Multi response optimization of waste activated sludge oxidation and azo dye reduction in microbial fuel cell.

Microbial fuel cell technology draws attention with its ability to directly recover electrical energy from various organic materials. In this study, the operating conditions affecting the oxidation-reduction and electricity generation efficiency of MFC were optimized using the Taguchi Experimental Design model. Optimization was carried out for maximum power density, coulombic efficiency, azo dye removal, and COD removal.

The preference of the most appropriate radical-based regeneration process for spent activated carbon by the PROMETHEE approach.

In this study, regeneration of spent granular activated carbon (GAC) with reactive dye by hydroxyl and sulfate radical-based advanced oxidation processes (microwave (MW) +persulfate (PS)), (Fe(II)+ PS), and (O + HO) were evaluated. The adsorption of the dye to the GAC surface was characterized by chemisorption and Langmuir isotherm. Regeneration processes have been optimized by the response surface methodology to determine the operating conditions that will provide the highest adsorptive capacity.

Optimization of the adsorption of diclofenac by activated carbon and the acidic regeneration of spent activated carbon.

Diclofenac sodium (DCF) is a non-steroidal anti-inflammatory drug. It has been classified as ecotoxic even at low concentrations. In this study, adsorption of DCF on coconut shell-based granular activated carbon (GAC) and regeneration of spent GAC with hydrochloric acid (HCl) were investigated.

Multi-Response Optimization of Process Parameters for Imidacloprid Removal by Reverse Osmosis Using Taguchi Design.

  In this study, a multi-response optimization method using Taguchi's robust design approach is proposed for imidacloprid removal by reverse osmosis. Tests were conducted with different membrane type (BW30, LFC-3, CPA-3), transmembrane pressure (TMP = 20, 25, 30 bar), volume reduction factor (VRF = 2, 3, 4), and pH (3, 7, 11). Quality and quantity of permeate are optimized with the multi-response characteristics of the total dissolved solid (TDS), conductivity, imidacloprid, and total organic carbon (TOC) rejection ratios and flux of permeate.

Removal of Bisphenol A aqueous solution using surfactant-modified natural zeolite: Taguchi's experimental design, adsorption kinetic, equilibrium and thermodynamic study.

In this study, surfactant-modified natural zeolite was used to remove Bisphenol A (BPA) from aqueous solutions. Kinetics, equilibrium and thermodynamics of BPA adsorption on the adsorbent surfaces were investigated. The experimental data were described with the Temkin isotherm and the pseudo-second- order kinetic model.

Bentonite for ciprofloxacin removal from aqueous solution.

Ciprofloxacin hydrochloride (CIP) is the second generation of fluoroquinolone antibiotics whose residues are found in wastewater and surface water. CIP has high aqueous solubility under different pH conditions and high stability in the soil system. In this study, bentonite was used as a potential sorbent for the removal of CIP from aqueous solutions using batch experiments.

Investigation of organic nitrogen and carbon removal in the aerobic digestion of various sludges.

Nitrification and carbon removal are investigated in aerobic batch digestion of various sludges. The experiments are carried out with activated sludge (Test 1) and with a mixture of activated and primary settling sludge (Test 2). The nitrification rate was monitored, measuring the NO2- concentration.

Wet oxidation: a pre-treatment procedure for sludge.

Wet oxidation process is specially effective for wastes with a high organic matter which can not be removed by conventional treatment methods. The digested and raw activated sludges of PAKMAYA yeast factory are treated by wet oxidation process. The liquid-phase organic matter concentration [as total organic carbon (TOC)] was increased by 16.