Reinforcing β-tricalcium phosphate scaffolds for potential applications in bone tissue engineering: impact of functionalized multi-walled carbon nanotubes.

Beta-tricalcium phosphate (β-TCP) scaffolds manufactured through the foam replication method are widely employed in bone tissue regeneration. The mechanical strength of these scaffolds is a significant challenge, partly due to the rheological properties of the original suspension. Various strategies have been explored to enhance the mechanical properties.

Controlled release of a non-steroidal anti-inflammatory drug from a photocurable polymeric calcium phosphate cement.

In this research, a photocurable composite based on tetracalcuim phosphate ceramic and, hydroxyethyl methacrylate-modified poly(acrylic-maleic acid) was developed and studied as a potential drug delivery system for bone defects. Different concentrations (5, 10 and 20 wt. %) of a non-steroidal anti-inflammatory drug, Indomethacin, were loaded on to the composite and its release behavior was investigated in phosphate buffered solution during 504 h.

A thematic analysis-based model for identifying the impacts of natural crises on a supply chain for service integrity: a text analysis approach.

Numerous studies have been conducted to identify the effects of natural crises on supply chain performance. Conventional analysis methods are based on either manual filter methods or data-driven methods. The manual filter methods suffer from validation problems due to sampling limitations, and data-driven methods suffer from the nature of crisis data which are vague and complex.

Wound closure, angiogenesis and antibacterial behaviors of tetracalcium phosphate/hydroxyethyl cellulose/hyaluronic acid/gelatin composite dermal scaffolds.

Polymeric and tetracalcium phosphate (TTCP)-containing polymeric scaffolds were fabricated using a freeze-drying technique, with a homogenous solution of hydroxyethyl cellulose (HEC)/hyaluronic acid (HA)/gelatin (G) or suspension of 15 or 20% TTCP) particles in HEC/HA/G solution. The morphology, phase composition, chemical bands, and swelling behavior of the scaffold were determined. fibroblast cell viability and migration potential of the scaffolds were determined by MTT, live/dead staining, and scratch assay for wound healing.

Bioorthogonal hydroxyethyl cellulose-based scaffold crosslinked via click chemistry for cartilage tissue engineering applications.

In this study, azide and alkyne moieties were introduced to the structure of citric acid-modified hydroxyethyl cellulose (HEC) and then through a bioorthogonal click chemistry method: Strain-promoted azide-alkyne cycloaddition, a novel crosslinked HEC scaffold (click sample) was obtained. Chemical modifications and successful crosslinking of the samples were assessed with FTIR and H NMR spectroscopy. Lyophilized samples exhibited a porous interconnected microarchitecture with desirable features for commensurate cartilage tissue engineering applications.

evaluation of curcumin-loaded chitosan-coated hydroxyapatite nanocarriers as a potential system for effective treatment of cancer.

Nanotechnology has many potential applications in cancer treatment. For example, nano-drug delivery systems (NDDS) with high bioavailability, biodegradability, and biocompatibility have been developed, in order to increase the therapeutic effects of anticancer drugs. Among these NDDS, high-performance hydroxyapatite (HA) nanoparticles are rapidly advancing in the targeted cancer treatment due to their numerous benefits.

The synergistic effects of SrF nanoparticles, YSZ nanoparticles, and poly-ε-l-lysin on physicomechanical, ion release, and antibacterial-cellular behavior of the flowable dental composites.

Resin-based pit-and-fissure sealants (flowable resin composites) were formulated using bisphenol-A-glycerolatedimethacrylate (Bis-GMA)-triethylene glycol dimethacrylate-(TEGDMA)-diurethanedimethacrylate (UDMA) mixed monomers and multiple fillers, including synthetic strontium fluoride (SrF) nanoparticles as a fluoride-releasing and antibacterial agent, yttria-stabilized zirconia (YSZ) nanoparticles as an auxiliary filler, and poly-ε-l-lysin (ε-PL) as an auxiliary antibacterial agent. Based on the physical, mechanical and initial antibacterial properties, the formulated nano-sealant containing 5 wt% SrF, 5 wt% YSZ and 0.5 wt% ε-PL was selected as the optimal specimen and examined for ion release and cytotoxicity.

Comparative analysis and properties evaluation of gelatin microspheres crosslinked with glutaraldehyde and 3-glycidoxypropyltrimethoxysilane as drug delivery systems for the antibiotic vancomycin.

In the present comparative study, gelatin microspheres (GMs) were prepared by emulsification-solvent-extraction method using well-known crosslinker: glutaraldehyde (GA) and biocompatible silane-coupling agent: glycidoxypropyltrimethoxysilane (GPTMS). Crosslinking with GA was done by a definite and common procedure, while GPTMS crosslinking potency was investigated after 5, 10, 24, and 48 h synthesis periods and the fabrication method was adjusted in order for preparation of GMs with optimized morphological and compositional characteristics. The prepared GMs were then evaluated and compared as drug delivery systems for the antibiotic vancomycin (Vm).

Synthesis, physicochemical, rheological and in-vitro characterization of double-crosslinked hyaluronic acid hydrogels containing dexamethasone and PLGA/dexamethasone nanoparticles as hybrid systems for specific medical applications.

Injectable hydrogels and biodegradable nanoparticles are using in tissue engineering applications and drug delivery systems. To improve physiochemical properties of biomaterials and to develop their applications, hybrid systems consist of hydrogels, and biodegradable nanoparticles were synthesized. In this study, hybrid systems based on double crosslinked hyaluronic acid and PLGA/Dexamethasone sodium phosphate (PLGADEX) nanoparticles are designed and synthesized in several steps.

Characterization and biological properties of a novel synthesized silicon-substituted hydroxyapatite derived from eggshell.

In the present study, the effect of adding different concentrations of silicon on physical, mechanical and biological properties of a synthesized aqueous precipitated eggshell-derived hydroxyapatite (e-HA) was evaluated. No secondary phases were detected by X-ray diffraction for the specimens e-HA and e-HA containing silicon (Si-e-HAs) before and after heating at 1200°C. A reduction in the crystallite size and a-axis as well as an increase in c-axis was occurred when silicon replacement was happened in the structure of e-HA.

In vitro proliferation and differentiation of human bone marrow mesenchymal stem cells into osteoblasts on nanocomposite scaffolds based on bioactive glass (64SiO-31CaO-5PO)-poly-l-lactic acid nanofibers fabricated by electrospinning method.

Electrospinning method was employed for fabrication of SiO-CaO-PO bioactive glass (BG) nanofibers, poly-l-lactic acid (PLLA) nanofibers and nanocomposite scaffolds fabricated from as-prepared nanofibers. Characterization of the prepared nanofibers and scaffolds by XRD, FTIR, and SEM techniques revealed the formation of nanofibers with mean diameter of about 500nm and fully fibrous scaffolds with porous structure and interconnected pores. The growth, viability and proliferation of cultured human bone marrow mesenchymal stem cells in the fabricated nanofibers and bioactive glass-poly-l-lactic acid (BG-PLLA) nanocomposite scaffolds were studied using various biological assays including MTT, ALP activity, calcium deposit content, Alizarin red staining, and RT-PCR test.

The Effective Role of Hydroxyapatite Based Composites in Anticancer Drug Delivery Systems.

Tumors consist of a heterogeneous population of cancer cells carrying multiple genetic mutations. During the past few decades, efforts have focused on curing cancer using various methods. However, traditional cancer therapies still carry some drawbacks, such as limited application for only a few cancer types, killing of normal cells, poor specificity, and associated toxicity.

Detection and qualification of optimum antibacterial and cytotoxic activities of silver-doped bioactive glasses.

This study aims to detect the optimum antibacterial activity of silver-doped bioactive glasses (Ag-BGs) for prevention of post-transplant infections in tissue engineering. The results have shown that the Ag-BG samples had broad-spectrum antibacterial efficacy in an Ag concentration-dependent manner. The 2% Ag-BG had the highest effect during the first 10 min to 72 h.

Effect of adding nano-titanium dioxide on the microstructure, mechanical properties and in vitro bioactivity of a freeze cast merwinite scaffold.

In the present research, merwinite (M) scaffolds with and without nano-titanium dioxide (titania) were synthesized by water-based freeze casting method. Two different amounts (7.5 and 10 wt%) of n-TiO2 were added to M scaffolds.

Efficient removal of lead (II) ions and methylene blue from aqueous solution using chitosan/Fe-hydroxyapatite nanocomposite beads.

Chitosan is a well-known sorbent and effective in the uptake of anionic or reactive dyes, but it has deficiency in adsorption of basic dyes. In this work, chitosan/Fe-substituted hydroxyapatite composite beads were prepared in a different ratio via embedding of hydroxyapatite into chitosan solution for removal of basic dye and heavy metal from aqueous solution. The composite beads were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy in order to reveal their composition and surface morphology.

In vitro biocompatibility of chitosan/hyaluronic acid-containing calcium phosphate bone cements.

The need for bone repair has increased as the population ages. In this research, calcium phosphate cements, with and without chitosan (CS) and hyaluronic acid (HA), were synthesized. The composition and morphological properties of cements were evaluated by X-ray diffraction and scanning electron microscopy.

Preparation of laminated poly(ε-caprolactone)-gelatin-hydroxyapatite nanocomposite scaffold bioengineered via compound techniques for bone substitution.

In this research, new bioactive nanocomposite scaffolds were successfully developed using poly(ε-caprolactone) (PCL), cross-linked gelatin and nanoparticles of hydroxyapatite (HAp) after testing different solvents and methods. First, HAp powder was synthesized via a chemical precipitation technique and characterized. Then, the nanocomposites were prepared through layer solvent casting combined with freeze-drying and lamination techniques.

Evaluation of a bioceramic-based nanocomposite material for controlled delivery of a non-steroidal anti-inflammatory drug.

In this study, nanocomposite of 50wt% calcium sulfate and 50wt% nanocrystalline apatite was produced and its biocompatibility, physical and structural properties were compared with pure calcium sulfate (CS) cement. Indomethacin (IM), a non-steroidal anti-inflammatory drug, was also loaded on both CS and nanocomposite cements and its in vitro release was evaluated over a period of time. The effect of the loaded IM on basic properties of the cements was also investigated.

Preparation and characterization of calcium sulfate-biomimetic apatite nanocomposites for controlled release of antibiotics.

In the present study, release properties of antibiotic-loaded cement-type nanocomposites of biomimetic apatite and calcium sulfate were studied. Nanocrystalline component of the nanocomposite was synthesized by soaking a mixture of calcium phosphate reactants in tris-buffered simulated body fluid (SBF). The release patterns of cephalexin and gentamicin from both pure calcium sulfate and nanocomposite cements into SBF were collected up to 144 h and fitted by Higuchi and Weibull equations.