Impact of Denture Use on Oral Health-Related Quality of Life in Yemeni Patients: A Cross-Sectional Analysis.

BACKGROUND We used the 14-item Oral Health Impact Profile-14 (OHIP-14) questionnaire to evaluate the association between sociodemographic variables and oral health-related quality of life in 241 wearers of removable partial or complete dentures attending a single center in Yemen. MATERIAL AND METHODS A total of 241 partial dentures (PD) and complete dentures (CD) wearers were enrolled from the Department of Prosthodontics at the Faculty of Dentistry, Sana'a University, and the University of Science and Technology. Data were collected before the commencement of denture wearing and after 3-6 months of denture use.

Radiographic Assessment of 121 Glass Fiber Post Procedures in 32 Patients Aged 21-60 Years Performed by 6th-Year Dental Students During the 2022-2023 Academic Year at the College of Dentistry, Jazan University, Saudi Arabia.

BACKGROUND The restoration of endodontically treated teeth (ETT) and severely damaged teeth has been a concern of clinicians. Glass Fiber Post (GFPs) combine the strength of carbon fiber posts with the esthetic appearance of glass to resemble natural dentin during dental restoration procedures. This radiographical study assessed the GFP carried out by students enrolled in the Clinical Comprehensive Course at the College of Dentistry, Jazan University.

Comparative Analysis of Properties in Chairside Silicone Denture Liners versus Heat-Cured Molloplast-B: An In-Depth In Vitro Evaluation.

BACKGROUND We investigated the bond strength, tensile strength, and water absorption properties of 4 widely used chairside silicone long-term denture soft lining materials and compared properties with those of heat-cured silicone material. MATERIAL AND METHODS Four chairside materials (GC Reline Soft, Mucopren Soft, Sofreliner Soft, and Elite Soft Relining) and a heat-cured silicone material (Molloplast B) were investigated. For tensile and shear bond strength and tensile strength, samples were prepared according to the manufacturers' instructions and the testing machine used.

Comparative Evaluation of Hardness and Energy Absorption of Some Commercially Available Chairside Silicone-Based Soft Denture Liners and a Heat-Cured Soft Denture Liner.

Aim: To investigate the hardness and energy absorption of four commercially available chairside types of silicone materials and compare their properties with heat-cured silicone material.

Materials: The chairside materials investigated were GC reline soft, mucopren soft, sofreliner soft and elite soft relining. The heat-cured polymer silicone material was Molloplast B.

Unlocking Endocrown Restoration Expertise Among Dentists: Insights from a Multi-Center Cross-Sectional Study.

BACKGROUND This study, employing an online questionnaire, aimed to assess and contrast the awareness, knowledge, and perceptions of dentists in Saudi Arabia (SA) regarding endocrowns (EC) as post-endodontic restorations with those of dentists educated in various other countries. MATERIAL AND METHODS We conducted a cross-sectional survey among dental interns and practicing dentists in government facilities, private dental centers, and dental colleges in SA, including participants of diverse nationalities. We disseminated validated, closed-ended questionnaires through WhatsApp via Google Forms.

Dimensional Stability of Light-Activated Urethane Dimethacrylate Denture Base Resins.

An accurate and dimensionally stable trial denture base is required for a successful denture. The aim of this in vitro study was to assess the dimensional stability of a light-activated urethane dimethacrylate (UDMA) visible light cure (VLC) denture base with three fabrication techniques and different curing cycles. Forty-five VLC denture base samples were divided evenly into three groups.

Physical, Optical, and Mechanical Properties of Ceramic Materials after Coffee Immersion and Evaluation of Cleaning Impact with Different Oral Hygiene Tools.

This study aimed to evaluate the effect of three oral hygiene tools, a regular toothbrush, an electronic toothbrush, and mouthwash, on the color stability of three different computer-aided design (CAD) and computer-aided manufactured (CAM) ceramic blocks. Feldspathic ceramic (Vita Triluxe Forte), hybrid resin ceramic (Vita Enamic), and lithium disilicate glass-ceramic (IPS e.max CAD) were used in this study.

Osseo-densification versus conventional surgical technique in low density jaw bone: A split mouth in vivo study.

Background: The success of dental implants depend on implant design, surgical technique, bone density, implant morphology and postoperative care. Initial stability is utmost importance and is of concern in low density bone. The osseo-densification strategy enhance primary stability by raising density of the osteotomy site walls by non-subtractive drilling, unlike conventional technique.

Assessment of Color Stainability of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) Ceramic Materials After Hot and Cold Coffee Immersion at Different Time Intervals.

BACKGROUND This spectrophotometric study assessed the color stability of CAD/CAM restorative materials with different exposed surfaces following staining by hot Arabic Qahwa and cold coffee. MATERIAL AND METHODS Ninety-six specimens were fabricated from 3 different CAD/CAM ceramic materials: Vita Suprinity (Vita-S), Vita Enamic (Vita-E), and Vitablocs Mark II (Vitablocs-MII). We divided 32 specimens for each group into glazed or polished surfaces, with 16 specimens in each group, then subdivided them according to staining materials: Arabic Qahwa and Frappuccino Cold Coffee.

Surface roughness and color measurements of glazed or polished hybrid, feldspathic, and Zirconia CAD/CAM restorative materials after hot and cold coffee immersion.

Background: The purpose of this study evaluates and compares the effect of surface roughness (Ra) and color stability on computer-aided design/computer-aided manufacturing (CAD/CAM) hybrid resin (Vita Enamic), feldspathic (Vitablocs® Mark II), and lithium disilicate Zirconia (Vita Suprinity) glazed or polished ceramics immersed in hot Arabic Qahwa and cold coffee.

Methods: A total of 96 standardized samples were prepared from CAD/CAM restorative materials. Half of the samples were polished as per the manufacturer's instructions using a porcelain polishing kit, and the other half were glazed.

Dental Anxiety and Fear among Patients in Jazan, Kingdom of Saudi Arabia: A Cross-sectional Study.

Aim: The current study aims to address the patient's dental anxiety (DA) And dental fear (DF) under the treatment of a general practitioner (GP) among different parameters.

Materials And Methods: The cross-sectional study included 500 patients recruited from different clinics in Jazan, Saudi Arabia. Data were collected through a questionnaire-based form consisting of three parts; the first part was personal and demographic questions whereas the second and third parts were a modified dental anxiety scale (MDAS) and a dental fear survey (DFS) to measure DA and DF among patients.

Clinical analysis of CAD-CAM milled and printed complete dentures using computerized occlusal force analyser.

Background: Digital complete dentures (CDs) by computer-aided designing and computer-aided manufacturing (CAD-CAM) techniques (milling and three-dimensional (3-D) printing) have been evaluated clinically and provided satisfactory results. But clinical studies assessing occlusal forces by digital dentures are lacking.

Objectives: To compare the occlusal force parameters in complete dentures (CDs) fabricated by milling, 3-D printing and conventional techniques having 3 commonly used occlusal schemes, using computerized occlusal force analysis system (Tech-Scan III- T-Scan III).

Computerized occlusal forces analysis in complete dentures fabricated by additive and subtractive techniques.

Background: Fabrication of complete dentures by computer-aided designing and computer-aided manufacturing (CAD-CAM) techniques are now common. Subtractive and Additive are the two principal CAD-CAM techniques used for this purpose. However, studies that evaluated the occlusal forces by CDs manufactured by these techniques are lacking.

Effects of Khat on Surface Roughness and Color of Feldspathic and Zirconia Porcelain Materials under Simulated Oral Cavity Conditions.

Khat chewing is considered as a daily habit that is practiced by more than five million people globally. The effect of khat chewing on the surface roughness and the color stability of natural teeth and the material used in the fabrication of dental prosthesis remains unknown. This study was conducted to explore and compare the effect of khat homogenate (KH) on the surface roughness (Ra) and the average color changes (Δ*) amongst natural teeth and selected shades from different porcelain types, namely, feldspathic metal ceramic (MC) VM13, computer-aided design/computer assisted manufacture (CAD/CAM) feldspathic (Vitablocs Mark II), and multilayer zirconia (Ceramill Zolid PS) porcelains.

Influence of the Coca-Cola Drinks on the Overall Color of Glazed or Polished Porcelain Veneers Fabricated from Different Materials and Thicknesses: An Study.

Aim: The aim of the current study is to assess the influence of Coca-Cola drinks on the overall color of glazed or polished porcelain veneers fabricated of three different porcelain systems and two different thicknesses.

Materials And Methods: A total of 96 ceramic disk specimens were fabricated. The ceramic veneers were prepared to a standardized thickness of 1.

Oral Biofilm on Dental Materials Among Khat Chewers.

Background: Nowadays khat chewing habit is increasing among population in southern part of Saudi Arabia, Jazan and till date there is no literature investigating the effect of khat on oral biofilm on dental materials.

Objective: To evaluate and compare the bacterial biofilm on different types of dental restorative materials used in replacing missing tooth structures among khat chewers and non-khat chewers.

Materials And Methods: Hundred and twenty biofilm samples were collected from different dental restorations, such as All-ceramic (AL), Metal Ceramic (MC), Metal crowns or bridges (M), Composite (C), Glass Ionomer (GI) and Amalgam (A) restorations in non-khat and khat chewers (K).

Khat Chewing Induces a Floral Shift in Dental Material-Associated Microbiota: A Preliminary Study.

BACKGROUND The habit of khat (Catha Edulis Forskal) chewing is widely practiced in the southern regions of Saudi Arabia, Yemen, and East Africa. This social habit has tremendous effects on oral and general health of khat chewers. Khat may affect bacterial species in plaque biofilms on oral rehabilitation materials.

Prosthetic Rehabilitation using a Telescopic Crown constructed with Computer-assisted Design and Computer-assisted Manufacturing: A Case Report with a 2-year Follow-up.

This case report describes a 74-year-old female patient whose teeth were rehabilitated using telescopic crowns (TCs) on abutments and fixed dental prostheses (FDPs) in the maxillary arch with the aid of computer-assisted design and computer-assisted manufacturing (CAD/CAM) technology. The mandibular arch was restored using casted removable dental prostheses (RDPs) and surveyed crowns. The treatment sequences were followed as recommended in the dental literature.

A multidisciplinary approach in the treatment of tempromandibular joint pain associated with qat chewing.

Pain of the tempro-mandibular joint (TMJ) has a direct bearing to missing teeth and excessive physical activity. Consumption of qat requires chewing on the leaves to extract their juice for long hours. A 65-year-old male Yemeni patient, a Qat chewer, reported to the university dental hospital at King Khalid University complaining of pain in left temporomandibular joint with missing mandibular anterior teeth.