Electrochemical detection of poly(3-hydroxybutyrate) production from Burkholderia glumae MA13 using a molecularly imprinted polymer-reduced graphene oxide modified electrode.

The development and application of an electrochemical sensor is reported for detection of poly(3-hydroxybutyrate) (P3HB) - a bioplastic derived from agro-industrial residues. To overcome the challenges of molecular imprinting of macromolecules such as P3HB, this study employed methanolysis reaction to break down the P3HB biopolymer chains into methyl 3-hydroxybutyrate (M3HB) monomers. Thereafter, M3HB were employed as the target molecules in the construction of molecularly imprinted sensors.

Triphasic Oxygen Storage in Wet Nanoparticulate Polymer of Intrinsic Microporosity (PIM-1) on Platinum: An Electrochemical Investigation.

The triphasic interaction of gases with electrode surfaces immersed in aqueous electrolyte is crucial in electrochemical technologies (fuel cells, batteries, sensors). Some microporous materials modify this interaction locally via triphasic storage capacity for gases in aqueous environments linked to changes in apparent oxygen concentration and diffusivity (as well as activity and reactivity). Here, a nanoparticulate polymer of intrinsic microporosity (PIM-1) in aqueous electrolyte is shown to store oxygen gas and thereby enhance electrochemical signals for oxygen reduction in aqueous media.

Alternative method for rhamnolipids quantification using an electrochemical platform based on reduced graphene oxide, manganese nanoparticles and molecularly imprinted Poly(L-Ser).

Rhamnolipids (RHLs) are promising biosurfactants with important applications in several industrial segments. These compounds are produced through biotechnological processes using the bacteria Pseudomonas Aeruginosa. The main methods of analyzing this compound are based on chromatographic techniques.

Electrochemical sensor based on carbon nanotube decorated with manganese oxide nanoparticles for naphthalene determination.

In this work, an electrochemical sensor was developed for the determination of naphthalene (NaP) in well water samples, based on a glass carbon electrode (GCE) modified as a nanocomposite of manganese oxides (MnO) and COOH-functionalized multi-walled carbon nanotubes (MWCNT). The synthesis of MnO nanoparticles was performed by the sol-gel method. The nanocomposite was obtained by mixing MnO and MWCNT with the aid of ultrasound, followed by stirring for 24 h.

Voltammetric determination of sulfur in biodiesel microemulsion using a silver solid amalgam electrode.

Monitoring sulfur in biodiesel is of fundamental importance because even in low concentrations, it can harm the operation of the engine parts and increase the emission of toxic gases and particulate material. Hence, a simple, quick and sensitive adsorptive stripping voltammetry (AdSV) method based on a silver solid amalgam electrode (AgSAE) was developed to determine sulfur in biodiesel. The novel electrochemical method was evaluated through the linear sweep adsorptive stripping voltammetry (LSAdSV), square wave adsorptive stripping voltammetry (SWAdSV) and differential pulse adsorptive stripping voltammetry (DPAdSV) in a NH/NH buffer solution (pH 9.

Using a disposable platform based on reduced graphene oxide, iron nanoparticles and molecularly imprinted polymer for voltammetric determination of vanillic acid in fruit peels.

This work reports the development and application of a disposable electrochemical platform for vanillic acid (VA) detection using screen-printed electrode modified with reduced graphene oxide, iron nanoparticles and molecularly imprinted poly(pyrrole) film. The electrochemical platform was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. Using optimized conditions, the proposed disposable platform presented linear concentration ranges of 1.

Sample preparation and antibiotic quantification in vinasse generated from sugarcane ethanol fuel production.

Vinasse - liquid organic residue derived from the production of sugarcane ethanol fuel, has been applied as soil amendment via fertigation for decades in Brazil. This organic residue is an important source of nutrients and water for sugarcane crops. Through fertigation, approximately 400 billion liters of vinasse are recycled annually.

Underivatized amino acids detection by anion-exchange chromatography coupled to a nanostructured detector.

This work reports the development of a fast and reliable amperometric sensor for the detection of amino acids. The detector was constructed using copper nanoparticles (CuNPs) supported on reduced graphene oxide (RGO) modified glassy carbon electrode (CuNPs-RGO/GCE) and based on the application of high performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Under optimized isocratic HPAEC-PAD conditions (using 40 mmol L NaOH as mobile phase, flow rate of 0.

Electrosynthesis of three-dimensional nanoporous nickel on screen-printed electrode used for the determination of narirutin in citrus wastewater.

In this study, an electrochemical sensor was designed for the detection of narirutin using three-dimensional nanostructured porous nickel on screen-printed electrode (3DnpNi/SPE). The modified electrode was successfully synthesized by the dynamic hydrogen bubble template method. The 3DnpNi/SPE was characterized by spectroscopic, microscopic, and electrochemical methods.

Fructose determination in fruit juices using an electrosynthesized molecularly imprinted polymer on reduced graphene oxide modified electrode.

The present work reports the development of a novel electrochemical sensor for the selective detection of fructose. The sensor was developed through electropolymerization of a molecularly imprinted polymer film on a reduced graphene oxide modified electrode. The modified electrode was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy, atomic force microscopy and RAMAN spectroscopy.

Pressurized Liquid Extraction (PLE) and QuEChERS evaluation for the analysis of antibiotics in agricultural soils.

Vinasse, a liquid waste which originates from the production of ethanol fuel from sugarcane, has been widely used as soil amendment in Brazil. An important concern that arises from vinasse reuse is the dissemination of antibiotics to the environment through crop soils. This work evaluated the performance of Pressurized Liquid Extraction (PLE) and QuEChERS (quick, easy, cheap, effective, rugged and safe) to extract several multiple-class antibiotics, such as cephalosporins, fluoroquinolones, ionophores, lincosamides, macrolides, quinolones, streptogramin, sulfonamides, tetracyclines and others, from agricultural soils.

Identification of organic contaminants in vinasse and in soil and groundwater from fertigated sugarcane crop areas using target and suspect screening strategies.

This work evaluated for the first time the sustainability of vinasse reuse as a fertilizer in sugarcane crops by assessing the occurrence of organic contaminants and their potential for dissemination to soils and groundwater in fertigated areas. A comprehensive screening of organic contaminants was performed in vinasse, soil and groundwater using target analysis, to investigate the occurrence of multiple-class antibiotics, in combination with suspect screening using NORMAN Digital Sample Freezing Platform. Even though antibiotics are used in the ethanol production process and were expected to be ubiquitous contaminants, they were not detected in any of the samples.

Electrochemical sensor based on reduced graphene oxide and molecularly imprinted poly(phenol) for d-xylose determination.

The present work reports the development of an electrochemical sensor based on molecularly imprinted polymer for the determination of d-xylose. This is the first report of its kind in the literature. The sensor was prepared through the modification of a glassy carbon electrode with reduced graphene oxide and molecularly imprinted poly(phenol) film.

Electrochemical sensing of lactate by using an electrode modified with molecularly imprinted polymers, reduced graphene oxide and gold nanoparticles.

This paper reports on a sensitive and selective electrochemical sensor for lactic acid. The sensor is based on molecularly imprinted polymers (MIP), obtained on glassy carbon electrode (GCE) modified with reduced graphene oxide and gold nanoparticles. The MIP was obtained by electropolymerization of the o-phenylenediamine (o-PD) on the modified surface of the GCE in the presence of lactic acid.

Amperometric determination of myo-inositol by using a glassy carbon electrode modified with molecularly imprinted polypyrrole, reduced graphene oxide and nickel nanoparticles.

This paper reports on the development of an amperometric method for the determination of myo-inositol. The method involves coating of a glassy carbon electrode (GCE) with a molecularly imprinted polymer (MIP) and reduced graphene oxide (RGO) that was modified with nickel nanoparticles (NiNPs). The MIP was prepared by electropolymerization of pyrrole on the surface of the GCE in the presence of myo-inositol molecules.

D-mannitol sensor based on molecularly imprinted polymer on electrode modified with reduced graphene oxide decorated with gold nanoparticles.

An electrochemical sensor for D-mannitol based on molecularly imprinted polymer on electrode modified with reduced graphene oxide decorated with gold nanoparticles was developed in this present work. The sensor was constructed for the first time via the electropolymerization of o-phenylenediamine (o-PD) over a surface containing reduced graphene oxide (RGO) and gold nanoparticles (AuNP) in the presence of D-mannitol molecules. The surface modification with AuNP/RGO-GCE facilitated the charge transfer processes of [Fe(CN)], which was used as an electrochemical probe.

Determination of furanic aldehydes in sugarcane bagasse by high-performance liquid chromatography with pulsed amperometric detection using a modified electrode with nickel nanoparticles.

A glassy carbon electrode chemically modified with nickel nanoparticles coupled with reversed-phase chromatography with pulsed amperometric detection was used for the quantitative analysis of furanic aldehydes in a real sample of sugarcane bagasse hydrolysate. Chromatographic separation was carried out in isocratic conditions (acetonitrile/water, 1:9) with a flow rate of 1.0 mL/min, a detection potential of -50 mV vs.

A simple and fast method for the production and characterization of methylic and ethylic biodiesels from tucum oil via an alkaline route.

A simple, fast, and complete route for the production of methylic and ethylic biodiesel from tucum oil is described. Aliquots of the oil obtained directly from pressed tucum (pulp and almonds) were treated with potassium methoxide or ethoxide at 40°C for 40 min. The biodiesel form was removed from the reactor and washed with 0.

Effect of a nanostructured dendrimer-naloxonazine complex on endogenous opioid peptides μ1 receptor-mediated post-ictal antinociception.

Unlabelled: The aim of this study was to investigate the capacity of the host dendrimer DAB-Am-16 as a drug carrier to reduce the time required for the encapsulated naloxonaxine to establish an irreversible covalent bond with μ(1)-opioid receptor (resulting in a pharmacologically selective effect). The efficacy of dendrimer-naloxonazine nanocomplex (DNC) was studied in antinociception induced by convulsions elicited by intraperitoneal (IP) administration of pentylenetetrazole, and analgesia was measured by the tail-flick test. We found that animals showed increased tail-flick latencies following convulsions.

Determination of free glycerol in biodiesel at a platinum oxide surface using potential cycling technique.

A novel, inexpensive and fast method based on the electrooxidation of glycerol on platinum electrodes by the potential cycling technique has been designed for the determination of free glycerol in biodiesel. A wide range of linearity was achieved between 15 and 150 mg L(-1) (0.16 and 1.

Determination of potassium ions in biodiesel using a nickel(II) hexacyanoferrate-modified electrode.

In this work, nickel hexacyanoferrate-modified electrode was developed to determine potassium ions in biodiesel by potentiometry. The modified electrodes exhibit a linear response to potassium ions in the concentration range of 4.0 x 10(-5) to 1.

Rapid and sensitive method for the determination of acetaldehyde in fuel ethanol by high-performance liquid chromatography with UV-Vis detection.

A high-performance liquid chromatography (HPLC) method for the determination of acetaldehyde in fuel ethanol was developed. Acetaldehyde was derivatized with 0.900 mL 2,4-dinitrophenylhydrazine (DNPHi) reagent and 50 microL phosphoric acid 1 mol L(-1) at a controlled room temperature of 15 degrees C for 20 min.

Simultaneous determination of zinc, copper, lead, and cadmium in fuel ethanol by anodic stripping voltammetry using a glassy carbon-mercury-film electrode.

A new, versatile, and simple method for quantitative analysis of zinc, copper, lead, and cadmium in fuel ethanol by anodic stripping voltammetry is described. These metals can be quantified by direct dissolution of fuel ethanol in water and subsequent voltammetric measurement after the accumulation step. A maximum limit of 20% ( v/ v) ethanol in water solution was obtained for voltammetric measurements without loss of sensitivity for metal species.

Voltammetric determination of fenbendazole in veterinarian formulations.

A versatile voltammetric method for quantitative determination of fenbendazole (FBZ) in commercial tablets has been proposed, where direct dissolution of tablets is carried out in 0.1 mol l(-1) tetrabutylamoniun tetrafluorborate containing dimethylformamide solutions. Linear sweep (LSV), square wave (SWV) and differential pulse (DPV) voltammetry techniques were applied to study FBZ at a glassy carbon electrode, exhibiting a well defined irreversible oxidation peak at 1.