Tissue Engineering 3D-Printed Scaffold Using Allograft/Alginate/Gelatin Hydrogels Coated With Platelet-Rich Fibrin or Adipose Stromal Vascular Fraction Induces Osteogenesis In Vitro.

Incorporating autologous patient-derived products has become imperative to enhance the continually improving outcomes in bone tissue engineering. With this objective in mind, this study aimed to evaluate the osteogenic potential of 3D-printed allograft-alginate-gelatin scaffolds coated with stromal vascular fraction (SVF) and platelet-rich fibrin (PRF). The primary goal was to develop a tissue-engineered construct capable of facilitating efficient bone regeneration through the utilization of biomaterials with advantageous properties and patient-derived products.

4D printing of smart scaffolds for bone regeneration: a systematic review.

As a novel emerging technology, four-dimensional (4D) printing allows the stimulation of 3D-printed materials in order to change shape, color, functionality, etc, over time. This systematic review is conducted to evaluate the purpose, materials, physiomechanical, and biological properties of 4D-printed scaffolds used for bone tissue engineering. An electronic search was conducted following the PRISMA 2020 guidelines in PubMed, Scopus, Web of Science, and Google Scholar online databases limited to English articles until April 2024.

Physicochemical and Biological Characterization of Gelatin/Alginate Scaffolds Reinforced with -TCP, FDBA, and SrHA: Insights into Stem Cell Behavior and Osteogenic Differentiation.

Bone tissue engineering necessitates the development of scaffolds with optimal properties to provide a suitable microenvironment for cell adhesion, proliferation, and osteogenic differentiation. The selection of appropriate scaffold materials remains a critical challenge in this field. In this study, we aimed to address this challenge by evaluating and comparing the performance of hydrogel scaffolds reinforced with -tricalcium phosphate (-TCP), allograft, and a combination of allograft and strontium hydroxyapatite (SrHA).

The impact of photobiomodulation on angiogenic differentiation of two different dental derived stem cells using two irradiation protocols: an in vitro investigation.

The present study aimed to compare the effect of photobiomodulation with different energy densities on the angiogenic differentiation of human periodontal ligament stem cells (hPDLSCs) and stem cells from human exfoliated deciduous teeth (SHED). Photobiomodulation therapy with a 660 nm diode laser (2.4 J/cm and 3.

Evaluating osteogenic potential of a 3D-printed bioceramic-based scaffold for critical-sized defect treatment: an in vivo and in vitro investigation.

The integration of precision medicine principles into bone tissue engineering has ignited a wave of research focused on customizing intricate scaffolds through advanced 3D printing techniques. Bioceramics, known for their exceptional biocompatibility and osteoconductivity, have emerged as a promising material in this field. This article aims to evaluate the regenerative capabilities of a composite scaffold composed of 3D-printed gelatin combined with hydroxyapatite/tricalcium phosphate bioceramics (G/HA/TCP), incorporating human dental pulp-derived stem cells (hDPSCs).

Effect of simultaneous and sequential use of TGF-β1 and TGF-β3 with FGF-2 on teno/ligamentogenic differentiation of periodontal ligament stem cells.

Objective: The periodontal ligament is a crucial part of the periodontium, and its regeneration is challenging. This study compares the effect of simultaneous and sequential use of FGF-2 and TGF-β1 with FGF-2 and TGF-β3 on the periodontal ligament stem cells (PDLSCs) teno/ligamentogenic differentiation.

Design: This study comprises ten different groups.

Evaluating the effect of strontium ranelate and photobiomodulation on cementogenic and osteogenic differentiation of buccal fat pad-derived stem cells: An in vitro study.

This study aimed to analyze the impact of strontium ranelate (Str), photobiomodulation (PBM), or their combination of the proliferation, osteogenic differentiation, and cementogenic differentiation of buccal fat pad-derived stem cells. BFPdSCs were exposed to one of the following interventions: (1) PBM (660 nm), (2) PBM (660 nm) + Str, (3) PBM (880 nm), (4) PBM (880 nm) + Str, (5) Str. All study groups had significantly higher osteogenic differentiation than the control group (p < 0.

Application of biodegradable Patient-specific scaffolds for maxillofacial bone regeneration: a scoping review of clinical studies.

This study aimed to systematically review clinical studies in which biodegradable patient-specific scaffolds were used for bone regeneration. Studies in which biodegradable scaffolds were fabricated through computer-assisted design and computer-assisted manufacturing (CAD-CAM) procedures were included. Those that applied non-biodegradable materials or used biodegradable materials in a condensable powder or block form were excluded.

Management of recurrent aphthous ulcers with therapeutic Nd:YAG laser, using two different methods.

Background: Low-level laser therapy (LLLT) has been applied for the management of craniomaxillofacial disorders, including intraoral wounds, as well as recurrent aphthous stomatitis (RAS) lesions. However, the proper combination of laser features and tissue characteristics remains the major challenge in the realm of photobiomodulation (PBM).

Objectives: The aim of the present study was to assess the feasibility of neodymium-doped yttrium aluminum garnet (Nd:YAG) laser therapy in treating RAS lesions, and to compare 2 techniques, different with regard to the distance between the fiber tip and the ulcer.

The effect of antibacterial photodynamic therapy with diode laser on chromogenic bacteria associated with dental black staining: An in-vitro study.

Background: Aggregatibacter actinomycetemcomitan (A.a) and Actinomyces naeslundii (A.n) are two gram-negative chromogenic bacteria involved in the formation of dental black stainings.

Bilayer scaffolds/membranes for bone tissue engineering applications: A systematic review.

Objective: This systematic review evaluates the purpose, materials, physio-mechanical, and biological effects of bilayer scaffolds/membranes used for bone tissue engineering applications.

Methods: A comprehensive electronic search of English-language literature from 2012 to October 2022 was conducted in PubMed, Scopus, ScienceDirect, and Google Scholar online databases according to the PRISMA 2020 guidelines. The quality of animal studies was evaluated through the SYRCLE's risk of bias tool.

Periosteum as a covering vascular flap in posterior mandibular augmentation: A retrospective cohort study.

Objective: To analyze the impact of creating periosteal vascular flaps on the amount of bone augmentation following inlay bone grafting (IBG) and cortical autogenous tenting (CAT).

Materials And Methods: This was a retrospective cohort study enrolling a sample cohort of patients presented to a private clinic in 2015 and 2019 for posterior mandibular ridge augmentation before dental implant placement. The predictor variables were surgical methods: CAT vs.

Comparative evaluation of the effects of three hydraulic calcium silicate cements on odontoblastic differentiation of human dental pulp stem cells: an in vitro study.

Objective: The study aimed to compare the response of human dental pulp stem cells (hDPSCs) towards three hydraulic calcium silicate cements (HCSCs) by measuring cytotoxicity and expression of dentinogenic genes.

Methodology: Dental pulps of five impacted mandibular third molars were extirpated as a source for hDPSCs. Next to culturing, hDPSCs were subjected to fluorescence-activated cell sorting after the third passage to validate stemness of the cells.

3D-printed MgO nanoparticle loaded polycaprolactone β-tricalcium phosphate composite scaffold for bone tissue engineering applications: In-vitro and in-vivo evaluation.

Magnesium (Mg) plays an important role in controlling bone apatite structure and density and is a potential bioactive material in repairing critical-sized bone defects. In this study, we aimed to evaluate the effect of adding NanoMgO to polycaprolactone/beta-tricalcium phosphate (PCL/β-TCP) scaffolds on bone regeneration. Novel 3D-printed porous PCL/β-TCP composite scaffolds containing 10% nanoMgO were fabricated by fused deposition modeling (FDM) and compared with PCL/β-TCP (1:1) scaffolds (control).

Current Trends, Advances, and Challenges of Tissue Engineering-Based Approaches of Tooth Regeneration: A Review of the Literature.

Introduction: Tooth loss is a significant health issue. Currently, this situation is often treated with the use of synthetic materials such as implants and prostheses. However, these treatment modalities do not fully meet patients' biological and mechanical needs and have limited longevity.

Prefabrication technique by preserving a muscular pedicle from masseter muscle as an in vivo bioreactor for reconstruction of mandibular critical-sized bone defects in canine models.

In vivo bioreactors serve as regenerative niches that improve vascularization and regeneration of bone grafts. This study has evaluated the masseter muscle as a natural bioreactor for βTCP or PCL/βTCP scaffolds, in terms of bone regeneration. The effect of pedicle preservation, along with sole, or MSC- or rhBMP2-combined application of scaffolds, has also been studied.

Evaluating the Preemptive Analgesic Effect of Photo-biomodulation Therapy on Pain Perception During Local Anesthesia Injection in Children: A Split-mouth Triple-blind Randomized Controlled Clinical Trial.

To evaluate the impact of photobiomodulation therapy (PBMT) on injection pain perception and compare it with a topical oral anesthetic gel. A total of 30 patients of 6 to 9 years-old seeking pulpotomy treatment of maxillary secondary primary molars of both sides were considered for this split-mouth triple-blind randomized clinical trial. On one side of the maxilla, the low-level laser (diode laser, 808 nm, 250 mW; 16.

Identification Osteogenic Signaling Pathways Following Mechanical Stimulation: A Systematic Review.

Introduction: It has been shown that mechanical forces can induce or promote osteogenic differentiation as well as remodeling of the new created bone tissues. To apply this characteristic in bone tissue engineering, it is important to know which mechanical stimuli through which signaling pathway has a more significant impact on osteogenesis.

Methods: In this systematic study, an electronic search was conducted using PubMed and Google Scholar databases.

Fabrication of Decellularized Engineered Extracellular Matrix through Bioreactor-Based Environment for Bone Tissue Engineering.

Extracellular matrix (ECM)-contained grafts can be achieved by decellularization of native bones or synthetic scaffolds. Limitations associated with harvesting the native bone has raised interest in preparing in vitro ECM bioscaffold for bone tissue engineering. Here, we intend to develop an ECM-contained construct via decellularizing an engineered gelatin-coated β-tricalcium phosphate (gTCP) scaffold.

Effect of Photobiomodulation on Relapse in an Experimental Rapid Maxillary Expansion Model in Rat.

Rapid maxillary expansion (RME) is performed on transversely deficient maxilla. As all orthodontic treatments, retention is important in maintaining therapeutic outcomes. Fixed /removable retainers are used post-RME causing hygiene and compliance problems.

Therapeutic Metallic Ions in Bone Tissue Engineering: A Systematic Review of The Literature.

An important field of bone tissue engineering (BTE) concerns the design and fabrication of smart scaffolds capable of inducing cellular interactions and differentiation of osteo-progenitor cells. One of these additives that has gained growing attention is metallic ions as therapeutic agents (MITAs). The specific biological advantage that these ions bring to scaffolds as well as other potential mechanical, and antimicrobial enhancements may vary depending on the ion entity, fabrication method, and biomaterials used.

Cartilage regeneration with dual-drug-releasing injectable hydrogel/microparticle system: In vitro and in vivo study.

In this study, we developed an injectable in situ forming hydrogel/microparticle system consisting of two drugs, melatonin and methylprednisolone, to investigate the capability of the system for chondrogenesis in vitro and in vivo. The chemical, mechanical, and rheological properties of the hydrogel/microparticle were investigated. For in vitro evaluation, the adipose-derived stem cells might be mixed with hydrogel/microparticles, then cellular viability was analyzed by acridine orange/propidium iodide and 4',6-diamidino-2-phenylindole staining and also dimethylmethylene blue assay were conducted to find the amount of proteoglycan.