Exogenous Cytokinin 4PU-30 Modulates the Response of Wheat and Einkorn Seedlings to Ultraviolet B Radiation.

Abiotic stress is responsible for a significant reduction in crop plant productivity worldwide. Ultraviolet (UV) radiation is a natural component of sunlight and a permanent environmental stimulus. This study investigated the distinct responses of young wheat and einkorn plants to excessive UV-B radiation (180 min at λ 312 nm) following foliar pretreatment with 1 µM synthetic cytokinin 4PU-30.

3D-printed large-area focused grid for scatter reduction in cone-beam CT.

Background: Cone-beam computed tomography (CBCT) systems acquire volumetric data more efficiently than fan-beam or multislice CT, particularly when the anatomy of interest resides within the axial field-of-view of the detector and data can be acquired in one rotation. For such systems, scattered radiation remains a source of image quality degradation leading to increased noise, image artifacts, and CT number inaccuracies.

Purpose: Recent advances in metal additive manufacturing allow the production of highly focused antiscatter grids (2D-ASGs) that can be used to reduce scatter intensity, while preserving primary radiation transmission.

Localized Oxygen Exchange Platform for Intravital Video Microscopy Investigations of Microvascular Oxygen Regulation.

Intravital microscopy has proven to be a powerful tool for studying microvascular physiology. In this study, we propose a gas exchange system compatible with intravital microscopy that can be used to impose gas perturbations to small localized regions in skeletal muscles or other tissues that can be imaged using conventional inverted microscopes. We demonstrated the effectiveness of this system by locally manipulating oxygen concentrations in rat muscle and measuring the resulting vascular responses.

Image-based design and 3D-metal printing of a rat hip implant for use in a clinically representative model of joint replacement.

The aim of this study was to obtain micro-computed tomography derived measurements of the rat proximal femur, to create parameterized rat hip implants that could be surgically installed in a clinically representative small animal model of joint replacement. The proximal femoral anatomy of N = 25 rats (male, Sprague-Dawley, 390-605 g) was quantified. Key measurements were used to parameterize computer-aided design models of monoblock rat femoral implants.

Vibration of osteoblastic cells using a novel motion-control platform does not acutely alter cytosolic calcium, but desensitizes subsequent responses to extracellular ATP.

Low-magnitude high-frequency mechanical vibration induces biological responses in many tissues. Like many cell types, osteoblasts respond rapidly to certain forms of mechanostimulation, such as fluid shear, with transient elevation in the concentration of cytosolic free calcium ([Ca ] ). However, it is not known whether vibration of osteoblastic cells also induces acute elevation in [Ca ] .

Development and Assessment of a Microcomputed Tomography Compatible Five Degrees-of-Freedom Knee Joint Motion Simulator.

Currently available knee joint kinematic tracking systems fail to nondestructively capture the subtle variation in joint and soft tissue kinematics that occur in native, injured, and reconstructed joint states. Microcomputed tomography (CT) imaging has the potential as a noninvasive, high-resolution kinematic tracking system, but no dynamic simulators exist to take advantage of this. The purpose of this work was to develop and assess a novel micro-CT compatible knee joint simulator to quantify the knee joint's kinematic and kinetic response to clinically (e.

Marker-based technique for visualizing radiolucent implant components in radiographic imaging.

Radiography is the predominant imaging modality used for the in-vivo analysis of orthopaedic implants. A major disadvantage of radiography is that the articulating joint components that are composed of radiolucent polyethylene cannot be directly visualized. Current strategies attempt to circumvent this limitation by estimating component positions and simplifying the joint system, however, these approaches lead to a number of associated errors.

Evaluation of the effect of custom burr holes on a surgeon's sense of screw fixation in revision porous metal cups.

Background/aims: It is common practice to burr custom holes in revision porous metal cups for screw insertion. The objective of this study was to determine how different hole types affect a surgeon's sense of screw fixation.

Methods: Porous revision cups were prepared with pre-drilled and custom burred holes.

Practical fabrication of microfluidic platforms for live-cell microscopy.

We describe a simple fabrication technique - targeted towards non-specialists - that allows for the production of leak-proof polydimethylsiloxane (PDMS) microfluidic devices that are compatible with live-cell microscopy. Thin PDMS base membranes were spin-coated onto a glass-bottom cell culture dish and then partially cured via microwave irradiation. PDMS chips were generated using a replica molding technique, and then sealed to the PDMS base membrane by microwave irradiation.

Quantification of mouse in vivo whole-body vibration amplitude from motion-blur using x-ray imaging.

Musculoskeletal effects of whole-body vibration on animals and humans have become an intensely studied topic recently, due to the potential of applying this method as a non-pharmacological therapy for strengthening bones. It is relatively easy to quantify the transmission of whole-body mechanical vibration through the human skeletal system using accelerometers. However, this is not the case for small-animal pre-clinical studies because currently available accelerometers have a large mass, relative to the mass of the animals, which causes the accelerometers themselves to affect the way vibration is transmitted.

Metrology test object for dimensional verification in additive manufacturing of metals for biomedical applications.

Additive manufacturing continues to increase in popularity and is being used in applications such as biomaterial ingrowth that requires sub-millimeter dimensional accuracy. The purpose of this study was to design a metrology test object for determining the capabilities of additive manufacturing systems to produce common objects, with a focus on those relevant to medical applications. The test object was designed with a variety of features of varying dimensions, including holes, cylinders, rectangles, gaps, and lattices.

Quantification of in vivo implant wear in total knee replacement from dynamic single plane radiography.

An in vivo method to measure wear in total knee replacements was developed using dynamic single-plane fluoroscopy. A dynamic, anthropomorphic total knee replacement phantom with interchangeable, custom-fabricated components of known wear volume was created, and dynamic imaging was performed. For each frame of the fluoroscopy data, the relative location of the femoral and tibial components were determined, and the apparent intersection of the femoral component with the tibial insert was used to calculate wear volume, wear depth, and frequency of intersection.

Evaluation of distal turbulence intensity for the detection of both plaque ulceration and stenosis grade in the carotid bifurcation using clinical Doppler ultrasound.

Objectives: To determine the interrelationship of stenosis grade and ulceration with distal turbulence intensity (TI) in the carotid bifurcation measured using conventional clinical Doppler ultrasound (DUS) in vitro, in order to establish the feasibility of TI as a diagnostic parameter for plaque ulceration.

Methods: DUS TI was evaluated in a matched set of ulcerated and smooth-walled carotid bifurcation phantoms with various stenosis severities (30, 50, 60 and 70 %), where the ulcerated models incorporated a type 3 ulceration.

Results: Post-stenotic TI was significantly elevated owing to ulceration in the mild and moderate stenoses (P < 0.

Design and construction of a multipath vessel phantom for interventional training.

This short communication reports on the design and construction of a catheter manipulation skill enhancement phantom for use by residents and fellows outside the clinical environment. The phantom contains a variety of path trajectories and vessel diameter transitions, allowing trainees to manipulate catheters through vessel paths of varying difficulty. The multipath phantom, which is easy to construct and provides easily visualised paths, provides a simple, cost-effective training platform to facilitate and accelerate interventional training.

[Numbers of lymph nodes in large intestinal resections for colorectal carcinoma].

Introduction: Precise evaluation of lymph nodes in the surgical specimen is crucial for the staging and subsequent decision about the adjuvant therapy in colorectal cancer. Prognosis of the patients can be assessed only in cases when at least 12 lymph nodes in the surgical specimen are examined.

Aim Of The Work: To evaluate the radicalism of resections for colorectal carcinoma after introducing laparoscopic approach.

Micro-CT-compatible technique for measuring self-expanding stent forces.

Purpose: To develop and evaluate a technique for measuring the radial resistive force, chronic outward force, and dimensions of self-expanding stents.

Materials And Methods: A Mylar film was looped around the stent, threaded through two carbon fiber rods, and immersed in a 37 degrees C oil bath. A force gauge mounted on a micro-positioning stage was used to measure the applied forces.

Clinical Doppler ultrasound for the assessment of plaque ulceration in the stenosed carotid bifurcation by detection of distal turbulence intensity: a matched model study.

The assessment of flow disturbances due to carotid plaque ulceration may provide added diagnostic information to Doppler ultrasound (DUS) of the carotid stenosis, and indicate whether the associated hemodynamics are a potential thromboembolic source. We evaluated the effect of ulceration in a moderately stenosed carotid bifurcation on distal turbulence intensity (TI) measured using clinical DUS in matched anthropomorphic models. Several physiologically relevant ulcer geometries (hemispherical, mushroom-shaped, and ellipsoidal pointing distally and proximally) and sizes (2-mm, 3-mm and 4-mm diameter hemispheres) were investigated.

In vitro Doppler ultrasound investigation of turbulence intensity in pulsatile flow with simulated cardiac variability.

An in vitro investigation of turbulence intensity (TI) associated with a severe carotid stenosis in the presence of physiological cardiac variability is described. The objective of this investigation was to determine if fluctuations due to turbulence could be quantified with conventional Doppler ultrasound (DUS) in the presence of normal physiological cycle-to-cycle cardiac variability. An anthropomorphic model of a 70% stenosed carotid bifurcation was used in combination with a programmable flow pump to generate pulsatile flow with a mean flow rate of 6 mL/s.

PIV-measured versus CFD-predicted flow dynamics in anatomically realistic cerebral aneurysm models.

Computational fluid dynamics (CFD) modeling of nominally patient-specific cerebral aneurysms is increasingly being used as a research tool to further understand the development, prognosis, and treatment of brain aneurysms. We have previously developed virtual angiography to indirectly validate CFD-predicted gross flow dynamics against the routinely acquired digital subtraction angiograms. Toward a more direct validation, here we compare detailed, CFD-predicted velocity fields against those measured using particle imaging velocimetry (PIV).

Doppler ultrasound compatible plastic material for use in rigid flow models.

A technique for the rapid but accurate fabrication of multiple flow phantoms with variations in vascular geometry would be desirable in the investigation of carotid atherosclerosis. This study demonstrates the feasibility and efficacy of implementing numerically controlled direct-machining of vascular geometries into Doppler ultrasound (DUS)-compatible plastic for the easy fabrication of DUS flow phantoms. Candidate plastics were tested for longitudinal speed of sound (SoS) and acoustic attenuation at the diagnostic frequency of 5 MHz.

A quality assurance phantom for the performance evaluation of volumetric micro-CT systems.

Small-animal imaging has recently become an area of increased interest because more human diseases can be modeled in transgenic and knockout rodents. As a result, micro-computed tomography (micro-CT) systems are becoming more common in research laboratories, due to their ability to achieve spatial resolution as high as 10 microm, giving highly detailed anatomical information. Most recently, a volumetric cone-beam micro-CT system using a flat-panel detector (eXplore Ultra, GE Healthcare, London, ON) has been developed that combines the high resolution of micro-CT and the fast scanning speed of clinical CT, so that dynamic perfusion imaging can be performed in mice and rats, providing functional physiological information in addition to anatomical information.

Virtual angiography for visualization and validation of computational models of aneurysm hemodynamics.

It has recently become possible to simulate aneurysmal blood flow dynamics in a patient-specific manner via the coupling of three-dimensional (3-D) X-ray angiography and cmputational fluid dynamics (CFD). Before such image-based CFD models can be used in a predictive capacity, however, it must be shown that they indeed reproduce the in vivo hemodynamic environment. Motivated by the fact that there are currently no techniques for adequately measuring complex blood velocity fields in vivo, in this paper we describe how cine X-ray angiograms may be simulated for the purpose of indirectly validating patient-sperific CFD models.

Prospective respiratory-gated micro-CT of free breathing rodents.

Microcomputed tomography (Micro-CT) has the potential to noninvasively image the structure of organs in rodent models with high spatial resolution and relatively short image acquisition times. However, motion artifacts associated with the normal respiratory motion of the animal may arise when imaging the abdomen or thorax. To reduce these artifacts and the accompanying loss of spatial resolution, we propose a prospective respiratory gating technique for use with anaesthetized, free-breathing rodents.

Multisite trial of MR flow measurement: phantom and protocol design.

Purpose: To describe a portable, easily assembled phantom with well-defined bore geometry together with a series of tests that will form the basis of a standardized quality assurance protocol in a multicenter trial of flow measurement by the MR phase mapping technique.

Materials And Methods: The phantom consists of silicone polymer layers containing parallel straight and stenosed flow channels in one layer and a U-bend in a second layer, separated by hermetically sealed agarose slabs. The phantom is constructed by casting low melting-point metal in an aluminum mold precisely milled to the desired geometry, and then using the low melting-point metal core as a negative around which the silicone is allowed to set.

Correction of XRII geometric distortion using a liquid-filled grid and image subtraction.

X-ray image intensifier (XRII) geometric distortion reduces the accuracy of image-guided procedures and quantitative image reconstructions. Due to the dependence of this error on the earth's magnetic field, the required correction is angle dependent, and calibration data should ideally be acquired simultaneously with clinical image data, at a specific orientation. We describe a technique to correct XRII geometric image distortion at any angular position during a stereotactic procedure.