Second-order nonlinear mixing processes involving a leaky guided acoustic wave.

Quasi-phasematched mixing processes of acoustic waves via second-order nonlinearity are analyzed with two perfectly guided waves generating a leaky wave. The efficiency of such processes is quantified by an acoustic nonlinearity parameter (ANP), defined as the linear growth rate of the leaky wave's amplitude in the initial stage of its spatial evolution. Two approximate ways of estimating the ANP of such processes are suggested.

Generation of time-independent torque by ultrasonic guided waves.

The excitation of acoustic waves by a unidirectional transducer, integrated in a piezoelectric cylindrical tube or disk, can lead to a time-independent torque. This phenomenon, demonstrated earlier in experiments and analyzed with coupling-of mode theory, is explained in detail, starting on the level of lattice dynamics of a piezoelectric crystal. Expressions are derived for the stationary torque in the form of integrals over the volume or surface of the piezoelectric, involving the electric potential and displacement field associated with the acoustic waves generated by the transducer.

Energy-Trapping Characteristics of Lateral Field Excited GdCOB Crystal Bulk Acoustic Wave Devices Based on Stepped Electrodes.

In this work, high-frequency forced vibrations of lateral field excitation (LFE) devices with stepped electrodes based on monoclinic crystals GdCOB are modeled, and the influence laws of the device parameters (the step number, size, and thickness of the stepped electrodes) on the energy-trapping effects of the device are revealed. The results show that the step number has a significant effect on the energy-trapping effect of the device: with the increase in the step number, the stronger energy-trapping effect of the device can be obtained; with the increase in the thickness difference of two layers of electrodes, the energy-trapping effect of the device becomes stronger; with the increase in the difference of the electrode radius, the energy-trapping effect of the device is enhanced gradually. The results of this work can provide an important theoretical basis for the design of stepped-electrode LFE resonators and sensors with high-quality factors based on monoclinic crystals.

Pure- and Pseudo-Lateral-Field-Excitation Characteristics of Relaxor Ferroelectric Single Crystal PMN-PT.

The relaxor ferroelectric single crystal (1-x)Pb(MgNb)O-xPbTiO (PMN-PT) has high piezoelectric constants, and thus has a good application prospect in the field of highly sensitive piezoelectric sensors. In this paper, for relaxor ferroelectric single crystal PMN-PT, the bulk acoustic wave characteristics on pure- and pseudo-lateral-field-excitation (pure- and pseudo-LFE) modes are investigated. LFE piezoelectric coupling coefficients and acoustic wave phase velocities for PMN-PT crystals in different cuts and electric field directions are calculated.

Backward Acoustic Waves in Piezoelectric Plates: Possible Application as Base for Liquid Sensors.

Backward acoustic waves are characterized by oppositely directed phase and group velocities. These waves can exist in isotropic and piezoelectric plates. They can be detected using a set of interdigital transducers with different spatial periods located on the same piezoelectric substrate.

The Peculiarities of the Acoustic Waves of Zero-Order Focusing in Lithium Niobate Plate.

In this research, beam focusing in lithium niobate plate was studied for fundamental anti-symmetric (A) and symmetric (S) Lamb waves, and the shear-horizontal (SH) wave of zero-order. Using the finite element method, appropriate configuration of the interdigital transducer with arc-like electrodes was modeled accounting for the anisotropy of the slowness curves and dispersion of the modes in the plate. Profiles of the focalized acoustic beams generated by the proposed transducer were theoretically analyzed.

The Experimental Registration of the Evanescent Acoustic Wave in YX LiNbO Plate.

Evanescent acoustic waves are characterized by purely imaginary or complex wavenumbers. Earlier, in 2019 by using a three dimensional (3D) finite element method (FEM) the possibility of the excitation and registration of such waves in the piezoelectric plates was theoretically shown. In this paper the set of the acoustically isolated interdigital transducers (IDTs) with the different spatial periods for excitation and registration of the evanescent acoustic wave in Y-cut X-propagation direction of lithium niobate (LiNbO) plate was specifically calculated and produced.

Excitation and detection of evanescent acoustic waves in piezoelectric plates: Theoretical and 2D FEM modeling.

This paper presents the results of the theoretical and 2D FEM modeling excitation and detection of evanescent acoustic waves in piezoelectric plates. By application of 2D ordinary differential equations derived by Auld, we obtained the dispersion curves of A and SH waves in YX LiNbO and YX KNbO plates in proximity to a zero group velocity point. The branches corresponding to evanescent acoustic waves are distinguished.

Guided acoustic waves at the intersection of interfaces and surfaces.

In numerical calculations, guided acoustic waves, localized in two spatial dimensions, have been shown to exist and their properties have been investigated in three different geometries, (i) a half-space consisting of two elastic media with a planar interface inclined to the common surface, (ii) a wedge made of two elastic media with a planar interface, and (iii) the free edge of an elastic layer between two quarter-spaces or two wedge-shaped pieces of a material with elastic properties and density differing from those of the intermediate layer. For the special case of Poisson media forming systems (i) and (ii), the existence ranges of these 1D guided waves in parameter space have been determined and found to strongly depend on the inclination angle between surface and interface in case (i) and the wedge angle in case (ii). In a system of type (ii) made of two materials with strong acoustic mismatch and in systems of type (iii), leaky waves have been found with a high degree of spatial localization of the associated displacements, although the two materials constituting these structures are isotropic.

Influence of electrical boundary conditions on profiles of acoustic field and electric potential of shear-horizontal acoustic waves in potassium niobate plates.

The profiles of an acoustic field and electric potential of the forward and backward shear-horizontal (SH) acoustic waves of a higher order propagating in X-Y potassium niobate plate have been theoretically investigated. It has been shown that by changing electrical boundary conditions on a surface of piezoelectric plates, it is possible to change the distributions of an acoustic field and electric potential of the forward and backward acoustic waves. The dependencies of the distribution of a mechanical displacement and electrical potential over the plate thickness for electrically open and electrically shorted plates have been plotted.

Unusual energy properties of leaky backward Lamb waves in a submerged plate.

It is found that leaky backward Lamb waves, i.e. waves with negative energy-flux velocity, propagating in a plate submerged in a liquid possess extraordinary energy properties distinguishing them from any other type of waves in isotropic media.