The effect of impression technique and implant angulation on the impression accuracy of external- and internal-connection implants.

Purpose: The purpose of this in vitro study was to investigate the effect of impression technique and implant angulation on the impression accuracy of external- and internal-connection implants using a novel experimental device.

Materials And Methods: An experimental device was designed and fabricated to make in vitro impressions by means of open- and closed-tray techniques. Impressions of eight implants with two different connections (four external-hex and four internal-hex) at three angulations (0, 15, and 25 degrees) were made using a medium-consistency polyether material.

Three-dimensional positional changes of teeth adjacent to posterior edentulous spaces in relation to age at time of tooth loss and elapsed time.

The purpose of this study was to study the stability of teeth adjacent to posterior edentulous spaces and correlate it with patient age and time lapse since tooth loss. Dental casts, panoramic radiographs, and questionnaires of patients treated in a University setting were employed. Teeth adjacent and opposing posterior edentulous spaces were examined for the following parameters: Supraeruption, rotation, space closure, and axial inclination.

Computer methods for automating preoperative dental implant planning: implant positioning and size assignment.

The paper presents computer-aided methods that allocate a dental implant and suggest its size, during the pre-operative planning stage, in conformance with introduced optimization criteria and established clinical requirements. Based on computed tomography data of the jaw and prosthesis anatomy, single tooth cases are planned for the best-suited implant insertion at a user-defined region. An optimum implantation axis line is produced and cylindrical implants of various candidate sizes are then automatically positioned, while their occlusal end is leveled to bone ridge, and evaluated.

Comparison of temperature increase in the pulp chamber during the polymerization of materials used for the direct fabrication of provisional restorations.

Statement Of Problem: Polymerization of resin materials used for the fabrication of provisional restorations is associated with an exothermic reaction. This temperature rise may present a serious biological problem, since it can cause iatrogenic thermal trauma to the pulp.

Purpose: This in vitro study compared the temperature increase in the pulp chamber of a molar placed in contact with different resins used for the direct fabrication of provisional restorations.

Bonding indirect resin composites to metal: part 2. Effect of alloy surface treatment on elemental composition of alloy and bond strength.

Purpose: This laboratory study compared the effect of different surface treatments of a medium-gold, high-noble alloy on the shear bond strength of an indirect, highly filled resin composite to the alloy and on the elemental composition of the alloy surface.

Materials And Methods: Ninety disks, cast in a medium-gold, high-noble porcelain-fused-to-metal alloy (V-Deltaloy), received three different surface treatments: sandblasting with 50-microm Al2O3 (group 1) or 250-microm Al2O3 (group 2) and chemical agents, or with 250-microm Al2O3 without chemical agents (group 3) prior to bonding of an indirect resin composite (Artglass, and chemical agents Siloc-pre and Siloc-bond). The specimens were tested in shear, half of them after 24-hour dry storage at room temperature and the rest after 10-day storage in normal saline solution at 37 degrees C and thermocycling (2,500 cycles between 5 and 55 degrees C).

Bonding indirect resin composites to metal: Part 1. Comparison of shear bond strengths between different metal-resin bonding systems and a metal-ceramic system.

Purpose: This laboratory study compared the shear bond strength between three indirect resin composites and a noble alloy using their respective bonding systems.

Materials And Methods: One hundred twenty disks cast in a medium-gold, high-noble metal-ceramic alloy (V-Deltaloy) were divided equally into four groups and received different treatments for veneering: Conventional feldspathic porcelain (Omega) was applied on one set of specimens to be used as a control, and three indirect resin composites (Artglass, Sculpture, Targis) with their respective bonding systems were used for the other groups. The specimens were tested in a parallel shear test, half of them after 24-hour dry storage at room temperature and the rest after 10-day storage in normal saline solution at 37 degrees C and thermocycling.