Efficacy of High Flow Nasal Cannula in the Treatment of Patients with COVID-19 with Acute Respiratory Distress Syndrome: Results of Single Centre Study in Vietnam.

Introduction: Most hospitalized patients required invasive or non-invasive ventilation and High Flow Nasal Cannula (HFNC). Therefore, this study was conducted to describe the characteristics of patients with severe Coronavirus Disease-2019 (COVID-19) treated by HFNC and its effectiveness for reducing the rate of intubated-mechanical ventilation in the Intensive Care Unit (ICU) of Phu Chanh COVID-19 Department-Binh Duong General Hospital.

Methods: It was a cross-sectional and descriptive study.

Genotype by environment interaction across water regimes in relation to cropping season response of quinoa (Chenopodium quinoa).

Genotype × environment (GxE) interaction effects are one of the major challenges in identifying cultivars with stable performance across agri-environments. In this study we analysed GE interactions to identify quinoa (Chenopodium quinoa) cultivars with high and stable yields under different soil moisture regimes, representing control conditions, waterlogging and drought. Waterlogging and drought treatments were artificially induced using normoxia, a combination of hypoxia-normoxia, and 10% PEG (Polyethylene glycol) under hydroponic growth conditions, respectively.

Correction: Shape-controlled synthesis of micro-/nanosized Cu particles with spherical and polyhedral shapes using the polyol process.

[This corrects the article DOI: 10.1039/D4RA03643C.].

Shape-controlled synthesis of micro-/nanosized Cu particles with spherical and polyhedral shapes using the polyol process.

This study reports the synthesis of Cu micro-/nanosized particles through the polyol process. Cu particles were synthesized by reducing copper(ii) chloride in ethylene glycol (EG), polyvinylpyrrolidone (PVP), and potassium bromide (KBr) at low temperatures with or without the use of sodium borohydride (NaBH).

Characteristics of Ag-incorporated bioactive glasses prepared by a modified sol-gel method with a shortened synthesis time and without the use of catalysts.

This work presents the preparation of bioactive glasses 70SiO-(26 - )CaO-4PO-AgO (with = 0, 1, 3, 10 mol%) by a modified sol-gel method with reduced synthesis time based on hydrothermal reaction in a medium without acid or base catalysts. The synthetic materials were characterized by several physical-chemical techniques such as TG-DSC, XRD, SEM, TEM, and N adsorption/desorption measurement. The analysis data confirmed that the glass sample not containing Ag has a completely amorphous structure, while glass samples containing Ag exhibited a pure phase of metallic nano-silver in the glass amorphous phase.

The development of biomass-derived carbon-based photocatalysts for the visible-light-driven photodegradation of pollutants: a comprehensive review.

Biomass-derived carbonaceous materials have recently attracted extensive interest on account of their exceptional physicochemical properties which make them promising candidates for various critical applications. Several achieved advances have been reported in the recent literature, mainly focusing on the areas of energy storage and conversion. There is no review dedicated specifically to the potential applications of biomass-derived carbon-based photocatalytic materials for environmental remediation using the visible spectral region.

Fly ash-, foundry sand-, clay-, and pumice-based metal oxide nanocomposites as green photocatalysts.

Metal oxides possess exceptional physicochemical properties which make them ideal materials for critical photocatalytic applications. However, of major interest, their photocatalytic applications are hampered by several drawbacks, consisting of prompt charge recombination of charge carriers, low surface area, inactive under visible light, and inefficient as well as expensive post-treatment recovery. The immobilization of metal oxide semiconductors on materials possessing high binding strength eliminates the impractical and costly recovery of spent catalysts in large-scale operations.

Visualized SERS Imaging of Single Molecule by Ag/Black Phosphorus Nanosheets.

Unlabelled: Ag/BP-NS exhibit remarkable surface-enhanced Raman scattering performance with single-molecule detection ability. This remarkable enhancement can be attributed to the synergistic resonance enhancement of R6G molecular resonance, photo-induced charge transfer resonance and electromagnetic resonance. A new polarization-mapping method was proposed, which can quickly screen out single-molecule signals and prove that the obtained spectra are emitted by single molecule.

Prognostic Factors of Radiofrequency Ablation plus Systemic Chemotherapy for Unresectable Colorectal Cancer with Liver Metastasis.

Introduction: Survival outcomes in patients with unresectable colorectal cancer (CRC) liver metastasis treated by radiofrequency ablation (RFA) combined with systemic chemotherapy and correlation with potential prognostic factors were investigated. . A retrospective cohort study was conducted on 61 CRC patients with unresectable liver metastasis who underwent liver tumor-directed percutaneous RFA combined with conventional systemic chemotherapy between October 2013 and September 2018.

Synthesis of Pt-Pd Bimetallic Porous Nanostructures as Electrocatalysts for the Methanol Oxidation Reaction.

Pt-based bimetallic nanostructures have attracted a great deal of attention due to their unique nanostructures and excellent catalytic properties. In this study, we prepared porous Pt-Pd nanoparticles using an efficient, one-pot co-reduction process without using any templates or toxic reactants. In this process, Pt-Pd nanoparticles with different nanostructures were obtained by adjusting the temperature and ratio of the two precursors; and their catalytic properties for the oxidation of methanol were studied.

Fabrication of Semiconductor ZnO Nanostructures for Versatile SERS Application.

Since the initial discovery of surface-enhanced Raman scattering (SERS) in the 1970s, it has exhibited a huge potential application in many fields due to its outstanding advantages. Since the ultra-sensitive noble metallic nanostructures have increasingly exposed themselves as having some problems during application, semiconductors have been gradually exploited as one of the critical SERS substrate materials due to their distinctive advantages when compared with noble metals. ZnO is one of the most representative metallic oxide semiconductors with an abundant reserve, various and cost-effective fabrication techniques, as well as special physical and chemical properties.

Correction: High magnetisation, monodisperse and water-dispersible CoFe@Pt core/shell nanoparticles.

Correction for 'High magnetisation, monodisperse and water-dispersible CoFe@Pt core/shell nanoparticles' by Ngo T. Dung et al., Nanoscale, 2017, DOI: 10.

High magnetisation, monodisperse and water-dispersible CoFe@Pt core/shell nanoparticles.

High magnetisation and monodisperse CoFe alloy nanoparticles are desired for a wide range of biomedical applications. However, these CoFe nanoparticles are prone to oxidation, resulting in the deterioration of their magnetic properties. In the current work, CoFe alloy nanoparticles were prepared by thermal decomposition of cobalt and iron carbonyls in organic solvents at high temperatures.

Biomedical Applications of Advanced Multifunctional Magnetic Nanoparticles.

In this review, we have presented the latest results and highlights on biomedical applications of a class of noble metal nanoparticles, such as gold, silver and platinum, and a class of magnetic nanoparticles, such as cobalt, nickel and iron. Their most important related compounds are also discussed for biomedical applications for treating various diseases, typically as cancers. At present, both physical and chemical methods have been proved very successful to synthesize, shape, control, and produce metal- and oxide-based homogeneous particle systems, e.

Large-scale template-free synthesis of ordered mesoporous platinum nanocubes and their electrocatalytic properties.

Here we report a facile, one-pot and template-free approach to synthesize mesoporous monocrystalline Pt nanocubes with uniform shapes and sizes, in which small Pt particles with a size of ∼5 nm are three-dimensionally and periodically built up into cubes with a size of ∼50 nm. The forming process is illustrated through a novel meso-crystal self-assembly mechanism. Very interestingly, the mesoporous structures are ordered, which are thought to be beneficial to increase their catalytic activity.

Controlled synthesis of porous platinum nanostructures for catalytic applications.

Porous platinum, that has outstanding catalytic and electrical properties and superior resistant characteristics to corrosion, has been widely applied in chemical, petrochemical, pharmaceutical, electronic, and automotive industries. As the catalytic activity and selectivity depend on the size, shape and structure of nanomaterials, the strategies for controlling these factors of platinum nanomaterials to get excellent catalytic properties are discussed. Here, recent advances in the design and preparation of various porous platinum nanostructures are reviewed, including wet-chemical synthesis, electro-deposition, galvanic replacement reaction and de-alloying technology.

Synthesis and characterization of Fe-based metal and oxide based nanoparticles: discoveries and research highlights of potential applications in biology and medicine.

In this review, we have presented the controlled synthesis of Fe-based metal and oxide nanoparticles with large size by chemical methods. The issues of the size, shape and morphology of Fe nanoparticles are discussed in the certain ranges of practical applications in biology and medicine. The homogeneous nanosystems of Fe-based metal and oxide nanoparticles with various sizes and shapes from the nano-to-micro ranges can be used in order to meet the demands of the treatments of dangerous tumors and cancers through magnetic hyperthermia and magnetic resonance imaging (MRI).

Platinum and palladium nano-structured catalysts for polymer electrolyte fuel cells and direct methanol fuel cells.

In this review, we present the synthesis and characterization of Pt, Pd, Pt based bimetallic and multi-metallic nanoparticles with mixture, alloy and core-shell structure for nano-catalysis, energy conversion, and fuel cells. Here, Pt and Pd nanoparticles with modified nanostructures can be controllably synthesized via chemistry and physics for their uses as electro-catalysts. The cheap base metal catalysts can be studied in the relationship of crystal structure, size, morphology, shape, and composition for new catalysts with low cost.

Association mapping of salt tolerance in barley (Hordeum vulgare L.).

A spring barley collection of 192 genotypes from a wide geographical range was used to identify quantitative trait loci (QTLs) for salt tolerance traits by means of an association mapping approach using a thousand SNP marker set. Linkage disequilibrium (LD) decay was found with marker distances spanning 2-8 cM depending on the methods used to account for population structure and genetic relatedness between genotypes. The association panel showed large variation for traits that were highly heritable under salt stress, including biomass production, chlorophyll content, plant height, tiller number, leaf senescence and shoot Na(+), shoot Cl(-) and shoot, root Na(+)/K(+) contents.

Synthesis and characterization of polyhedral Pt nanoparticles: their catalytic property, surface attachment, self-aggregation and assembly.

In this paper, we presented the preparation procedure of Pt nanoparticles with the well-controlled polyhedral morphology and size by a modified polyol method using AgNO(3) in accordance with the reduction of H(2)PtCl(6) in EG at high temperature around 160°C. The methods of UV-vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and high resolution (HR) TEM measurements were used to characterize their surface morphology, size, and crystal structure. We have observed that the polyhedral Pt nanoparticles of sharp edges and corners were produced in the preferential homogenous growth as well as the formation of porous and large Pt particles by self-aggregation and assembly originating from as-prepared polyhedral Pt nanoparticles.

The synthesis and characterization of platinum nanoparticles: a method of controlling the size and morphology.

In this paper, Pt nanoparticles with good shapes of nanocubes and nano-octahedra and well-controlled sizes in the range 5-7 and 8-12 nm, respectively, have been successfully synthesized. The modified polyol method by adding silver nitrate and varying the molar ratio of the solutions of silver nitrate and H(2)PtCl(6) has been used to produce Pt nanoparticles of the size and shape to be controlled. The size and morphology of Pt nanoparticles have been studied by transmission electron microscopy (TEM) and high resolution TEM (HRTEM).