Multiple beam coherent combination via an optical ring resonator.

Future gravitational wave detectors (GWDs) require low noise, single frequency, continuous wave lasers with excellent beam quality and powers in excess of 500 W. Low noise laser amplifiers with high spatial purity have been demonstrated up to 300 W. For higher powers, coherent beam combination can overcome scaling limitations.

Point absorbers in Advanced LIGO.

Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nanometer scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduce the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power buildup in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers).

Low noise 400 W coherently combined single frequency laser beam for next generation gravitational wave detectors.

Design studies for the next generation of interferometric gravitational wave detectors propose the use of low-noise single-frequency high power laser sources at 1064 nm. Fiber amplifiers are a promising design option because of their high output power and excellent optical beam properties. We performed filled-aperture coherent beam combining with independently amplified beams from two low-noise high-power single-frequency fiber amplifiers to further scale the available optical power.

Sequential high power laser amplifiers for gravitational wave detection.

Advanced gravitational wave detectors require highly stable, single mode, single frequency and linear polarized laser systems. They have to deliver an output power of ∼200 W and need to provide suitable actuators for further stabilization via fast, low noise feedback control systems. We present such a laser system based on sequential Nd:YVO amplifiers and its integration into a typical laser stabilization environment.

Performance study of a high-power single-frequency fiber amplifier architecture for gravitational wave detectors.

The next generation of interferometric gravitational wave detectors will use low-noise single-frequency laser sources at 1064 nm. Fiber amplifiers are a promising design option because of high efficiency, compact design, and superior optical beam properties compared to the current generation of laser sources for gravitational wave detectors. We developed a reliable 200 W single-frequency fiber amplifier architecture to meet the application requirements regarding relative power noise, relative pointing noise, frequency noise, linear polarization, and beam quality.

High power, single-frequency, monolithic fiber amplifier for the next generation of gravitational wave detectors.

Low noise, high power single-frequency lasers and amplifiers are key components of interferometric gravitational wave detectors. One way to increase the detector sensitivity is to increase the power injected into the interferometers. We developed a fiber amplifier engineering prototype with a pump power limited output power of 200 W at 1064 nm.

Nd:YVO high-power master oscillator power amplifier laser system for second-generation gravitational wave detectors.

Ultrastable high-power laser systems are essential components of the long baseline interferometers that detected the first gravitational waves from merging black holes and neutron stars. One way to further increase the sensitivity of current generation gravitational wave detectors (GWDs) is to increase the laser power injected into the interferometers. In this Letter, we describe and characterize a 72 W and a 114 W linearly polarized, single-frequency laser system at a wavelength of 1064 nm, each based on single-pass : power amplifiers.