A fast and reliable DSC-based method to determine the monomolecular loading capacity of drugs with good glass-forming ability in mesoporous silica.

The aim of this study was to introduce a fast and reliable differential scanning calorimetry (DSC)-based method to determine the monomolecular loading capacity of drugs with good glass-forming ability in mesoporous silica (MS). The proposed method is based on a solvent-free melting/fusion of drug into the MS during a heat-cool-heat cycle in the DSC. Overloaded drug-MS systems were analyzed in the DSC at different drug ratios (50, 60, 70, 80 and 90% w/w) to quantify the excess drug in the (the fraction not adsorbed to the MS surface).

Comparison of two DSC-based methods to predict drug-polymer solubility.

The aim of the present study was to compare two DSC-based methods to predict drug-polymer solubility (melting point depression method and recrystallization method) and propose a guideline for selecting the most suitable method based on physicochemical properties of both the drug and the polymer. Using the two methods, the solubilities of celecoxib, indomethacin, carbamazepine, and ritonavir in polyvinylpyrrolidone, hydroxypropyl methylcellulose, and Soluplus® were determined at elevated temperatures and extrapolated to room temperature using the Flory-Huggins model. For the melting point depression method, it was observed that a well-defined drug melting point was required in order to predict drug-polymer solubility, since the method is based on the depression of the melting point as a function of polymer content.

A heuristic model to quantify the impact of excess cyclodextrin on oral drug absorption from aqueous solution.

The intestinal drug solubilising capacity (Dtot(SC)) of a drug formulated as an aqueous cyclodextrin solution is a recently proposed quantity to predict the cyclodextrin concentration needed to fully solubilise the drug in the intestinal lumen. According to this concept, the cyclodextrin concentration in the drug product must be higher than the amount needed to solubilise the compound, due to the displacement of the drug from the cyclodextrin cavity by bile salts in the intestinal lumen. On the other hand, dosing cyclodextrin at >Dtot(SC) is expected to result in decreased free intestinal drug concentrations and thus potentially a lower fraction absorbed.

Influence of PVP/VA copolymer composition on drug-polymer solubility.

In this study, the influence of copolymer composition on drug-polymer solubility was investigated. The solubility of the model drug celecoxib (CCX) in various polyvinylpyrrolidone/vinyl acetate (PVP/VA) copolymer compositions (70/30, 60/40, 50/50 and 30/70 w/w) and the pure homopolymers polyvinylpyrrolidone (PVP) and polyvinyl acetate (PVA) was predicted at 25 °C using a thermal analysis method based on the recrystallization of a supersaturated amorphous dispersion (recrystallization method). These solubilities were compared with a prediction based on the solubility of CCX in the liquid monomeric precursors of PVP/VA, N-vinylpyrrolidone (NVP) and vinyl acetate (VA), using the Flory-Huggins lattice theory (liquid monomer solubility approach).

Effect of cyclodextrin concentration on the oral bioavailability of danazol and cinnarizine in rats.

Cyclodextrins (CDs) are frequently used as an excipient to enhance the intestinal drug absorption of compounds with a low aqueous solubility. However, there exists an intricate interplay between opposing effects that determine the optimal dosing criterion. These opposing effects are the benefits of circumventing the dissolution time required to dissolve the non-absorbable drug particles in the intestine versus the disadvantage of decreasing the concentration of the drug available to permeate the intestinal membrane if excessive CD concentrations are used.

Statistical Analysis of a Method to Predict Drug-Polymer Miscibility.

In this study, a method proposed to predict drug-polymer miscibility from differential scanning calorimetry measurements was subjected to statistical analysis. The method is relatively fast and inexpensive and has gained popularity as a result of the increasing interest in the formulation of drugs as amorphous solid dispersions. However, it does not include a standard statistical assessment of the experimental uncertainty by means of a confidence interval.

Displacement of Drugs From Cyclodextrin Complexes by Bile Salts: A Suggestion of an Intestinal Drug-Solubilizing Capacity From an In Vitro Model.

The dosing of drugs in an aqueous cyclodextrin formulation requires sufficient amount of cyclodextrins to fully solubilize the drug, as described by Stella's cyclodextrin utility number (UCD). However, this framework does not take biopharmaceutical elements into account, such as the displacement of drug from the cyclodextrin cavity by bile salts present in the small intestine. As bile salts in the intestine are present at concentrations above the critical micelle concentration, an understanding of the interaction between cyclodextrins and bile salts at such supramicellar concentrations (SMC) is required for a better biopharmaceutical understanding of the release mechanism from orally dosed cyclodextrin complexes.

Thermodynamic investigation of the interaction between cyclodextrins and preservatives - Application and verification in a mathematical model to determine the needed preservative surplus in aqueous cyclodextrin formulations.

Preservatives are inactivated when added to conserve aqueous cyclodextrin (CD) formulations due to complex formation between CDs and the preservative. To maintain the desired conservation effect the preservative needs to be added in apparent surplus to account for this inactivation. The purpose of the present work was to establish a mathematical model, which defines this surplus based upon knowledge of stability constants and the minimal concentration of preservation to inhibit bacterial growth.

Comparative Study of Different Methods for the Prediction of Drug-Polymer Solubility.

In this study, a comparison of different methods to predict drug-polymer solubility was carried out on binary systems consisting of five model drugs (paracetamol, chloramphenicol, celecoxib, indomethacin, and felodipine) and polyvinylpyrrolidone/vinyl acetate copolymers (PVP/VA) of different monomer weight ratios. The drug-polymer solubility at 25 °C was predicted using the Flory-Huggins model, from data obtained at elevated temperature using thermal analysis methods based on the recrystallization of a supersaturated amorphous solid dispersion and two variations of the melting point depression method. These predictions were compared with the solubility in the low molecular weight liquid analogues of the PVP/VA copolymer (N-vinylpyrrolidone and vinyl acetate).

Determination of thermodynamic potentials and the aggregation number for micelles with the mass-action model by isothermal titration calorimetry: A case study on bile salts.

The aggregation number (n), thermodynamic potentials (ΔG, ΔH, ΔS) and critical micelle concentration (CMC) for 6 natural bile salts were determined on the basis of both original and previously published isothermal titration calorimetry (ITC) data. Different procedures to estimate parameters of micelles with ITC were compared to a mass-action model (MAM) of reaction type: n⋅S⇌Mn. This analysis can provide guidelines for future ITC studies of systems behaving in accordance with this model such as micelles and proteins that undergo self-association to oligomers.

Influence of Polymer Molecular Weight on Drug-Polymer Solubility: A Comparison between Experimentally Determined Solubility in PVP and Prediction Derived from Solubility in Monomer.

In this study, the influence of polymer molecular weight on drug-polymer solubility was investigated using binary systems containing indomethacin (IMC) and polyvinylpyrrolidone (PVP) of different molecular weights. The experimental solubility in PVP, measured using a differential scanning calorimetry annealing method, was compared with the solubility calculated from the solubility of the drug in the liquid analogue N-vinylpyrrolidone (NVP). The experimental solubility of IMC in the low-molecular-weight PVP K12 was not significantly different from that in the higher molecular weight PVPs (K25, K30, and K90).

Evaluation of drug-polymer solubility curves through formal statistical analysis: comparison of preparation techniques.

In this study, the influence of the preparation technique (ball milling, spray drying, and film casting) of a supersaturated amorphous dispersion on the quality of solubility determinations of indomethacin in polyvinylpyrrolidone was investigated by means of statistical analysis. After annealing of the amorphous dispersions above the crystallization temperature for 2 h, the solubility curve was derived from the glass transition temperature of the demixed material using the Gordon-Taylor relationship and fitting with the Flory-Huggins model. The study showed that the predicted solubility from the ball-milled mixtures was not consistent with those from spray drying and film casting, indicating fundamental differences between the preparation techniques.

Estimation of the effective intercellular diffusion coefficient in cell monolayers coupled by gap junctions.

Objective: A recently developed dye-based assay to study gap junction permeability is analysed. The assay is based on electroporation of dye into a large number of connexin 43 expressing cells, grown to confluency on electrically conductive slides. The subsequent intercellular spread of dye to non-electroporated parts of the monolayer enables estimation of the intercellular coupling.