Sediment-bound trace metals in Golfe-Juan Bay, northwestern Mediterranean: Distribution, availability and toxicity.

The concentration, potential mobility, cation exchange capacity and toxicity of eight sediment-bound metals in Golfe-Juan Bay, France were examined. Results revealed significant spatial gradient of metal contamination along Golfe-Juan coast. The distribution and concentration of the metals appear to be influenced by the geochemical properties of the sediment, proximity to anthropogenic sources and general water circulation in the bay.

Use of neutralized industrial residue to stabilize trace elements (Cu, Cd, Zn, As, Mo, and Cr) in marine dredged sediment from South-East of France.

Management of marine dredged sediments polluted with trace elements is prime issue in the French Mediterranean coast. The polluted sediments possess ecological threats to surrounding environment on land disposal. Therefore, stabilization of contaminants in multi-contaminated marine dredged sediment is a promising technique.

Ex-situ evaluation of bauxite residues as amendment for trace elements stabilization in dredged sediment from Mediterranean Sea: A case study.

Stabilization of marine dredged sediments contaminated with multi-elements is a challenging task in choosing the appropriate sorbent and application dosage. The present study investigates the possibility of using bauxite residues (Bauxaline® and Bauxsol) as amendment for the treatment of contaminated sediment. A pilot scale experiment was conducted for three months to stabilize trace elements in composted contaminated sediment sample using 5% by-product amendment.

Direct injection method for HPLC/MS/MS analysis of acrylamide in aqueous solutions: application to adsorption experiments.

Polyacrylamides are polymers used in many fields and represent the main source of release of the highly toxic acrylamide in the environment. In this work, a simple, rapid, and sensitive analytical method was developed with HPLC/MS/MS and direct injection for acrylamide analysis in water and adsorption samples. AFNOR standards NF T90-210 and NF T90-220 were used for the analytical method validation and uncertainty estimation.

Comparison of mineral-based amendments for ex-situ stabilization of trace elements (As, Cd, Cu, Mo, Ni, Zn) in marine dredged sediments: a pilot-scale experiment.

Trace element pollution of marine dredged sediments is an emerging problem all over the world. Comparing to other wastes, trace elements stabilization is more difficult both due to the wide range of contaminants present in the marine sediments and their inherent physicochemical properties. In this study, a pilot-scale experiment was performed to stabilize As, Cd, Cu, Mo, Ni, and Zn in a multi-contaminated sediment sample using hematite, zero-valent iron and zeolite.

Toxicity assessment of silica nanoparticles, functionalised silica nanoparticles, and HASE-grafted silica nanoparticles.

Numerous nanomaterials have recently been developed, and numerous practical applications have been found in water treatment, medicine, cosmetics, and engineering. Associative polymers, such as hydrophobically modified alkali-soluble emulsion (HASE) systems are involved in several applications and have been extensively studied due to their ability to form three-dimensional networked gels. However, the data on the potential environmental effects of this polymers are scarce.

Batch and column studies of the stabilization of toxic heavy metals in dredged marine sediments by hematite after bioremediation.

The management of dredged sediments is an important issue in coastal regions where the marine sediments are highly polluted by metals and organic pollutants. In this paper, mineral-based amendments (hematite, zero-valent iron and zeolite) were used to stabilize metallic pollutants (As, Cd, Cu, Mo, Ni, Pb, and Zn) in a contaminated marine sediment sample. Mineral-based amendments were tested at three application rates (5 %, 10 %, and 15 %) in batch experiments in order to select the best amendment to perform column experiments.

Arsenic in marine sediments from French Mediterranean ports: geochemical partitioning, bioavailability and ecotoxicology.

This work investigates arsenic mobility, bioavailability and toxicity in marine port sediments using chemical sequential extraction and laboratory toxicity tests. Sediment samples were collected from two different Mediterranean ports, one highly polluted with arsenic and other inorganic and organic pollutants (Estaque port (EST)), and the other one, less polluted, with a low arsenic content (Saint Mandrier port (SM)). Arsenic distribution in the solid phase was studied using a sequential extraction procedure specifically developed for appraising arsenic mobility in sediments.

Toxicity of TiO(2) nanoparticles to cladocerans, algae, rotifers and plants - effects of size and crystalline structure.

With the rapid development of nanotechnology, there is an increasing risk of human and environmental exposure to nanotechnology-based materials. However, the data on the potential environmental effects of nanoparticles are scarce. The aim of this study is to assess the effect of particle size and crystal structure (anatase and rutile) of titanium dioxide on their toxicity.

Effect of temperature on the sorption of europium on alumina: microcalorimetry and batch experiments.

The determination of enthalpies of reactions (aqueous and surface complexation) is used in this work to model the temperature effect on the adsorption processes. Microcalorimetry experiments were carried out to determine the enthalpy of adsorption of europium on γ-alumina at 25 °C. The stability constants at 50 °C were then calculated with the van't Hoff equation, and a 2-pK approach was used to model the adsorptive behavior of Eu on alumina at 50 °C, as a function of pH.

Ex situ remediation of contaminated sediments using mineral additives: assessment of pollutant bioavailability with the Microtox solid phase test.

The aim of this work is to assess the potential ecotoxicological effects of contaminated sediments treated with mineral additives. The Microtox solid phase test was used to evaluate the effect of mineral additives on the toxicity of sediment suspensions. Four Mediterranean port sediments were studied after dredging and bioremediation: Sample A from navy harbor, sample B from commercial port and samples C and D from pleasure ports.

Influence of uranium on bacterial communities: a comparison of natural uranium-rich soils with controls.

This study investigated the influence of uranium on the indigenous bacterial community structure in natural soils with high uranium content. Radioactive soil samples exhibiting 0.26% - 25.

The toxicity of composted sediments from Mediterranean ports evaluated by several bioassays.

This work investigates the ecotoxicological evaluation of contaminated dredged sediments from French Mediterranean navy harbour (A), commercial port (B) and two composite specimens (C) and (D) coming from the mixture of A and B with other port sediments. The toxicity of elutriates from these sediments is estimated using embryo-toxicity test, Microtox® solid phase test, LuminoTox, phytotoxicity tests and genotoxicity test. Bioassay responses are not clearly correlated with chemical contamination in the whole sediment and vary as a function of tested organisms.

Ecotoxicological evaluation of Mediterranean dredged sediment ports based on elutriates with oyster embryotoxicity tests after composting process.

The ecotoxicological effect of dredged sediments was estimated by embryo-larval toxicity of the oyster Crassosstrea gigas in sediment elutriates (filtered and unfiltered). The study covers the main ports from the French Mediterranean coast. Composted sediments from a navy harbour (A), a commercial port (B) and two composite specimens (C and D) obtained after mixing various sediments were taken into consideration.

Sorption of Cr(VI) onto natural iron and aluminum (oxy)hydroxides: effects of pH, ionic strength and initial concentration.

The aim of this work is to study the performances of removal of hexavalent chromium from aqueous solution by three different oxy-hydroxides: hematite, goethite and alpha-alumina. Batch experiments were conducted to measure the effects on adsorption of Cr(VI) of different parameters such as pH of the medium, ionic strength, and initial concentration. Results showed that the adsorption of Cr(VI) depends strongly on the pH, but is independent of ionic strength for hematite and goethite.

Acid-base properties of the alumina surface: influence of the titration procedures on the microcalorimetric results.

The enthalpy changes associated with the protonation and deprotonation of an alumina surface have been determined on the basis of microcalorimetry experiments and acid-base potentiometric titrations at 25 degrees C. It has been shown that the results may vary significantly according to the experimental procedure. In order to do so, the potentiometric and microcalorimetric titrations have been carried out first from an acidic pH to basic pH and second from a pH near the pH(zpc) of alumina to acidic or basic pH.

Competition between selenium (IV) and silicic acid on the hematite surface.

Competition between selenium (IV) and silicic acid for the hematite (alpha-Fe(2)O(3)) surface has been studied during this work. Single batch experiments have been performed to study separately the sorption of selenium (IV) and silicic acid as a function of the pH. With the help of the 2-pK surface complexation model, experimental data have been fitted using the FITEQL 4.

Sorption of selenium(IV) onto magnetite in the presence of silicic acid.

Sorption of selenium(IV) and silicic acid onto magnetite (Fe(3)O(4)) was investigated in binary systems, with concentrations of silicic acid under the solubility limit of amorphous silica. Using the double diffuse layer model (DDLM), surface complexation constants of selenium(IV) and H(4)SiO(4) onto magnetite were extracted using Fiteql 4.0.

Sorption of silicates on goethite, hematite, and magnetite: experiments and modelling.

Sorption of H(4)SiO(4) (including experiments as a function of time, K(d) measurement with different m/v ratios and sorption edges) onto different iron (hydro)oxides as goethite (alpha-FeOOH), hematite (alpha-Fe(2)O(3)), and magnetite (Fe(3)O(4)) has been studied with concentration of silicates under solubility limit. A surface complexation model has been used to account for sorption edge of silicates onto these iron oxide surfaces. It reveals that two types of surface complex namely FeH(3)SiO(4) and FeH(2)SiO(4)(-), are needed to describe properly the experimental observations.

Effect of temperature on the acid-base properties of the alumina surface: microcalorimetry and acid-base titration experiments.

Sorption reactions on natural or synthetic materials that can attenuate the migration of pollutants in the geosphere could be affected by temperature variations. Nevertheless, most of the theoretical models describing sorption reactions are at 25 degrees C. To check these models at different temperatures, experimental data such as the enthalpies of sorption are thus required.

Sorption Mechanisms of Eu(3+) on CSH Phases of Hydrated Cements.

The sorption mechanisms of Eu(3+) on calcium silicate hydrate (CSH) phases of hydrated cement were investigated as a tool for the prediction of the behavior of trivalent radionuclides with aged/degraded cements in radioactive waste repositories. Four techniques were used: site-selective and time-resolved luminescence spectroscopy, XPS, high-resolution SEM coupled with EDX, and XRD. Results showed that europium is not precipitated in the solution despite its low solubility limit.

Using CCM for the Prediction of Sorption Curves under Varying Ionic Strength Conditions: Reply to Some Comments.

In response to the comments of J. Lützenkirchen (237, 297 (2001), J. Colloid Interface Science), it is pointed out that the criticized model is not intended to provide a complete description of the system studied (Cs on silica-magnetite).