Crystalline AuNP-Decorated Strontium Niobate Thin Films: Strain-Controlled AuNP Morphologies and Optical Properties for Plasmonic Applications.

Gold nanoparticle (AuNP) decoration is a commonly used method to enhance the optical responses in many applications such as photocatalysis, biosensing, solar cells, etc. The morphology and structure of AuNPs are essential factors determining the functionality of the sample. However, tailoring the growth mechanism of AuNPs on an identical surface is not straightforward.

Toward Fabrication of Devices Based on Graphene/Oxide Multilayers.

Owing to its high electrical conductivity, low density, and flexibility, graphene has great potential for use as a building block in a wide range of applications from nanoelectronics to biosensing and high-frequency devices. For many device applications, it is required to deposit dielectric materials on graphene at high temperatures and in ambient oxygen. This has been proven to be highly challenging because these conditions cause significant degradation in graphene.

Optimizing Hot Electron Harvesting at Planar Metal-Semiconductor Interfaces with Titanium Oxynitride Thin Films.

Understanding metal-semiconductor interfaces is critical to the advancement of photocatalysis and sub-bandgap solar energy harvesting where electrons in the metal can be excited by sub-bandgap photons and extracted into the semiconductor. In this work, we compare the electron extraction efficiency across Au/TiO and titanium oxynitride (TiON)/TiO interfaces, where in the latter case the spontaneously forming oxide layer (TiO) creates a metal-semiconductor contact. Time-resolved pump-probe spectroscopy is used to study the electron recombination rates in both cases.

Tunable Three-Dimensional Plasmonic Arrays for Large Near-Infrared Fluorescence Enhancement.

Metal-enhanced fluorescence (MEF), resulting from the near-field interaction of fluorophores with metallic nanostructures, has emerged as a powerful tool for dramatically improving the performance of fluorescence-based biomedical applications. Allowing for lower autofluorescence and minimal photoinduced damage, the development of multifunctional and multiplexed MEF platforms in the near-infrared (NIR) windows is particularly desirable. Here, a low-cost fabrication method based on nanosphere lithography is applied to produce tunable three-dimensional (3D) gold (Au) nanohole-disc arrays (Au-NHDAs).

Continuous-wave room-temperature diamond maser.

The maser-the microwave progenitor of the optical laser-has been confined to relative obscurity owing to its reliance on cryogenic refrigeration and high-vacuum systems. Despite this, it has found application in deep-space communications and radio astronomy owing to its unparalleled performance as a low-noise amplifier and oscillator. The recent demonstration of a room-temperature solid-state maser that utilizes polarized electron populations within the triplet states of photo-excited pentacene molecules in a p-terphenyl host paves the way for a new class of maser.

Ferroelectric thin film acoustic devices with electrical multiband switching ability.

Design principles of a new class of microwave thin film bulk acoustic resonators with multiband resonance frequency switching ability are presented. The theory of the excitation of acoustic eigenmodes in multilayer ferroelectric structures is considered, and the principle of selectivity for resonator with an arbitrary number of ferroelectric layers is formulated. A so called "criterion function" is suggested that allows to determine the conditions for effective excitation at one selected resonance mode with suppression of other modes.

Titanium Oxynitride Thin Films with Tunable Double Epsilon-Near-Zero Behavior for Nanophotonic Applications.

Titanium oxynitride (TiON) thin films are fabricated using reactive magnetron sputtering. The mechanism of their growth formation is explained, and their optical properties are presented. The films grown when the level of residual oxygen in the background vacuum was between 5 nTorr to 20 nTorr exhibit double epsilon-near-Zero (2-ENZ) behavior with ENZ1 and ENZ2 wavelengths tunable in the 700-850 and 1100-1350 nm spectral ranges, respectively.

Solid-state source of intense yellow light based on a Ce:YAG luminescent concentrator.

A luminescent concentrator functioning as a bright source of yellow light is reported. It comprises a waveguide made of cerium-doped YAG crystal, in the form of a long-thin rectangular strip, surrounded by flowing air and optically pumped from both sides with blue light from arrays of high-efficiency InGaN LEDs. Phosphor-converted yellow light, generated within the strip, is guided to a glass taper that is butt-coupled to one of the strip's end faces.

Nanosecond time-resolved characterization of a pentacene-based room-temperature MASER.

The performance of a room temperature, zero-field MASER operating at 1.45 GHz has been examined. Nanosecond laser pulses, which are essentially instantaneous on the timescale of the spin dynamics, allow the visible-to-microwave conversion efficiency and temporal response of the MASER to be measured as a function of excitation energy.

Growth of Epitaxial Oxide Thin Films on Graphene.

The transfer process of graphene onto the surface of oxide substrates is well known. However, for many devices, we require high quality oxide thin films on the surface of graphene. This step is not understood.

Band gap bowing in NixMg1-xO.

Epitaxial transparent oxide NixMg1-xO (0 ≤ x ≤ 1) thin films were grown on MgO(100) substrates by pulsed laser deposition. High-resolution synchrotron X-ray diffraction and high-resolution transmission electron microscopy analysis indicate that the thin films are compositionally and structurally homogeneous, forming a completely miscible solid solution. Nevertheless, the composition dependence of the NixMg1-xO optical band gap shows a strong non-parabolic bowing with a discontinuity at dilute NiO concentrations of x < 0.

Tuning the electrocaloric enhancement near the morphotropic phase boundary in lead-free ceramics.

The need for more energy-efficient and environmentally-friendly alternatives in the refrigeration industry to meet global emission targets has driven efforts towards materials with a potential for solid state cooling. Adiabatic depolarisation cooling, based on the electrocaloric effect (ECE), is a significant contender for efficient new solid state refrigeration techniques. Some of the highest ECE performances reported are found in compounds close to the morphotropic phase boundary (MPB).

Significant Broadband Photocurrent Enhancement by Au-CZTS Core-Shell Nanostructured Photocathodes.

Copper zinc tin sulfide (CZTS) is a promising material for harvesting solar energy due to its abundance and non-toxicity. However, its poor performance hinders their wide application. In this paper gold (Au) nanoparticles are successfully incorporated into CZTS to form Au@CZTS core-shell nanostructures.

Optimizing strontium ruthenate thin films for near-infrared plasmonic applications.

Several new plasmonic materials have recently been introduced in order to achieve better temperature stability than conventional plasmonic metals and control field localization with a choice of plasma frequencies in a wide spectral range. Here, epitaxial SrRuO3 thin films with low surface roughness fabricated by pulsed laser deposition are studied. The influence of the oxygen deposition pressure (20-300 mTorr) on the charge carrier dynamics and optical constants of the thin films in the near-infrared spectral range is elucidated.

Enhanced magnetic Purcell effect in room-temperature masers.

Recently, the world's first room-temperature maser was demonstrated. The maser consisted of a sapphire ring housing a crystal of pentacene-doped p-terphenyl, pumped by a pulsed rhodamine-dye laser. Stimulated emission of microwaves was aided by the high quality factor and small magnetic mode volume of the maser cavity yet the peak optical pumping power was 1.

On stoichiometry and intermixing at the spinel/perovskite interface in CoFe2O4/BaTiO3 thin films.

The performance of complex oxide heterostructures depends primarily on the interfacial coupling of the two component structures. This interface character inherently varies with the synthesis method and conditions used since even small composition variations can alter the electronic, ferroelectric, or magnetic functional properties of the system. The focus of this article is placed on the interface character of a pulsed laser deposited CoFe2O4/BaTiO3 thin film.

Experimental observation of negative capacitance in ferroelectrics at room temperature.

Effective negative capacitance has been postulated in ferroelectrics because there is a hysteresis in plots of polarization-electric field. Compelling experimental evidence of effective negative capacitance is presented here at room temperature in engineered devices, where it is stabilized by the presence of a paraelectric material. In future integrated circuits, the incorporation of such negative capacitance into MOSFET gate stacks would reduce the subthreshold slope, enabling low power operation and reduced self-heating.

Predicting the fluorescent enhancement rate by gold and silver nanospheres using finite-difference time-domain analysis.

Metal-induced fluorescence enhancement (MIFE) is a promising strategy for increasing the sensitivity of fluorophores used in biological sensors. This study uses the finite-difference time-domain technique to predict the fluorescent enhancement rate of a fluorophore molecule in close proximity to a gold or silver spherical nanoparticle. By considering commercially available fluorescent dyes the computed results are compared with the published experimental data.

Tunable synthesis of ordered zinc oxide nanoflower-like arrays.

A novel approach to fabricate an ordered array of ZnO nanoflowers, consisting of uniform polymer cores of 100s of nanometer diameter decorated with ZnO nanorods of 10s of nanometer diameter, is presented. The 2-stage method combines the formation of ZnO seed layer by pulsed laser deposition (PLD) onto a colloidally assembled polystyrene sphere monolayer and the subsequent hydrothermal growth of ZnO nanowires (NWs). The main advantages of this methodology are low cost and the large area scalability of perfectly ordered hierarchical structures.

Au nanostructures by colloidal lithography: from quenching to extensive fluorescence enhancement.

Enhanced local electric fields are created by nanoparticles when pumped at wavelengths corresponding to Localised Surface Plasmon Resonance (LSPR) modes, leading to Metal Induced Fluorescence Enhancement (MIFE). This paper describes the fluorescent enhancement due to reproducible and tuneable Au nanostructures on glass substrates fabricated over large areas by colloidal lithography. Interparticle separation, particle resonance, and the fluorescent dye properties (quantum yield and emission/excitation wavelengths) are all important factors influencing the fluorescent enhancement.

Optical characteristics of silicon nanowires grown from tin catalyst layers on silicon coated glass.

The optical characteristics of silicon nanowires grown on Si layers on glass have been modeled using the FDTD (Finite Difference Time Domain) technique and compared with experimental results. The wires were grown by the VLS (vapour-liquid-solid) method using Sn catalyst layers and exhibit a conical shape. The resulting measured and modeled absorption, reflectance and transmittance spectra have been investigated as a function of the thickness of the underlying Si layer and the initial catalyst layer, the latter having a strong influence on wire density.

Room-temperature solid-state maser.

The invention of the laser has resulted in many innovations, and the device has become ubiquitous. However, the maser, which amplifies microwave radiation rather than visible light, has not had as large an impact, despite being instrumental in the laser's birth. The maser's relative obscurity has mainly been due to the inconvenience of the operating conditions needed for its various realizations: atomic and free-electron masers require vacuum chambers and pumping; and solid-state masers, although they excel as low-noise amplifiers and are occasionally incorporated in ultrastable oscillators, typically require cryogenic refrigeration.

Intrinsic microwave dielectric loss of lanthanum aluminate.

The intrinsic dielectric properties of LaAlO₃ were investigated to understand the microwave properties of several materials containing LaAlO₃. In this study, LaAlO₃ single crystals were prepared by the Czochralski method. The temperature dependence of the dielectric properties and neutron inelastic scattering of the single crystals were measured.

Scattering of light into silicon by spherical and hemispherical silver nanoparticles.

The interaction of light with noble metal nanoparticles deposited onto the top surface of a semiconductor has been investigated using the finite-difference time-domain method. The scattering is calculated for spherical and hemispherical silver nanoparticles placed in a periodic two-dimensional array on the upper surface of a semi-infinite silicon substrate. The results show that the contact area between hemispherical particles and the silicon significantly reduces the forward scattering.