Low-Platinum-Content Exchange-Coupled CoPt Nanoalloys with Enhanced Magnetic Properties.

Bimetallic colloidal CoPt nanoalloys with low platinum content were successfully synthesized following a modified polyol approach. Powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM) studies were performed to estimate the crystal structure, morphology, and surface functionalization of the colloids, respectively, while the room-temperature magnetic properties were measured using a vibrating sample magnetometer (VSM). The particles exhibit excellent uniformity, with a narrow size distribution, and display strong room-temperature hysteretic ferromagnetic behavior even in the as-made form.

L1-FeNi films on Au-Cu-Ni buffer-layer: a high-throughput combinatorial study.

The fct L1-FeNi alloy is a promising candidate for the development of high performance critical-elements-free magnetic materials. Among the different materials, the Au-Cu-Ni alloy has resulted very promising; however, a detailed investigation of the effect of the buffer-layer composition on the formation of the hard FeNi phase is still missing. To accelerate the search of the best Au-Cu-Ni composition, a combinatorial approach based on High-Throughput (HT) experimental methods has been exploited in this paper.

Investigation of split CoFeB/Ta/CoFeB/MgO stacks for magnetic memories applications.

We report on the static and dynamic magnetic properties of W/CoFeB/Ta/CoFeB/MgO stacks, where the CoFeB layer is split in two by a 0.3 nm-thick Ta "dusting" layer. A total CoFeB thickness between 1.

Nanometer Scale Hard/Soft Bilayer Magnetic Antidots.

The effect of arrays of nanometer scale pores on the magnetic properties of thin films has been analyzed. Particularly, we investigated the influence of the out-of-plane magnetization component created by the nanopores on the in-plane magnetic behavior of patterned hard/soft magnetic thin films in antidot morphology. Its influence on the coupling in Co/Py bilayers of few tens of nanometer thick is compared for disordered and ordered antidots of 35-nm diameter.

One pot synthesis and characterization of ultra fine CeO2 and Cu/CeO2 nanoparticles. Application for low temperature CO oxidation.

Ultra fine cerium oxide and copper doped cerium oxide nanoparticles are prepared in a one-step reaction by thermal decomposition of Ce acetate in commercial oleylamine. The products are highly crystalline and were characterized by XRD, Raman spectroscopy, XPS, TEM and BET. The TEM images show that the CeO2 particles prepared are uniformly nanosized.

On the biocompatibility of Fe3O4 ferromagnetic nanoparticles with human blood cells.

Magnetic particles are currently applied to special biomedical and environmental applications owing to their unique magnetic, morphological and substance-carrying capabilities. Very recently we introduced Magnetically Assisted Hemodialysis (MAHD), an innovative therapeutic application of Ferromagnetic Nanoparticles (FNs) for the treatment of End-Stage Renal Disease (ESRD). MAHD can be employed for the selective and efficient removal of toxins that, although of high biological importance, they cannot be handled by current Hemodialysis strategies.

Immobilization of magnetic iron oxide nanoparticles on laponite discs - an easy way to biocompatible ferrofluids and ferrogels.

Magnetic nanocomposites containing iron oxide (maghemite) nanoparticles, well embedded in a synthetic clay matrix (laponite) were prepared by a new one step chemical route and characterized by TEM, XRD, magnetization measurements, Mössbauer spectroscopy, DLS, and MRI measurements. The synthetic procedure leads to non-stoichiometric γ-Fe(2)O(3) with a controllable content in the nanocomposite. Magnetic nanoparticles incorporated in the diamagnetic clay matrix exhibit a mean diameter of 13 nm, superparamagnetic behavior with a high saturation magnetization achievable at low applied magnetic fields.

Bare and protein-conjugated Fe(3)O(4) ferromagnetic nanoparticles for utilization in magnetically assisted hemodialysis: biocompatibility with human blood cells.

Magnetically assisted hemodialysis is a development of conventional hemodialysis and is based on the circulation of ferromagnetic nanoparticle-targeted binding substance conjugates (FN-TBS Cs) in the bloodstream of the patient and their eventual removal by means of a 'magnetic dialyzer'. Presented here is an in vitro investigation on the biocompatibility of bare Fe(3)O(4) FNs and Fe(3)O(4)-bovine serum albumin Cs with blood cells, namely red blood cells (RBCs), white blood cells (WBCs) and platelets (Plts). Atomic force microscopy (AFM) and optical microscopy (OM) enabled the examination of blood cells at the nanometer and micrometer level, respectively.

Synthesis and magnetic properties of Fe3O4 nanoparticles coated with biocompatible double hydrophilic block copolymer.

Fe3O4 nanoparticles coated with double hydrophilic biocompatible poly(sodium(2-sulfamate-3-carboxylate)isoprene)-b-poly(ethylene oxide) block copolymer were prepared by a one step precipitation method. The magnetic nanoparticles have 15 nm mean diameter (TEM), 68 nm hydrodynamic diameter, -30.10 mV zeta-potential and form very stable dispersion in aqueous media.

Dye-sensitization of self-assembled titania nanotubes prepared by galvanostatic anodization of Ti sputtered on conductive glass.

Self-organized porous TiO(2) nanotubes (NTs) were prepared on conductive glass by galvanostatic anodizing of sputtered titanium in an NH(4)F /glycerol electrolyte. DC magnetron sputtering at an elevated substrate temperature (500 degrees C) was used to deposit 650 nm thick titanium films. After anodizing, NTs, 830 nm long, with an average external diameter of 92 nm, were grown; this gave a high conversion rate of oxide from titanium (1.

Silver nanoparticles and graphitic carbon through thermal decomposition of a silver/acetylenedicarboxylic salt.

Spherically shaped silver nanoparticles embedded in a carbon matrix were synthesized by thermal decomposition of a Ag(I)/acetylenedicarboxylic acid salt. The silver nanoparticles, which are formed either by pyrolysis at 300 degrees C in an autoclave or thermolysis in xylene suspension at reflux temperature, are acting catalytically for the formation of graphite layers. Both reactions proceed through in situ reduction of the silver cations and polymerization of the central acetylene triple bonds and the exact temperature of the reaction can be monitored through DTA analysis.

A general chemical route for the synthesis of capped nanocrystalline materials.

Noble metals, magnetic and semiconducting nanocrystalline materials have been synthesized via the thermolytic decomposition of inorganic metal salts, at high temperature, in commercial oleyl amine. The oleyl amine acts as high boiling point coordinating solvent, capping agent and, when required, as reducing agent. The crystal structure and morphology of the nanostructured materials have been studied with powder X-ray analysis (XRD) and transmission electron microscopy (TEM).

Engineering of FePt nanoparticles by e-beam co-evaporation.

Fe(50)Pt(50) nanoparticles were deposited on thermally oxidized Si substrates by electron-beam co-evaporation of Fe and Pt, at substrate temperatures T(s) between 300 and 700 degrees C. The co-deposition led to the formation of drop-like, coalesced nanoparticles, chain-like structures or continuous films, the morphology being dependent on T(s) or the nominal thickness of the layer, f. The nanoparticles have a mean diameter D(p) between 3 and 45 nm, which increases with increasing f.

FePt and CoPt nanoparticles co-deposited on silicon dioxide-a comparative study.

We compare CoPt and FePt nanoparticles grown under identical conditions on oxidized Si substrates by electron beam co-evaporation. Growth was performed under high vacuum conditions at substrate temperatures of 1023 K and was immediately followed by an annealing step. This process forms CoPt and FePt nanoparticles with mean diameters between ∼17 and ∼22 nm.

Large-scale synthesis, size control, and anisotropic growth of gamma-Fe2O3 nanoparticles: organosols and hydrosols.

Monodispersed, spherical gamma-Fe2O3 nanoparticles with controllable size in large-scale were prepared by thermolytic decomposition of FeCl3.6H2O in aliphatic amines. The nanoparticles gave very stable colloidal solution in organic solvents and can be easily converted to water-soluble by a very simple route.

Synthesis and characterization of monodispersed rhodium nanoparticles organized in 3-D symmetrical structures soluble in organic media.

Monodispersed rhodium nanoparticles were synthesized through a flexible and very simple approach in a monosurfactant system by thermolysis of RhCl3, in which oleyl amine serves as capping, reducing agent, and high boiled solvent. The coated rhodium nanoparticles are monodispersed with 4 nm diameter and well characterised by TEM microscopy, UV-Vis spectroscopy, and X-ray diffraction measurements. The as prepared rhodium nanoparticles have the tendency to aggregate forming well-organized large symmetrical and spherical 3-D superstructures which generally have diameters between 40-60 nm as revealed by the characteristic TEM images.

The effect of Mn doping in FePt nanoparticles on the magnetic properties of the L1(0) phase.

FePtMn nanoparticles with a narrow size distribution and an average diameter of 3 nm were synthesized by the chemical reduction of Fe(acac)(3) and Pt(acac)(2) by NaBH(4) and the thermal decomposition of Mn(2)(CO)(10) in phenyl ether. The as-made nanoparticles have a disordered face-centred cubic (fcc) structure, which transformed after thermal treatment at 650 °C to an ordered face-centred tetragonal (fct) structure, possessing coercivity values up to 13.7 kOe at room temperature.

Characterization of a novel cell penetrating peptide derived from Bag-1 protein.

A highly cationic peptide (BagP), located within the normally expressed human protein Bag-1, was tested for its capacity to act as a cell penetrating peptide. BagP was found to translocate and transport high molecular weight cargos in several cell types, in varying degrees with a preference for adherent cells. The penetration phenomenon was not found to be subject to saturation for the highest amount of peptide tested (100 microM), whereas the time needed for maximum translocation to be achieved, was cell type-dependent.

Effective negative refractive index in ferromagnet-semiconductor superlattices.

Problem of anomalous refraction of electromagnetic waves is analyzed in a superlattice which consists of alternating layers of ferromagnetic insulator and nonmagnetic semiconductor. Effective permittivity and permeability tensors are derived in the presence of an external magnetic field parallel to the plane of the layers. It is shown that in the case of the Voigt configuration, the structure behaves as a left-handed medium with respect to TE-type polarized wave, in the low-frequency region of propagation.

Effect of IL-21 on NK cells derived from different umbilical cord blood populations.

IL-21 plays a role in the proliferation and maturation of NK cells developed from hematopoietic stem cells. In this study, we found that IL-21, in the presence of physiological concentration of hydrocortisone (HC), has a significant impact on the functions of NK cells derived from umbilical cord blood (CB) populations. We demonstrate that IL-21, in combination with Flt3-ligand, IL-15 and HC, induces high proliferative responses and, apart from enhancing NK-mediated cytotoxicity, it also induces a significant increase in lymphokine-activated killer activity of CB/CD34+-derived CD56+ cells.

Synthesis and characterization of 3D CoPt nanostructures.

Cobalt platinum polypod-like nanostructures were synthesized by thermolytic reduction of Pt(acac)2 and Co(CH3COO)2 in oleylamine at 250 degrees C. The as-made CoPt nanopolypods are ferromagnetic, are soluble in nonpolar organic solvents, and reveal a coercive field of 525 and 1200 Oe at room temperature and 5 K, respectively.

Synthesis of CoPt nanoparticles by a modified polyol method: characterization and magnetic properties.

CoPt nanoparticles with an average size of 3 nm and narrow distribution were synthesized by chemical reduction of Co(CH(3)COO)(2) and Pt(acac)(2) by polyethyleneglycol-200. The as-prepared nanoparticles have a disordered fcc structure which transformed after thermal treatment to an ordered fct structure, which results in coercivity up to 6 kOe at room temperature and 9 kOe at 5 K because of the high magnetocrystalline anisotropy of the tetragonal structure [Formula: see text].

A novel myeloid-like NK cell progenitor in human umbilical cord blood.

Natural killer (NK) cell differentiation from pluripotent CD34(+) human hematopoietic stem cells or oligopotent lymphoid progenitors has already been reported. In the present study, long-term cultures of the CD56(-)/CD34(-) myeloid-like adherent cell fraction (ACF) from umbilical cord blood (UCB), characterized by the expression of CD14(+) as well as other myeloid markers, were set up with flt3 ligand (FL) and interleukin-15 (IL-15). The UCB/ACF gradually expressed the CD56 marker, which reached fairly high levels (approximately 90% of the cells were CD56(+)) by day 15.

55Mn NMR investigation of electronic phase separation in La1-xCaxMnO3 for 0.2 < or = x < or = 0.5.

55Mn NMR line shape measurements in La1-xCaxMnO3 for 0.20< or =x< or =0.50 provide experimental evidence about the existence of two distinct regions in the T-x magnetic phase diagram, where the homogeneous ferromagnetic (FM) metallic state is separated into FM metallic and FM insulating regions.

Layer-resolved magnetic moments in Ni/Pt multilayers.

The magnetic moments in Ni/Pt multilayers are thoroughly studied by combining experimental and ab initio theoretical techniques. SQUID magnetometry probes the samples' magnetizations. X-ray magnetic circular dichroism separates the contribution of Ni and Pt and provides a layer-resolved magnetic moment profile for the whole system.