Soft Metalens for Broadband Ultrasonic Focusing through Aberration Layers.

Aberration layers (AL) often present significant energy transmission barriers in microwave engineering, electromagnetic waves, and medical ultrasound. However, achieving broadband ultrasonic focusing through aberration layers like the human skull using conventional materials such as metals and elastomers has proven challenging. In this study, we introduce an inverse phase encoding method employing tunable soft metalens to penetrate heterogeneous aberration layers.

Scalable Multistep Roll-to-Roll Printing of Multifunctional and Robust Reentrant Microcavity Surfaces via a Wetting-Induced Process.

Owing to their unique structural robustness, interconnected reentrant structures offer multifunctionality for various applications. a scalable multistep roll-to-roll printing method is proposed for fabricating reentrant microcavity surfaces, coined as wetting-induced interconnected reentrant geometry (WING) process. The key to the proposed WING process is a highly reproducible reentrant structure formation controlled by the capillary action during contact between prefabricated microcavity structure and spray-coated ultraviolet-curable resins.

Ultra-broadband illusion acoustics for space and time camouflages.

Invisibility cloaks that can suppress wave scattering by objects have attracted a tremendous amount of interest in the past two decades. In comparison to prior methods that were severely limited by narrow bandwidths, here we present a practical strategy to suppress sound scattering across an ultra-broad spectrum by leveraging illusion metamaterials. Consisting of a collection of subwavelength tunnels with precisely crafted internal structures, this illusion metamaterial has the ability to guide acoustic waves around the obstacles and accurately recreate the incoming wavefront on the exit surface.

Data-driven inverse design of flexible pressure sensors.

Artificial skins or flexible pressure sensors that mimic human cutaneous mechanoreceptors transduce tactile stimuli to quantitative electrical signals. Conventional trial-and-error designs for such devices follow a forward structure-to-property routine, which is usually time-consuming and determines one possible solution in one run. Data-driven inverse design can precisely target desired functions while showing far higher productivity, however, it is still absent for flexible pressure sensors because of the difficulties in acquiring a large amount of data.

Matte surfaces with broadband transparency enabled by highly asymmetric diffusion of white light.

The long-standing paradox between matte appearance and transparency has deprived traditional matte materials of optical transparency. Here, we present a solution to this centuries-old optical conundrum by harnessing the potential of disordered optical metasurfaces. Through the construction of a random array of meta-atoms tailored in asymmetric backgrounds, we have created transparent matte surfaces that maintain clear transparency regardless of the strength of disordered light scattering or their matte appearances.

Artificial axons as a biomimetic 3D myelination platform for the discovery and validation of promyelinating compounds.

Multiple sclerosis (MS), a chronic neurodegenerative disease driven by damage to the protective myelin sheath, is currently incurable. Today, all clinically available treatments modulate the immune-mediated symptoms of the disease but they fail to stop neurodegeneration in many patients. Remyelination, the regenerative process of myelin repair by oligodendrocytes, which is considered a necessary step to protect demyelinated axons and stop neuronal death, is impaired in MS patients.

Achieving Fast Oxygen Reduction on Oxide Electrodes by Creating 3D Multiscale Micro-Nano Structures for Low-Temperature Solid Oxide Fuel Cells.

Fast oxygen reduction reaction (ORR) at the cathode is a key requirement for the realization of low-temperature solid oxide fuel cells (SOFCs). While the design of three-dimensional (3D) structures has emerged as a new and promising approach to improving the electrochemical performance of SOFC cathodes, achieving versatile structures and structural stability is still challenging. In this study, we demonstrate a novel architectural design for a superior cathode with fast ORR activity.

3D Printing of Interpenetrating Network Flexible Hydrogels with Enhancement of Adhesiveness.

3D printing of hydrogels has been widely explored for the rapid fabrication of complex soft structures and devices. However, using 3D printing to customize hydrogels with both adequate adhesiveness and toughness remains a fundamental challenge. Here, we demonstrate mussel-inspired (polydopamine) PDA hydrogel through the incorporation of a classical double network (2-acrylamido-2-methylpropanesulfonic acid) PAMPS/(polyacrylamide) PAAm to achieve simultaneously tailored adhesiveness, toughness, and biocompatibility and validate the 3D printability of such a hydrogel into customized architectures.

Self-regulated underwater phototaxis of a photoresponsive hydrogel-based phototactic vehicle.

Incorporating a negative feedback loop in a synthetic material to enable complex self-regulative behaviours akin to living organisms remains a design challenge. Here we show that a hydrogel-based vehicle can follow the directions of photonic illumination with directional regulation inside a constraint-free, fluidic space. By manipulating the customized photothermal nanoparticles and the microscale pores in the polymeric matrix, we achieved strong chemomechanical deformation of the soft material.

Underwater acoustic metamaterials.

Acoustic metamaterials have been widely investigated over the past few decades and have realized acoustic parameters that are not achievable using conventional materials. After demonstrating that locally resonant acoustic metamaterials are capable of acting as subwavelength unit cells, researchers have evaluated the possibility of breaking the classical limitations of the material mass density and bulk modulus. Combined with theoretical analysis, additive manufacturing and engineering applications, acoustic metamaterials have demonstrated extraordinary capabilities, including negative refraction, cloaking, beam formation and super-resolution imaging.

Quasi-seamless stitching for large-area micropatterned surfaces enabled by Fourier spectral analysis of moiré patterns.

The main challenge in preparing a flexible mold stamp using roll-to-roll nanoimprint lithography is to simultaneously increase the imprintable area with a minimized perceptible seam. However, the current methods for stitching multiple small molds to fabricate large-area molds and functional surfaces typically rely on the alignment mark, which inevitably produces a clear alignment mark and stitched seam. In this study, we propose a mark-less alignment by the pattern itself method inspired by moiré technique, which uses the Fourier spectral analysis of moiré patterns formed by superposed identical patterns for alignment.

Wide-Field Visualization of Palladium Hydrogenation.

Visualizing hydrogenation processes in palladium (Pd) in real-time is important to various hydrogen-involved applications. However, observing hydrogen diffusion of Pd was limited by its small permittivity variation, and the kinetics of lateral diffusion of hydrogen in Pd film was not reported. Here, we proposed an optical microscopy-based visualization of Pd hydrogenation from the diffusion surface to the interior by introducing a fast-response mechanical platform that transforms the hydrogen diffusion into self-organized ordered wrinkles with sharp optical contrast.

Biomimetic on-chip filtration enabled by direct micro-3D printing on membrane.

Membrane-on-chip is of growing interest in a wide variety of high-throughput environmental and water research. Advances in membrane technology continuously provide novel materials and multi-functional structures. Yet, the incorporation of membrane into microfluidic devices remains challenging, thus limiting its versatile utilization.

3D direct printing of mechanical and biocompatible hydrogel meta-structures.

Direct Ink Writing (DIW) has demonstrated great potential as a versatile method to 3D print multifunctional structures. In this work, we report the implementation of hydrogel meta-structures using DIW at room temperature, which seamlessly integrate large specific surface areas, interconnected porous characteristics, mechanical toughness, biocompatibility, and water absorption and retention capabilities. Robust but hydrophobic polymers and weakly crosslinked nature-origin hydrogels form a balance in the self-supporting ink, allowing us to directly print complex meta-structures without sacrificial materials and heating extrusion.

Muscle-fiber array inspired, multiple-mode, pneumatic artificial muscles through planar design and one-step rolling fabrication.

Advances in development of artificial muscles have enabled creation of soft robots with biological dexterity and self-adaption in unstructured environments; however, production of scalable artificial muscles with multiple-mode actuations remains elusive. Inspired by muscle-fiber arrays in muscular hydrostats, we present a class of versatile artificial muscles called MAIPAMs (muscle-fiber array inspired pneumatic artificial muscles), capable of multiple-mode actuations (such as parallel elongation-bending-spiraling actuations, 10 parallel bending actuations and cascaded elongation-bending-spiraling actuations). Our MAIPAMs consist of active 3D elastomer-balloon arrays reinforced by a passive elastomer membrane, achieved through a planar design and one-step rolling fabrication approach.

Scalable 3D printing of aperiodic cellular structures by rotational stacking of integral image formation.

The limitation of projection microstereolithography in additive manufacturing methods is that they typically use a single-aperture imaging configuration, which restricts their ability to produce microstructures in large volumes owing to the trade-off between image resolution and image field area. Here, we propose an integral lithography based on integral image reconstruction coupled with a planar lens array. The individual microlenses maintain a high numerical aperture and are used to create digital light patterns that can expand the printable area by the number of microlenses (10 to 10), thereby allowing for the scalable stereolithographic fabrication of 3D features that surpass the resolution-to-area scaling limit.

High resolution stereolithography fabrication of perfusable scaffolds to enable long-term meso-scale hepatic culture for disease modeling.

Microphysiological systems (MPS), comprising human cell cultured in formats that capture features of the three-dimensional (3D) microenvironments of native human organs under microperfusion, are promising tools for biomedical research. Here we report the development of a mesoscale physiological system (MePS) enabling the long-term 3D perfused culture of primary human hepatocytes at scales of over 10cells per MPS. A central feature of the MePS, which employs a commercially-available multiwell bioreactor for perfusion, is a novel scaffold comprising a dense network of nano- and micro-porous polymer channels, designed to provide appropriate convective and diffusive mass transfer of oxygen and other nutrients while maintaining physiological values of shear stress.

Three-Dimensional Soundproof Acoustic Metacage.

In this Letter, we theoretically propose and experimentally demonstrate a three-dimensional soundproof acoustic cage structure, hereby denoted as an acoustic metacage. The metacage is composed of six acoustic metamaterial slabs with open holes and hidden bypass space coiling tunnels connected to the holes. Band structure analysis reveals a novel physical mechanism to open a low-frequency broad partial band gap via the band folding in other directions, which can also be interpreted by an effective medium with indefinite effective mass density and negative effective modulus.

Skin-electrode iontronic interface for mechanosensing.

Electrodermal devices that capture the physiological response of skin are crucial for monitoring vital signals, but they often require convoluted layered designs with either electronic or ionic active materials relying on complicated synthesis procedures, encapsulation, and packaging techniques. Here, we report that the ionic transport in living systems can provide a simple mode of iontronic sensing and bypass the need of artificial ionic materials. A simple skin-electrode mechanosensing structure (SEMS) is constructed, exhibiting high pressure-resolution and spatial-resolution, being capable of feeling touch and detecting weak physiological signals such as fingertip pulse under different skin humidity.

Microstructured Surfaces for Reducing Chances of Fomite Transmission via Virus-Containing Respiratory Droplets.

Evaporation-induced particle aggregation in drying droplets is of significant importance in the prevention of pathogen transfer due to the possibility of indirect fomite transmission of the infectious virus particles. In this study, particle aggregation was directionally controlled using contact line dynamics (pinned or slipping) and geometrical gradients on microstructured surfaces by the systematic investigation of the evaporation process on sessile droplets and sprayed microdroplets laden with virus-simulant nanoparticles. Using this mechanism, we designed robust particle capture surfaces by significantly inhibiting the contact transfer of particles from fomite surfaces.

Shape-Deformed Mushroom-like Reentrant Structures for Robust Liquid-Repellent Surfaces.

Artificial liquid-repellent surfaces inspired by biomimetic structures provide a wide range of functional surfaces for various practical applications, such as self-cleaning, antisticking, oil/water separation, and droplet manipulation. However, functional biomimetic structures cannot be fabricated using conventional techniques. For example, mushroom-like topologies on the skin of springtails, which are referred to as "doubly reentrant structures," have attracted significant attention owing to their extraordinary liquid-repellent properties.

Recurrent neural network reveals transparent objects through scattering media.

Scattering generally worsens the condition of inverse problems, with the severity depending on the statistics of the refractive index gradient and contrast. Removing scattering artifacts from images has attracted much work in the literature, including recently the use of static neural networks. S.

Electromechanically reconfigurable optical nano-kirigami.

Kirigami, with facile and automated fashion of three-dimensional (3D) transformations, offers an unconventional approach for realizing cutting-edge optical nano-electromechanical systems. Here, we demonstrate an on-chip and electromechanically reconfigurable nano-kirigami with optical functionalities. The nano-electromechanical system is built on an Au/SiO/Si substrate and operated via attractive electrostatic forces between the top gold nanostructure and bottom silicon substrate.