New Insights into ZIF-90 Synthesis.

Zeolitic imidazolate frameworks (ZIFs) are traditionally synthesized using N, N-dimethylformamide (DMF). However, DMF is toxic and hazardous to human health and the environment, hence other alternative solvents need to be considered. Herein, three different solvents like methanol, water and acetone were used to replace DMF and to explore the syntheses of ZIF-90 using a conventional and a microwave-assisted solvothermal method to obtain hydrothermally stable products, which also exhibit an increased water uptake.

Utilisation of waste Cu-, Mn- and Fe-loaded zeolites generated after wastewater treatment as catalysts for air treatment.

Disposal of copper, manganese and iron is particularly problematic in wastewater of metallurgical and galvanization plants, the electronics industry and agriculture. On the other hand, volatile organic compounds (VOCs), emitted from industrial processes, transportation and consumer products are the main class of air pollutants. The study revealed the potential of waste metal-loaded zeolite, generated through wastewater treatment procedures, to be utilised as an effective VOC removal catalyst for air treatment.

Zeolite Nanocrystals Embedded in Microcellular Carbon Foam as a High-Performance CO Capture Adsorbent with Energy-Saving Regeneration Properties.

Here, the facile synthesis of four-length-scaled (ultramicro-micro-meso-macroporous) hierarchically structured porous carbon nanocomposite by an emulsion-template strategy is reported. This previously unreported combination of zeolite nanocrystals embedded in the walls of microcellular carbon foams gives unique textural and structural properties, which result in their excellent ability to selectively capture CO owing to the presence of ultra-micropores. The zeolite-microcellular carbon foam synergism delivers an adsorbent with a significantly enhanced CO capture capacity of up to 5 mmol g , CO /N selectivity of up to 80, and an outstanding multi-cycle capture performance under humid conditions (70 % performance retention after 30 regeneration cycles).

Synthesis and Catalytic Performance of Hierarchically Porous MIL-100(Fe)@polyHIPE Hybrid Membranes.

Metal-organic frameworks (MOFs) nanoparticles in combination with a nonionic surfactant (Pluronic L-121) are used to stabilize dicyclopentadiene (DCPD)-in-water high internal phase emulsions (HIPEs). The resulting HIPEs containing the MIL-100(Fe) nanoparticles (MIL: Materials of Institut Lavoisier) at the interface between the oil- and the water-phases are then cured, and 100 μm thick, fully open, hierarchically porous hybrid membranes are obtained. The properties of the MIL-100(Fe)@pDCPD polyHIPE membranes are characterized and it is found that up to 14 wt% of the MIL-100(Fe) nanoparticles are incorporated in the hybrid material resulting in an increase of the microporosity up to 130 m(2) g(-1).

A new layered Ca-succinate coordination polymer.

A new layered Ca-succinate coordination polymer, poly[μ(3)-succinato-calcium(II)], [Ca(C(4)H(5)O(4))](n), was synthesized by reaction of CaCl(2)·2H(2)O and succinic acid in an aqueous medium under hydrothermal microwave conditions. The structure contains infinite layers of edge-sharing calcium pentagonal-bipyramidal polyhedra forming six-membered rings connected through succinate ligands. Such an assembly of inorganic building units is unique for calcium metal-organic framework-type structures.

MnO(x) nanoparticles supported on a new mesostructured silicate with textural porosity.

A two-step synthesis of a novel mesostructured silicate, KIL-2, and its manganese-containing analogue, Mn/KIL-2, has been developed. KIL-2 possesses interparticle mesopores with pore dimensions between 5 and 60 nm and a surface area of 448 m(2). The mesopores are formed by the aggregation of silica nanoparticles, which creates a network with interparticle voids.

Atomic force microscopy study of the molecular sieve MnAPO-50.

Atomic force microscopy (AFM) imaging of MnAPO-50 reveals multiply-nucleated, elliptical terraces, oriented in registry with the facet edges with step heights ranging from one to six template repeat distances on the [100] facets and terraces with step heights ranging from one to thirty three times the c unit cell parameter on the [001] facets.

[The DNA test in the diagnosis of Huntington disease].

Huntington's disease is the most prominent basal ganglion disease. Huntington's gene, IT15, in chromosome 4p16.3, has 67 axons with 10,366 bp coding space and unstable CAG sequence that codes glutamine on 5' terminal.