UV-visible, and circular dichroism spectroscopy clarified the embedding style of the azobenzene derivatives in the membrane wall, revealing that, depending on their different intermolecular hydrogen bond strengths, one azobenzene derivative was individually dispersed whereas the other formed a -type aggregate. The non-aggregated derivative was insensitive to UV irradiation due to tight fixation by the surrounding glycolipid.

Facile fabrication of self-assembled nanostructures of vertically aligned gold nanorods by using inkjet printing.

We demonstrated that the vertically aligned gold nanorods (AuNRs) were quickly and easily formed by using inkjet printing when aqueous dispersion of AuNRs containing a small amount of ethylene glycol (EG) was employed as an ink. It was observed that the content of EG in water suppressed rapid drying and convection in the droplets, which is favorable for the formation of the nanostructures.

Well-organised two-dimensional self-assembly controlled by formation of a Cu(II)-coordinated rufigallol derivative: a scanning tunnelling microscopy study.

The two-dimensional self-assembly of rufigallol derivatives and their metal coordination were studied by scanning tunnelling microscopy. Cu(II)-coordinated rufigallol derivatives exhibited columnar structures with some defects, whereas regular and linear structures were formed upon metal coordination at solid/liquid interfaces.

Green Superlubricity Enabled by Only One Water Droplet on Plant Oil-Infused Surfaces.

The increase in energy loss due to friction and the use of large amounts of lubricants to improve it are major challenges we face from a global environmental perspective. Pitcher-plant-inspired liquid-infused surfaces (LISs) are emerging super-repellent surfaces against liquids. However, their coefficient of friction (CoF) against solids is higher than that of conventional lubricant surfaces.

Photo-Induced Crawling Motion of Azobenzene Crystals on Modified Gold Surfaces.

Photo-induced crawling motion of a crystal of 3,3'-dimethylazobenzene (DMAB) on gold surfaces having different surface properties and various patterns was studied. DMAB crystals crawl continuously when exposed to UV and visible lights simultaneously from different directions. On a gold surface functionalized by a thiol having a hydroxyl group at the terminal (16-hydroxy-1-hexadecanethiol (HOCSH)), the crystals crawled with a relatively high velocity (ca.

Effect of Surface Properties on the Photo-Induced Crawling Motion of Azobenzene Crystals on Glass Surfaces.

Photo-induced crawling motion of a crystal of 3,3'-dimethylazobenzene (DMAB) on a glass substrate having different surface properties was studied. When exposed to UV and visible lights simultaneously from different directions, crystals crawl continuously on a glass surface. On a hydrophilic surface, the crystals crawled faster than those on other surfaces but crystals showed spreading while they moved.

Cephalopods-Inspired Rapid Self-Healing Nanoclay Composite Coatings with Oxygen Barrier and Super-Bubble-Phobic Properties.

Polymeric coatings with oxygen barrier properties are an important technology in food packaging that can extend the shelf life of food products and reduce waste. Although a typical technology in practical use is the deposition of metal or inorganic materials between multilayer films to reduce the oxygen transmission rate, once the film is damaged, oxygen permeates through the damaged area, damaging the packaged food. In addition, nanobrick wall structures consisting of nanoplatelet bricks have the potential to replace barrier films made of inorganic materials; however, they similarly lack repair performance or have slow repair speed despite having repair performance.

Size-controlled synthesis of cyclodextrin-capped gold nanoparticles for molecular recognition using surface-enhanced Raman scattering.

Cyclodextrin (CD)-capped gold nanoparticles (AuNPs) can be applied in sensing, catalysis, and self-assembly processes due to their molecular recognition ability. As the plasmon resonance of AuNPs depends on their size, the size-controlled synthesis of CD-capped AuNPs is essential for the development of these applications. Herein, we successfully synthesized β-CD-capped AuNPs with diameters of 24-85 nm using a seed-mediated growth method.

Light-Driven Dynamic Adhesion on Photosensitized Nematic Liquid Crystalline Elastomers.

In liquid crystal elastomers (LCEs), the internal mechanical loss increases around the nematic-isotropic phase transition and remains high all through the nematic phase, originating from the internal orientational relaxation related to the so-called "soft elasticity". Because the viscoelastic dissipation of the materials affects their adhesion properties, the nematic-isotropic phase transition can cause dramatic changes in the adhesion strength. Although the phase transitions can generally be induced by heat, here, we demonstrate the light-driven transition in dynamic adhesion in dye-doped nematic LCE.

Correction: Base-catalyzed C-alkylation of potassium enolates with styrenes via a metal-ene reaction: a mechanistic study.

Correction for 'Base-catalyzed C-alkylation of potassium enolates with styrenes via a metal-ene reaction: a mechanistic study' by Joshua P. Barham et al., Org.

Gold clay from self-assembly of 2D microscale nanosheets.

Nature has always demonstrated incredible ability to create amazing materials such as soft clay which are built from nanoplatelet packing structures. It is challenging to produce artificial clays owing to the difficulty in obtaining large volume fractions of nanoplatelets and the lack of structural control in layer-by-layer packing. Here, single-crystalline Au nanosheets are synthesized by controlled growth in the bilayer membranes of succinic acid surfactants.

Microwave Flow: A Perspective on Reactor and Microwave Configurations and the Emergence of Tunable Single-Mode Heating Toward Large-Scale Applications.

Microwave heating in chemical reactions was first reported in 1986. There have since been many reports employing microwave heating in organic chemistry, where microwave heating has afforded higher yields of products in shorter time periods. However, such reactions are challenging to scale in batch due to the limited penetration depth of microwaves as well as the wave propagation dependence on cavity size.

Light-induced mechanical response in crosslinked liquid-crystalline polymers with photoswitchable glass transition temperatures.

Energy conversion of light into mechanical work is of fundamental interest in applications. In particular, diligent molecular design on nanoscale, in order to achieve efficient photomechanical effects on macroscopic scale, has become one of the most interesting study topics. Here, by incorporating a "photomelting" azobenzene monomer crosslinked into liquid crystalline (LC) networks, we generate photoresponsive polymer films that exhibit reversible photoswitchable glass transition temperatures (T) at room temperature (~20 °C) and photomechanical actuations under the stimulus of UV/visible light.