Risk-Based Approach for Defining Retest Dates for Active Pharmaceutical Ingredients and Excipients.

Drug substances and excipients must be stored in recommended storage conditions and should comply with their specifications during the retest period for their use in the manufacture of drug products. The ICH (International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use) and WHO (World Health Organization) regulatory guidelines mandate that after the retest period, the drug substances must be retested for compliance with the specification and then used immediately in the manufacture of the finished product. Although these substances can be retested multiple times, an emphasis is placed on immediate use following a retest and compliance with standards.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Fexofenadine.

In this monograph, the potential use of methods based on the Biopharmaceutics Classification System (BCS) framework to evaluate the bioequivalence of solid immediate-release (IR) oral dosage forms containing fexofenadine hydrochloride as a substitute for a pharmacokinetic study in human volunteers is investigated. We assessed the solubility, permeability, dissolution, pharmacokinetics, pharmacodynamics, therapeutic index, bioavailability, drug-excipient interaction, and other properties using BCS recommendations from the ICH, FDA and EMA. The findings unequivocally support fexofenadine's classification to BCS Class IV as it is neither highly soluble nor highly permeable.

Nitroso Impurities in Drug Products: An Overview of Risk Assessment, Regulatory Milieu, and Control Strategy.

Many nitrosamines have been recognized to be carcinogenic for many decades. Despite the fact that several nitrosamine precursors are frequently used in the manufacturing of pharmaceutical products, their potential presence in pharmaceutical products has previously been overlooked due to a lack of understanding on how they form during the manufacturing process. From the risk assessment, it is clear that nitrosamines or their precursors may be present in any component of the finished dosage form.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Levocetirizine Dihydrochloride.

Levocetirizine, a histamine H1-receptor antagonist, is prescribed to treat uncomplicated skin rashes associated with chronic idiopathic urticaria as well as the symptoms of both seasonal and continual allergic rhinitis. In this monograph, the practicality of using Biopharmaceutics Classification System (BCS) based methodologies as a substitute for pharmacokinetic studies in human volunteers to appraise the bioequivalence of immediate-release (IR) oral, solid dosage forms containing levocetirizine dihydrochloride was investigated, using data from the literature and in-house testing. Levocetirizine's solubility and permeability properties, as well as its dissolution from commercial products, its therapeutic uses, therapeutic index, pharmacokinetics and pharmacodynamic traits, were reviewed in accordance with the BCS, along with any reports in the literature about failure to meet bioequivalence (BE) requirements, bioavailability issues, drug-excipient interactions as well as other relevant information.

Data integrity issues in pharmaceutical industry: Common observations, challenges and mitigations strategies.

Data integrity (DI) reaffirms the pharmaceutical industry's commitment to manufacture drugs that are safe, effective and fulfil quality standards. At the same time, DI is a crucial tool for regulatory authorities to use in protecting public health. Recent FDA Form-483 observations and warning letters indicate that DI is the main issue the pharmaceutical industry is currently dealing with.

Hyperpigmentation: Looking beyond hydroquinone.

Hyperpigmentation is the most common complaint in the age group 40-45 years, seeking consultation for skin disorders. Hydroquinone is a commonly used depigmenting agent in clinical practice for treating hyperpigmentation. Prolonged use of hydroquinone has been associated with cancer risk and exogenous ochronosis.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Sitagliptin Phosphate Monohydrate.

Sitagliptin is an antihyperglycemic drug used in adults for the treatment of diabetes Type 2. Literature data and in-house experiments were applied in this monograph to assess whether methods based on the Biopharmaceutics Classification System (BCS) could be used to assess the bioequivalence of solid immediate-release (IR) oral dosage forms containing sitagliptin phosphate monohydrate, as an alternative to a pharmacokinetic study in human volunteers. The solubility and permeability characteristics of sitagliptin were reviewed according to the BCS, along with dissolution, therapeutic index, therapeutic applications, pharmacokinetics, pharmacodynamic characteristics, reports of bioequivalence (BE) / bioavailability problems, data on interactions between the drug and excipients and other data germane to the subject.

Converging Generic Drug Product Development: Bioequivalence Design and Reference Product Selection.

Different regulatory agencies provide criteria for selecting a reference product for bioequivalence (BE) studies. In most cases, the criteria vary from one regulatory agency to another, and, consequently, the generic companies often have to repeat the BE studies comparing the same test product with the reference product purchased from a particular country. In addition to being a cost-intensive exercise, this practice is also unethical.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Moxifloxacin Hydrochloride.

In this monograph, literature data is reviewed to evaluate the feasibility of waiving in vivo bioequivalence testing and instead applying the Biopharmaceutics Classification System (BCS) based methods to the approval of immediate-release solid oral dosage forms containing moxifloxacin hydrochloride as the sole active pharmaceutical ingredient. To facilitate the feasibility decision, solubility and permeability and dissolution characteristics in the context of the BCS, therapeutic index, therapeutic use, pharmacokinetic parameters, bioequivalence/bioavailability issues, drug-excipient interactions and other relevant data were taken into consideration. Moxifloxacin is a BCS class I drug with a wide therapeutic index.

Selective laser sintering 3D printing - an overview of the technology and pharmaceutical applications.

Food and Drug Administration (FDA) has approved a drug product (Spritam®) and many medical devices manufactured by three-dimensional printing (3DP) processes for human use. There is immense potential to print personalized medicines using 3DP. Many 3DP methods have been reported in the literature for pharmaceutical applications.

Integrating QbD Tools for Flexible Scale-Up Batch Size Selection for Solid Dosage Forms.

The pilot scale batch size for solid oral dosage forms is currently defined by major regulatory agencies as one-tenth of the full production, or 100,000 units, whichever is larger. The current criterion is arbitrary and is not based on scientific and risk assessment principles. The approach does not consider geometric, kinematic, and dynamic changes that come into play on scale-up.

Lesson Learnt from Recall of Valsartan and Other Angiotensin II Receptor Blocker Drugs Containing NDMA and NDEA Impurities.

The presence of N-nitrosodimethylamine (NDMA) and N-nitrosodiethylamine (NDEA) impurities in angiotensin II receptor blocker (ARB) drugs containing tetrazole ring has triggered worldwide product recalls. The purpose of this article is to identify the potential gap area in current pharmaceutical industry practice that might have led to the NMDA and NDEA impurities escaping the drug manufacturer's and FDA's attention. The impact of process change was not adequately assessed by the manufacturer of contaminated APIs (active pharmaceutical ingredients), and potential for generation of mutagenic or other toxic impurities was not considered.

Additive Manufacturing with 3D Printing: Progress from Bench to Bedside.

Three-dimensional (3D) printing was discovered in the 1980s, and many industries have embraced it, but the pharmaceutical industry is slow or reluctant to adopt it. Spiritam® is the first and only 3D-printed drug product approved by FDA in 2015. Since then, the FDA has not approved any 3D-printed drug product due to technical and regulatory issues.

Is the demonstration of bioequivalence for clavulanic acid required in amoxicillin-clavulanic acid orally administered immediate-release products?

Objectives: Bioequivalence (BE) criteria for amoxicillin-clavulanic acid (Co-amoxiclav) oral formulations are based on 90% confidence interval for both amoxicillin and clavulanic acid. The aim of this work is to explore the relevance of demonstrating BE of clavulanic acid in Co-amoxiclav oral formulations and also to assess the impact on safety and efficacy of product due to bioinequivalent clavulanic acid.

Methods And Key Findings: The subtherapeutic levels of clavulanic acid would continue to exert their action against β-lactamases due to postβ-lactamase inhibitor effect.

Sample Size for Tablet Compression and Capsule Filling Events During Process Validation.

During solid dosage form manufacturing, the uniformity of dosage units (UDU) is ensured by testing samples at 2 stages, that is, blend stage and tablet compression or capsule/powder filling stage. The aim of this work is to propose a sample size selection approach based on quality risk management principles for process performance qualification (PPQ) and continued process verification (CPV) stages by linking UDU to potential formulation and process risk factors. Bayes success run theorem appeared to be the most appropriate approach among various methods considered in this work for computing sample size for PPQ.

Integrating biopharmaceutics risk assessment and in vivo absorption model in formulation development of BCS class I drug using the QbD approach.

Objective: Clinically relevant critical quality attributes (CQA's) were identified for the development of generic drug products containing fluconazole and potential design spaces relevant to the clinical application of the drug candidate was explored.

Significance: A simplified scoring system for the biopharmaceutics risk assessment roadmap (BioRAM) is proposed to guide product development.

Methods: Factorial design of experiments was employed to study the effect of formulation and process variables on CQA's.

Pharmaceutical product development: A quality by design approach.

The application of quality by design (QbD) in pharmaceutical product development is now a thrust area for the regulatory authorities and the pharmaceutical industry. International Conference on Harmonization and United States Food and Drug Administration (USFDA) emphasized the principles and applications of QbD in pharmaceutical development in their guidance for the industry. QbD attributes are addressed in question-based review, developed by USFDA for chemistry, manufacturing, and controls section of abbreviated new drug applications.

Exploratory Investigation of the Limiting Steps of Oral Absorption of Fluconazole and Ketoconazole in Children Using an In Silico Pediatric Absorption Model.

Due to the higher total clearance of certain drugs in children than in adults, it is recommended that, in such cases, higher relative doses on a milligram/kilogram basis should be administered to children in order to achieve similar systemic exposure to adults. This is the case for fluconazole and ketoconazole. Even though the lower absorptive surface area and smaller volumes of intestinal fluids in children does not affect fluconazole absorption, cumulative fraction absorbed of ketoconazole seems to be dose dependent.

Risk assessment for extending the Biopharmaceutics Classification System-based biowaiver of immediate release dosage forms of fluconazole in adults to the paediatric population.

Objectives: The paediatric population undergoes developmental changes in gastric pH, gastric emptying, intestinal transit time, membrane permeability, protein binding, body water, distribution and metabolism. It is widely recognised that changes in these parameters may result in an alteration of the plasma profile and thus in key bioequivalence parameters such as Cmax (maximum plasma concentration of drug) and area under the plasma concentration vs time profile curve. The aim of this work is to assess the risk of extending the biowaiver for immediate release dosage formulations of fluconazole from the adult to the paediatric population.

Significance of metabolites in bioequivalence: losartan potassium as a case study.

Estimation of metabolite data as a supportive evidence of comparable therapeutic outcome is recommended by various guidance documents. However, a consensus on using it solely to establish bioequivalence (BE) is lacking as parent drug is believed to detect pharmacokinetic differences between test and reference formulations better. Four BE studies of losartan potassium reported in the literature are reviewed.

Comparative binding and disintegrating property of Echinochloa colona starch (difra starch) against maize, sorghum, and cassava starch.

Context: Starch obtained from different botanical sources exhibit different characteristics due to variation in amylase-amylopectin ratio, which results in different binder substrate interactions.

Objective: The present study characterized Echinochloa colona (L.) Link (Poaceae) starch and evaluated its compressional characteristics for use as tablet excipient against commonly used maize, sorghum, and cassava starch.

Pediatric drug development: formulation considerations.

Absence of safe, effective and appropriate treatment is one of the main causes of high mortality and morbidity rates among the pediatric group. This review provides an overview of pharmacokinetic differences between pediatric and adult population and their implications in pharmaceutical development. Different pediatric dosage forms, their merits and demerits are discussed.

Biowaiver monograph for immediate-release solid oral dosage forms: bisoprolol fumarate.

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release (IR) solid oral dosage forms containing bisoprolol as the sole active pharmaceutical ingredient (API) are reviewed. Bisoprolol is classified as a Class I API according to the current Biopharmaceutics Classification System (BCS). In addition to the BCS class, its therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions, and reported BE/bioavailability problems are taken into consideration.

Tulsi oil as a potential penetration enhancer for celecoxib transdermal gel formulations.

The focus of the present study was to develop and evaluate the transdermal system of celecoxib. Transdermal gels composed of carbopol 940 in propylene glycol (PG) containing penetration enhancers. The formulations were characterized by permeation, pharmacokinetics, pharmacodynamics and histopathology.