Optical Response of PDMS Surface Diffraction Gratings under Exposure to Volatile Organic Compounds.

Monitoring volatile organic compounds (VOCs) in indoor air is significantly gaining importance due to their adverse effects on human health. Among the diverse detection methods is optical sensing, which employs materials sensitive to the presence of gases in the environment. In this work, we investigate polydimethylsiloxane (PDMS), one of the materials utilized for gas sensing, in a novel transducer: a surface relief diffraction grating.

[A comparative assessment of microbiocenosis of saliva and oropharynx in patients with migraine].

Objective: To identify changes in the microbiome of saliva and to compare it with the microbiome of the oropharynx of patients with migraine.

Material And Methods: Sixty patients with migraine (21-56 years old), were examined using a headache diary, MIDAS and VAS. A microbiological examination of saliva and smear from the mucosa of the posterior wall of the oropharynx with evaluation by the method of mass spectrometry of microbial markers (MSMM) with the determination of 57 microorganisms was performed.

Holographic Recording of Unslanted Volume Transmission Gratings in Acrylamide/Propargyl Acrylate Hydrogel Layers: Towards Nucleic Acids Biosensing.

The role of volume hydrogel holographic gratings as optical transducers in sensor devices for point-of-care applications is increasing due to their ability to be functionalized for achieving enhanced selectivity. The first step in the development of these transducers is the optimization of the holographic recording process. The optimization aims at achieving gratings with reproducible diffraction efficiency, which remains stable after reiterative washings, typically required when working with analytes of a biological nature or several step tests.

Color-Changing Reflection Hologram for Quality Assurance of Therapeutic Ultrasound Systems.

The acoustic output of clinical therapeutic ultrasound equipment requires regular quality assurance (QA) testing to ensure the safety and efficacy of the treatment and that any potentially harmful deviations from the expected output power density are detected as soon as possible. A hologram, consisting of a reflection grating fabricated in an acrylate photopolymer film, has been developed to produce an immediate, visible, and permanent change in the color of the reconstructed hologram from red to green in response to incident ultrasound energy. The influence of the therapeutic ultrasound insonation parameters (exposure time, ultrasound power density, and proximity to the point of maximum acoustic pressure) on the hologram's response has been investigated for two types of therapeutic ultrasound systems: a sonoporation system and an ultrasound physiotherapy system.

The Development of Optomechanical Sensors-Integrating Diffractive Optical Structures for Enhanced Sensitivity.

The term optomechanical sensors describes devices based on coupling the optical and mechanical sensing principles. The presence of a target analyte leads to a mechanical change, which, in turn, determines an alteration in the light propagation. Having higher sensitivity in comparison with the individual technologies upon which they are based, the optomechanical devices are used in biosensing, humidity, temperature, and gases detection.

Utilization Perspectives of Lignin Biochar from Industrial Biomass Residue.

The present study aimed at utilizing technically hydrolyzed lignin (THL), industrial biomass residue, derived in high-temperature diluted sulfuric acid hydrolysis of softwood and hardwood chips to sugars. The THL was carbonized in a horizontal tube furnace at atmospheric pressure, in inert atmosphere and at three different temperatures (500, 600, and 700 °C). Biochar chemical composition was investigated along with its HHV, thermal stability (thermogravimetric analysis), and textural properties.

A Magnetic Nanoparticle-Doped Photopolymer for Holographic Recording.

Functionalised holograms are important for applications utilising smart diffractive optical elements for light redirection, shaping and in the development of sensors/indicators. This paper reports on holographic recording in novel magnetic nanocomposites and the observed temperature change in dry layers and liquid samples exposed to alternating magnetic field (AMF). The nanocomposite consists of N-isopropylacrylamide (NIPA)-based polymer doped with magnetic nanoparticles (MNPs), and local heating is achieved through magnetic induction.

Cantilever-Based Sensor Utilizing a Diffractive Optical Element with High Sensitivity to Relative Humidity.

High-sensitivity and simple, low-cost readout are desirable features for sensors independent of the application area. Micro-cantilever sensors use the deflection induced by the analyte presence to achieve high-sensitivity but possess complex electronic readouts. Current holographic sensors probe the analyte presence by measuring changes in their optical properties, have a simpler low-cost readout, but their sensitivity can be further improved.

Birefringent optofluidic gratings.

A set of parallel microfluidic channels behaving as a diffraction grating operating in the Raman-Nath regime has been fabricated and studied. The diffraction efficiency of such structure can be tuned by selecting a liquid with a particular refractive index and/or optical anisotropy. Alternatively the optical properties of the liquid can be characterised by measuring the diffraction efficiency and the state of polarization of the diffracted beam.

Stacked volume holographic gratings for extending the operational wavelength range in LED and solar applications.

A novel stacking procedure is presented for volume phase holographic gratings (VPHGs) recorded in photopolymer material using Corning Willow Glass as a flexible substrate in order to achieve broader angular and spectral selectivity in a diffractive device with high efficiency for solar and LED applications. For the first time to our knowledge, we have shown a device designed for use with a white LED that has the same input and output angles and high efficiency when illuminated by different wavelengths. In this paper, two VPHGs were designed, experimentally recorded, and tested when illuminated at normal incidence.

Study of the Effect of Methyldiethanolamine Initiator on the Recording Properties of Acrylamide Based Photopolymer.

The use of Holographic Optical Elements (HOEs) in applications, such as in light shaping and redirection, requires certain characteristics such as a high Diffraction Efficiency, low angular selectivity and stability against UV damage. In order to maximize the performance of the HOEs, photosensitive materials are needed that have been optimised for the characteristics that are of particular importance in that application. At the core of the performance of these devices is the refractive index modulation created during holographic recording.

Polyvinyl alcohol cryogel based vessel mimicking material for modelling the progression of atherosclerosis.

Purpose: The stiffness of Polyvinyl-alcohol cryogel can be adjusted through application of consecutive freeze-thaw cycles. This material has potential applications in the production of tissue mimicking phantoms in diagnostic ultrasound. The aim of this study was to use PVA-c to produce a range of geometrically and acoustically identical vessel phantoms modelling stages of atherosclerosis which could be verified through mechanical testing, thus allowing for more precision in quantitative in-vitro flow analysis of atherosclerosis.

Investigation of the assessment of low degree (<50%) renal artery stenosis based on velocity flow profile analysis using Doppler ultrasound: An in-vitro study.

Purpose: Renal arterial stenosis can lead to disrupted renal function due to reduced blood flow to the kidneys and is largely thought to be caused by atherosclerosis. Current diagnostic strategies for renal arterial stenosis rely on detecting large degree stenoses (>50%). This study aimed to test the viability of using Doppler ultrasound to assess velocity profiles to detect the presence of low degree (<50%) stenoses.

Modified Surface Relief Layer Created by Holographic Lithography: Application to Selective Sodium and Potassium Sensing.

Point-of-care diagnostics will rely upon the development of low-cost, noncomplex, and easily integrated systems in order to examine biological samples such as blood and urine obtained from the patient. The development of metal ion sensors is a subject of significant relevance for physiological samples. The level of different blood electrolytes, mainly H⁺, Na⁺, K⁺ and Cl is considerably used to monitor irregular physiologies.

Serialized holography for brand protection and authentication.

The problems presented by counterfeit products and documentation are discussed. Limitations of existing holograms for anti-counterfeit applications are described. We describe the advantages of full holographic serialization and the requirements in terms of materials and techniques for mass production of true serialized holograms.

Self-processing photopolymer materials for versatile design and fabrication of holographic sensors and interactive holograms.

The aim of this paper is to discuss the benefits as well as the limitations of utilizing photopolymer materials in the design of holograms that are responsive to changes in their environment, such as changes in the concentration of a specific substance, temperature, and pressure. Three different case studies are presented, including both surface and volume phase holograms, in order to demonstrate the flexibility in the approach of utilizing holographic photopolymers for the design of sensors and interactive optical devices. First, a functionalized surface relief hologram is demonstrated to operate as an optical sensor for the detection of metal ions in water.

Development of a photopolymer holographic lens for collimation of light from a green light-emitting diode.

A holographic optical element (HOE) was developed to collimate a monochromatic light-emitting diode (LED). The fabrication was achieved by the interference of collimated and diverging beams from a 532 nm laser to produce the required photonic structure in a self-developing photopolymer material. The experimental values of diffraction efficiency and spatial period across the HOE were compared with their expected theoretical values.

Holographic beam-shaping diffractive diffusers fabricated by using controlled laser speckle.

A method for fabricating diffractive holographic optical diffusers is reported, allowing a high degree of control of the resulting diffuser characteristics. The method consists of recording a laser speckle pattern using a single carrier beam, with controlled speckle size and shape, in an acrylamide-based volume photopolymer. The multiple interferences that create the speckle pattern form the hologram.

Theoretical modeling and design of photonic structures in zeolite nanocomposites for gas sensing. Part II: volume gratings.

The suitability of holographic structures fabricated in zeolite nanoparticle-polymer composite materials for gas sensing applications has been investigated. Theoretical modeling of the sensor response (i.e.

Theoretical modeling and design of photonic structures in zeolite nanocomposites for gas sensing. Part I: surface relief gratings.

The suitability of holographic structures fabricated in zeolite nanoparticle-polymer composite materials for gas sensing applications has been investigated. Theoretical modeling of the sensor response (i.e.

N-isopropylacrylamide-based photopolymer for holographic recording of thermosensitive transmission and reflection gratings.

In recent years, functionalized photopolymer systems capable of holographic recording are in great demand due to their potential use in the development of holographic sensors. This work presents a newly developed N-isopropylacrylamide (NIPA)-based photopolymer for holographic recording in reflection and transmission modes. The optimized composition of the material is found to reach refractive index modulation of up to 5×10 and 1.

Application of phase shifting electronic speckle pattern interferometry in studies of photoinduced shrinkage of photopolymer layers.

Photoinduced shrinkage occurring in photopolymer layers during holographic recording was determined by phase shifting electronic speckle pattern interferometry. Phase maps were calculated from the changes in intensity at each pixel due to the phase differences introduced between object and reference beams. Shrinkage was then obtained from the changes in phase as recording proceeded.