Anoxic Treatment of Agricultural Drainage Water in a Venturi-Integrated Membrane Bioreactor.

Due to low sludge production and being a clean source without residuals, hydrogen-based autotrophic denitrification appears to be a promising choice for nitrate removal from agricultural drainage waters or water/wastewater with a similar composition. Although the incorporation of hydrogen-based autotrophic denitrification with membrane bioreactors (MBRs) enabled almost 100% utilization of hydrogen, the technology still needs to be improved to better utilize its advantages. This study investigated the anoxic treatment of both synthetic and real drainage waters using hydrogen gas in a recently developed membrane bioreactor configuration, a venturi-integrated submerged membrane bioreactor, for the first time.

Modelling of hydrogenotrophic denitrification process in a venturi-integrated membrane bioreactor.

The aim of this study is to model a hydrogenotrophic denitrification process in a venturi-integrated submerged membrane bioreactor (MBR) system. The MBR was operated in batch mode using feed concentrations of 100 and 150 mg NO-N/L. In contrast to most of the denitrification process models that represent the mixed culture with one composite biomass parameter, the biomass was subdivided into two main categories in this modelling study: mainly nitrate-reducing biomass and mainly nitrite-reducing biomass.

A venturi device reduces membrane fouling in a submerged membrane bioreactor.

In this study, for the first time, a venturi device was integrated into a submerged membrane bioreactor (MBR) to improve membrane surface cleaning and bioreactor oxygenation. The performances of a blower and the venturi device were compared in terms of membrane fouling and bioreactor oxygenation. Upon comparing membrane fouling, the performances were similar for a low operation flux (18 L/m(2).

A new approach for chemical oxygen demand (COD) measurement at high salinity and low organic matter samples.

Background, Aim, And Scope: Chemical oxygen demand (COD) is used as a discharge standard parameter in wastewater treatment plant design, environmental modelling and many other applications. Chloride interference is an important problem of COD measurement for wastewaters containing low organic matter and high chloride concentrations. In case of chloride concentrations up to 2,000 mg/L, mercury sulphate addition at a ratio of 10:1 (HgSO(4):Cl(-)) can adequately mask the interference.