Theoretical and Experimental Studies of Molecular Interactions between Engineered Graphene and Phosphate Ions for Graphene-Based Phosphate Sensing.

Fundamental understanding of the interactions of nanoscale materials with molecules of interest is essential for the development of electronic devices, such as sensors. In particular, structures and molecular interaction properties of engineered graphenes are still largely unexplored, despite these materials' great potential to be used as molecular sensors. As an example of end user application, the detection of phosphorus in the form of phosphate in a soil environment is important for soil fertility and plant growth.

Synthesis and Spectroscopic Characterization of Selected Water-Soluble Ligands Based on 1,10-Phenanthroline Core.

Water-soluble ligands based on a 1,10-phenanthroline core are relatively poorly studied compounds. Developing efficient and convenient syntheses of them would result in new interesting applications because of the importance of 1,10-phenanthrolines. In this manuscript, we describe novel and practical ways to introduce a carboxyl and, for the first time, a phenol and dithiocarboxyl group under mild reaction conditions.

PdCu nanoalloy decorated photocatalysts for efficient and selective oxidative coupling of methane in flow reactors.

Methane activation by photocatalysis is one of the promising sustainable technologies for chemical synthesis. However, the current efficiency and stability of the process are moderate. Herein, a PdCu nanoalloy (~2.

Highly selective oxidation of benzene to phenol with air at room temperature promoted by water.

Phenol is one of the most important fine chemical intermediates in the synthesis of plastics and drugs with a market size of ca. $30b and the commercial production is via a two-step selective oxidation of benzene, requiring high energy input (high temperature and high pressure) in the presence of a corrosive acidic medium, and causing serious environmental issues. Here we present a four-phase interface strategy with well-designed Pd@Cu nanoarchitecture decorated TiO as a catalyst in a suspension system.

Atomic-scale modelling of organic matter in soil: adsorption of organic molecules and biopolymers on the hydroxylated α-AlO (0001) surface.

Binding of organic molecules on oxide mineral surfaces is a key process which impacts the fertility and stability of soils. Aluminium oxide and hydroxide minerals are known to strongly bind organic matter. To understand the nature and strength of sorption of organic carbon in soil, we investigated the binding of small organic molecules and larger polysaccharide biomolecules on α-AlO (corundum).

Modelling the strength of mineral-organic binding: organic molecules on the α-AlO(0001) surface.

Organic carbon (OC) is an essential component of soil. Sorption of OC to oxide mineral surfaces is a key process in soil preservation due to its ability to protect OC from microbial degradation. To understand the sorption of OC in soils and obtain a quantitative description of the binding of organic molecules to soil minerals, we investigated the binding of water and small organic molecules, typical building blocks of OC, on α-AlO, a common soil mineral.

Computational design of graphitic carbon nitride photocatalysts for water splitting.

A series of structures based on graphitic carbon nitride (g-CN), a layered material composed of linked carbon-nitrogen heterocycles arranged in a plane, were investigated by density functional theory calculations. g-CN is a semiconductor that absorbs UV light and visible light at the blue end of the visible spectrum, and is widely studied as a photocatalyst for water splitting; however, its photocatalytic efficiency is limited by its poor light-harvesting ability and low charge mobilities. Modifications to the g-CN structure could greatly improve its optical and electronic properties and its photocatalytic efficiency.

Quantifying the Ultraslow Desorption Kinetics of 2,6-Naphthalenedicarboxylic Acid Monolayers at Liquid-Solid Interfaces.

Kinetic effects in monolayer self-assembly at liquid-solid interfaces are not well explored but can provide unique insights. We use variable-temperature scanning tunneling microscopy (STM) to quantify the desorption kinetics of 2,6-naphthalenedicarboxylic acid (NDA) monolayers at nonanoic acid-graphite interfaces. Quantitative tracking of the decline of molecular coverages by STM between 57.

Origin of Charge Trapping in TiO/Reduced Graphene Oxide Photocatalytic Composites: Insights from Theory.

Composites of titanium dioxide (TiO) and reduced graphene oxide (RGO) have proven to be much more effective photocatalysts than TiO alone. However, little attention has been paid so far to the chemical structure of TiO/RGO interfaces and to the role that the unavoidable residual oxygen functional groups of RGO play in the photocatalytic mechanism. In this work, we develop models of TiO rutile (110)/RGO interfaces by including a variety of oxygen functional groups known to be present in RGO.

Competitive Metal Coordination of Hexaaminotriphenylene on Cu(111) by Intrinsic Copper Versus Extrinsic Nickel Adatoms.

The interplay between the self-assembly and surface chemistry of 2,3,6,7,10,11-hexaaminotriphenylene (HATP) on Cu(111) was complementarily studied by high-resolution scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS) under ultra-high vacuum conditions. To shed light on the competitive metal coordination, comparative experiments were carried out on pristine and nickel-covered Cu(111). Directly after room-temperature deposition of HATP onto pristine Cu(111), self-assembled aggregates were observed by STM, and XPS results indicated still protonated amino groups.

Remote functionalization in surface-assisted dehalogenation by conformational mechanics: organometallic self-assembly of 3,3',5,5'-tetrabromo-2,2',4,4',6,6'-hexafluorobiphenyl on Ag(111).

Even though the surface-assisted dehalogenative coupling constitutes the most abundant protocol in on-surface synthesis, its full potential will only become visible if selectivity issues with polybrominated precursors are comprehensively understood, opening new venues for both organometallic self-assembly and on-surface polymerization. Using the 3,3',5,5'-tetrabromo-2,2',4,4',6,6'-hexafluorobiphenyl (Br4F6BP) at Ag(111), we demonstrate a remote site-selective functionalization at room temperature and a marked temperature difference in double- vs. quadruple activation, both phenomena caused by conformational mechanical effects of the precursor-surface ensemble.

What can be inferred from moiré patterns? A case study of trimesic acid monolayers on graphite.

Self-assembly of benzene-1,3,5-tricarboxylic acid (trimesic acid - TMA) monolayers at the alkanoic acid-graphite interface is revisited. Even though this archetypal model system for hydrogen bonded porous networks is particularly well studied, the analysis of routinely observed superperiodic contrast modulations known as moiré patterns lags significantly behind. Fundamental questions remain unanswered such as, are moiré periodicity and orientation always the same, i.

From Au-Thiolate Chains to Thioether Sierpiński Triangles: The Versatile Surface Chemistry of 1,3,5-Tris(4-mercaptophenyl)benzene on Au(111).

Self-assembly of 1,3,5-tris(4-mercaptophenyl)benzene (TMB), a 3-fold symmetric, thiol-functionalized aromatic molecule, was studied on Au(111) with the aim of realizing extended Au-thiolate-linked molecular architectures. The focus lay on resolving thermally activated structural and chemical changes by a combination of microscopy and spectroscopy. Thus, scanning tunneling microscopy (STM) provided submolecularly resolved structural information, while the chemical state of sulfur was assessed by X-ray photoelectron spectroscopy (XPS).

Continuum and atomistic description of excess electrons in TiO2.

The modelling of an excess electron in a semiconductor in a prototypical dye sensitised solar cell is carried out using two complementary approaches: atomistic simulation of the TiO2 nanoparticle surface is complemented by a dielectric continuum model of the solvent-semiconductor interface. The two methods are employed to characterise the bound (excitonic) states formed by the interaction of the electron in the semiconductor with a positive charge opposite the interface. Density-functional theory (DFT) calculations show that the excess electron in TiO2 in the presence of a counterion is not fully localised but extends laterally over a large region, larger than system sizes accessible to DFT calculations.

Nanopatterning of a covalent organic framework host-guest system.

We have used a boroxine-based COF as a template for C60-fullerene self-assembly on graphite. Local removal of the COF by STM based nanomanipulation creates nanocorrals that may host other species.

Adsorption studies of p-aminobenzoic acid on the anatase TiO₂(101) surface.

The adsorption of p-aminobenzoic acid (pABA) on the anatase TiO2(101) surface has been investigated using synchrotron radiation photoelectron spectroscopy, near edge X-ray absorption fine structure (NEXAFS) spectroscopy, and density functional theory (DFT). Photoelectron spectroscopy indicates that the molecule is adsorbed in a bidentate mode through the carboxyl group following deprotonation. NEXAFS spectroscopy and DFT calculations of the adsorption structures indicate the ordering of a monolayer of the amino acid on the surface with the plane of the ring in an almost upright orientation.

Nanoscale electrical investigation of layer-by-layer grown molecular wires.

Nanoscopic metal-molecule-metal junctions consisting of Fe-bis(terpyridine)-based ordered nanostructures are grown in layer-by-layer fashion on a solid support. Hopping is demonstrated as the main charge-transport mechanism both experimentally and theoretically.

Born-Haber cycle for monolayer self-assembly at the liquid-solid interface: assessing the enthalpic driving force.

The driving force for self-assembly is the associated gain in free energy with decisive contributions from both enthalpy and entropy differences between final and initial state. For monolayer self-assembly at the liquid-solid interface, solute molecules are initially dissolved in the liquid phase and then become incorporated into an adsorbed monolayer. In this work, we present an adapted Born-Haber cycle for obtaining precise enthalpy values for self-assembly at the liquid-solid interface, a key ingredient for a profound thermodynamic understanding of this process.