Combining finite elements method electrodynamic simulations and cost-effective and scalable nanofabrication techniques, we carried out a systematic investigation and optimization of the sensing properties of non-interacting gold nanodisk arrays. Such plasmonic nanoarchitectures offer a very effective platform for fast and simple, label-free, optical bio- and chemical-sensing. We varied their main geometrical parameters (diameter and height) to monitor the plasmonic resonance position and to find the configurations that maximize the sensitivity to small layers of an analyte (local sensitivity) or to the variation of the refractive index of an embedding medium (bulk sensitivity).
View Article and Find Full Text PDFShaping ceramic materials at the nanoscale in 3D is a phenomenal engineering challenge, that can offer new opportunities in a number of industrial applications, including metamaterials, nano-electromechanical systems, photonic crystals, and damage-tolerant lightweight materials. 3D fabrication of sub-micrometer ceramic structures can be performed by two-photon laser writing of a preceramic polymer. However, polymer conversion to a fully ceramic material has proven so far unfeasible, due to lack of suitable precursors, printing complexity, and high shrinkage during ceramic conversion.
View Article and Find Full Text PDFImplantable devices need specific tailored surface morphologies and chemistries to interact with the living systems or to actively induce a biological response also by the release of drugs or proteins. These customized requirements foster technologies that can be implemented in additive manufacturing systems. Here, we present a novel approach based on spraying processes that allow to control separately topographic features in the submicron range (∼60 nm to 2 μm), ammine or carboxylic chemistry, and fluorophore release even on temperature-sensitive biodegradable polymers such as polycaprolactone (PCL).
View Article and Find Full Text PDFThe laser-induced plasmon heating of an ordered array of silver nanoparticles, under continuous illumination with an Ar laser, was probed by rare-earth fluorescence thermometry. The rise in temperature in the samples was monitored by measuring the temperature-sensitive photoluminescent emission of a europium complex (EuTTA) embedded in PMMA thin-films, deposited onto the nanoparticles array. A maximum temperature increase of 19 °C was determined upon resonant illumination with the surface plasmon resonance of the nanoarray at the highest pump Ar laser power (173 mW).
View Article and Find Full Text PDFIn this work we present the study of the ultra-fast dynamics of the nonlinear optical response of a honeycomb array of silver triangular nanoprisms, performed using a femtosecond pulsed laser tuned with the dipolar surface plasmon resonance of the nanoarray. Nonlinear absorption and refraction, and their time-dependence, were explored using the z-scan and time-resolved excite-probe techniques. Nonlinear absorption is shown to change sign with the input irradiance and the behavior was explained on the basis of a three-level model.
View Article and Find Full Text PDFOrdered metallic nanoprism arrays have been proposed as novel and versatile systems for the observation of nonlinear effects such as nonlinear absorption. The study of the effect of the local field reinforcement on the fast optical third order nonlinear response around the Surface Plasmon Resonance is of great interest for many plasmonic applications. In this work, silver nanoprism arrays have been synthesized by the nanosphere lithography method.
View Article and Find Full Text PDFNanosphere lithography coupled with reactive ion etching has been used to synthesize hexagonal ordered arrays of Au-Ag bimetallic semi-nanoshells to be used as plasmonic biosensors. The degree of lateral interaction between adjacent semi-nanoshells can be controlled by tailoring the reactive ion etching time in order to boost the global plasmonic properties through the formation of near-field hot-spots, which in turn can improve the sensitivity of the biosensors. To test the efficiency of the proposed system as a biosensor, we used an established protocol for the detection of biomolecules (local sensitivity), based on the receptor-ligand approach and using the biotin-streptavidin model system.
View Article and Find Full Text PDFACS Appl Mater Interfaces
November 2016
Highly doped wide band gap metal oxide nanocrystals have recently been proposed as building blocks for applications as transparent electrodes, electrochromics, plasmonics, and optoelectronics in general. Here we demonstrate the application of gallium-doped zinc oxide (GZO) nanocrystals as novel plasmonic and chemiresistive sensors for the detection of hazardous gases including hydrogen (H) and nitrogen dioxide (NO). GZO nanocrystals with a tunable surface plasmon resonance in the near-infrared are obtained using a colloidal heat-up synthesis.
View Article and Find Full Text PDFThe nonlinear absorption properties of bidimensional arrays of Au-Ag bilayered nanoprisms have been investigated by z-scan measurements as a function of the bimetallic nanoprism composition. A tunable ps laser system was used to excite the ultrafast, electronic nonlinear response matching the laser wavelength with the quadrupolar surface plasmon resonances, in the visible range, of each nanoprism array. Due to the strong electromagnetic field confinement effects at the nanoprism tips, demonstrated by finite element method simulations, these nanosystems proved to have enhanced nonlinear optical properties.
View Article and Find Full Text PDFThe very early steps of Au metal cluster formation in Er-doped silica have been investigated by high-energy resolution fluorescence-detected X-ray absorption spectroscopy (HERFD-XAS). A combined analysis of the near-edge and extended part of the experimental spectra shows that Au cluster nucleation starts from a few Au and O atoms covalently interconnected, likely in the presence of embryonic Au-Au correlation. The first Au clusters, characterized by a well defined Au-Au coordination distance, form upon 400 °C inert annealing.
View Article and Find Full Text PDFThe occurrence of a very efficient non-resonant energy transfer process forming ultrasmall Au-Ag nanoalloy clusters and Er(3+) ions is investigated in silica. The enhancement of the room temperature Er(3+) emission efficiency by an order of magnitude is achieved by coupling rare-earth ions to molecule-like (Au(x)Ag(1-x))N alloy nanoclusters with N = 10-15 atoms and x = 0.6 obtained by optimized sequential ion implantation on Er-implanted silica.
View Article and Find Full Text PDFPlasmonic sensors based on ordered arrays of nanoprisms are optimized in terms of their geometric parameters like size, height, aspect ratio for Au, Ag or Au0.5-Ag0.5 alloy to be used in the visible or near IR spectral range.
View Article and Find Full Text PDFSub-nanometric Au nanoclusters are known to act as very efficient sensitizers for the luminescent emission of Er(3+) ions in silica through a non-resonant broad-band energy-transfer mechanism. In the present work the energy-transfer process is investigated in detail by room temperature photoluminescence characterization of Er and Au co-implanted silica systems in which a different degree of coupling between Er(3+) ions and Au nanoclusters is obtained. The results allow us to definitely demonstrate the short-range nature of the interaction in agreement with non-radiative energy-transfer mechanisms.
View Article and Find Full Text PDFWe report the achievement of sensitive gas detection using periodic silver nanoprisms fabricated by a simple and low-cost lithographic technique. The presence of sharp tips combined with the periodic arrangement of the nanoprisms allowed the excitement of isolated and interacting localized surface plasmon resonances. Specific sensing capabilities with respect to aromatic hydrocarbons were achieved when the metal nanoprism arrays were coupled in the near field with functional hybrid films, providing a real-time, label-free, and reversible methodology.
View Article and Find Full Text PDF