Mechanically Robust Interface at Metal/Muscovite Quasi van der Waals Epitaxy.

Quasi van der Waals epitaxy is an approach to constructing the combination of 2D and 3D materials. Here, we quantify and discuss the 2D/3D interface structure and the corresponding features in metal/muscovite systems. High-resolution scanning transmission electron microscopy reveals the atomic arrangement at the interface.

A neural network framework for immediate temperature prediction of surgical hand-held drilling.

Background And Objective: Heat generation and associated temperature rise in surgical drilling can cause irreversible tissue damage. It is nearly impossible to provide immediate temperature prediction for a hand-held drilling process since both feed rate and motion vary with time. The objective of this study is to present and test a framework for immediate bone drilling temperature visualization based on a neural network (NN) model and a linear time-invariant (LTI) model.

Prediction of Bone Healing around Dental Implants in Various Boundary Conditions by Deep Learning Network.

Tissue differentiation varies based on patients' conditions, such as occlusal force and bone properties. Thus, the design of the implants needs to take these conditions into account to improve osseointegration. However, the efficiency of the design procedure is typically not satisfactory and needs to be significantly improved.

Mechanical performance of porous biomimetic intervertebral body fusion devices: an in vitro biomechanical study.

Background: Degenerative disc disease is one of the most common ailments severely affecting the quality of life in elderly population. Cervical intervertebral body fusion devices are utilized to provide stability after surgical intervention for cervical pathology. In this study, we design a biomimetic porous spinal cage, and perform mechanical simulations to study its performances following American Society for Testing and Materials International (ASTM) standards before manufacturing to improve design process and decrease cost and consumption of material.

Effect of serrated grain boundary on tensile and creep properties of a precipitation strengthened high entropy alloy.

In this study, tensile and creep deformation of a high-entropy alloy processed by selective laser melting (SLM) has been investigated; hot ductility drop was identified at first, and the loss of ductility at elevated temperature was associated with intergranular fracture. By modifying the grain boundary morphology from straight to serration, the hot ductility drop issue has been resolved successfully. The serrated grain boundary could be achieved by reducing the cooling rate of solution heat treatment, which allowed the coarsening of L1 structured γ' precipitates to interfere with mobile grain boundaries, resulting in undulation of the grain boundary morphology.

Effect of Tin Grain Orientation on Electromigration-Induced Dissolution of Ni Metallization in SnAg Solder Joints.

In this study, symmetrical solder joints (Cu/Ni/SnAg/Ni/Cu) were fabricated. They were electromigration (EM)-stressed at high (8 × 10 A/cm) or low (1.6 × 10 A/cm) current densities.

Enhancement of fatigue resistance by recrystallization and grain growth to eliminate bonding interfaces in Cu-Cu joints.

Cu-Cu joints have been adopted for ultra-high density of packaging for high-end devices. However, cracks may form and propagate along the bonding interfaces during fatigue tests. In this study, Cu-Cu joints were fabricated at 300 °C by bonding 〈111〉-oriented nanotwinned Cu microbumps with 30 μm in diameter.

Failures of Cu-Cu Joints under Temperature Cycling Tests.

In this study, the failure mechanisms of Cu-Cu joints under thermal cycling were investigated. Two structures of dielectrics (PBO/underfill/PBO and SiO) were employed to seal the joints. Stress gradients induced in the joints with the different dielectrics were simulated using a finite element method (FEM) and correlated with experimental observations.

Artificial intelligence deep learning for 3D IC reliability prediction.

Three-dimensional integrated circuit (3D IC) technologies have been receiving much attention recently due to the near-ending of Moore's law of minimization in 2D IC. However, the reliability of 3D IC, which is greatly influenced by voids and failure in interconnects during the fabrication processes, typically requires slow testing and relies on human's judgement. Thus, the growing demand for 3D IC has generated considerable attention on the importance of reliability analysis and failure prediction.

Flexible Optogenetic Transducer Device for Remote Neuron Modulation Using Highly Upconversion-Efficient Dendrite-Like Gold Inverse Opaline Structure.

A remote optogenetic device for analyzing freely moving animals has attracted extensive attention in optogenetic engineering. In particular, for peripheral nerve regions, a flexible device is needed to endure the continuous bending movements of these areas. Here, a remote optogenetic optical transducer device made from a gold inverse opaline skeleton grown with a dendrite-like gold nanostructure (D-GIOF) and chemically grafted with upconversion nanoparticles (UCNPs) is developed.

Engineer design process assisted by explainable deep learning network.

Engineering simulation accelerates the development of reliable and repeatable design processes in various domains. However, the computing resource consumption is dramatically raised in the whole development processes. Making the most of these simulation data becomes more and more important in modern industrial product design.

4D spatiotemporal modulation of biomolecules distribution in anisotropic corrugated microwrinkles via electrically manipulated microcapsules within hierarchical hydrogel for spinal cord regeneration.

Although traditional 3D scaffolds or biomimetic hydrogels have been used for tissue engineering and regenerative medicine, soft tissue microenvironment usually has a highly anisotropic structure and a dynamically controllable deformation with various biomolecule distribution. In this study, we developed a hierarchical hybrid gelatin methacrylate-microcapsule hydrogel (HGMH) with Neurotrophin-3(NT-3)-loaded PLGA microcapsules to fabricate anisotropic structure with patterned NT-3 distribution (demonstrated as striped and triangular patterns) by dielectrophoresis (DEP). The HGMH provides a dynamic biomimetic sinuate-microwrinkles change with NT-3 spatial gradient and 2-stage time-dependent distribution, which was further simulated using a 3D finite element model.

Healing Pattern Analysis for Dental Implants Using the Mechano-Regulatory Tissue Differentiation Model.

(1) Background: Our aim is to reveal the influence of the geometry designs on biophysical stimuli and healing patterns. The design guidelines for dental implants can then be provided. (2) Methods: A two-dimensional axisymmetric finite element model was developed based on mechano-regulatory algorithm.

Investigation of Bone Growth in Additive-Manufactured Pedicle Screw Implant by Using Ti-6Al-4V and Bioactive Glass Powder Composite.

In this study, we optimized the geometry and composition of additive-manufactured pedicle screws. Metal powders of titanium-aluminum-vanadium (Ti-6Al-4V) were mixed with reactive glass-ceramic biomaterials of bioactive glass (BG) powders. To optimize the geometry of pedicle screws, we applied a novel numerical approach to proposing the optimal shape of the healing chamber to promote biological healing.

Novel design of additive manufactured hollow porous implants.

Objective: Our aim is to examine the mechanical properties of two types of additive manufactured hollow porous dental implants and 6 and 12-week bone ingrowth after insertion in animals. A 3D numerical model is also developed to show detailed tissue differentiation and to provide design guidelines for implants.

Methods: The two porous and a commercial dental implant were studied by series of in vitro mechanical tests (three-point bending, torsional, screwing torque, and sawbone pull-out tests).

Deformations of Ti-6Al-4V additive-manufacturing-induced isotropic and anisotropic columnar structures: measurements and underlying mechanisms.

The deformations of isotropic and anisotropic Ti-6Al-4V columnar structures fabricated by additive manufacturing were extensively examined. The distinct texture and microstructure distributions were characterised. X-ray diffraction measurements show different lattice activities resulting from the different microstructure distributions.

A Hybrid Model for Predicting Bone Healing around Dental Implants.

Background: The effect of the short-term bone healing process is typically neglected in numerical models of bone remodeling for dental implants. In this study, a hybrid two-step algorithm was proposed to enable a more accurate prediction for the performance of dental implants.

Methods: A mechano-regulation algorithm was firstly used to simulate the tissue differentiation around a dental implant during the short-term bone healing.

Giant Resistivity Change of Transparent ZnO/Muscovite Heteroepitaxy.

The piezoresistive effect has shown a remarkable potential for mechanical sensor applications and been sought for its excellent performance. A great attention was paid to the giant piezoresistive effect and sensitivity delivered by silicon-based nanostructures. However, low thermal stability and complicated fabrication process hinder their practical applications.

Control of Dopant Distribution in Yttrium-Doped Bioactive Glass for Selective Internal Radiotherapy Applications Using Spray Pyrolysis.

In this study, we demonstrate the fabrication of Y-doped bioactive glass (BG), which is proposed as a potential material for selective internal radiotherapy applications. Owing to its superior bioactivity and biodegradability, it overcomes the problem of yttrium aluminosilicate spheres that remain in the host body for a long duration after treatment. The preparation of Y-doped BG powders were carried out using a spray pyrolysis method.

The Analysis of Superelasticity and Microstructural Evolution in NiTi Single Crystals by Molecular Dynamics.

Superelasticity in shape memory alloys is an important feature for actuators and medical devices. However, the function of the devices is typically limited by mechanical bandwidth and fatigue, which are dominated by the microstructures. Thus, in order to correlate the mechanical response and the microstructures, the microstructural evolution in NiTi single crystals under the compression, tensile, and shearing tests is simulated by molecular dynamics (MD) in the current study.

Numerical Method for the Design of Healing Chamber in Additive-Manufactured Dental Implants.

The inclusion of a healing chamber in dental implants has been shown to promote biological healing. In this paper, a novel numerical approach to the design of the healing chamber for additive-manufactured dental implants is proposed. This study developed an algorithm for the modeling of bone growth and employed finite element method in ANSYS to facilitate the design of healing chambers with a highly complex configuration.

Relationships among the structural topology, bond strength, and mechanical properties of single-walled aluminosilicate nanotubes.

Carbon nanotubes (CNTs) are regarded as small but strong due to their nanoscale microstructure and high mechanical strength (Young's modulus exceeds 1000 GPa). A longstanding question has been whether there exist other nanotube materials with mechanical properties as good as those of CNTs. In this study, we investigated the mechanical properties of single-walled aluminosilicate nanotubes (AlSiNTs) using a multiscale computational method and then conducted a comparison with single-walled carbon nanotubes (SWCNTs).

A Review of Domain Modelling and Domain Imaging Techniques in Ferroelectric Crystals.

The present paper reviews models of domain structure in ferroelectric crystals, thin films and bulk materials. Common crystal structures in ferroelectric materials are described and the theory of compatible domain patterns is introduced. Applications to multi-rank laminates are presented.