The development of resin-coating materials for enhancing elemental release of coated glass ionomer cements.

This study aimed to develop resin coatings containing monocalcium phosphate monohydrate (MCPM), Sr/F-doped bioactive glass (Sr/F-BAGs), and pre-reacted glass ionomer fillers (SPG) that enhance ion release without detrimentally affecting the mechanical properties of GIC. The objective of this study was to evaluate the degree of monomer conversion (DC), biaxial flexural strength, surface microhardness, and ion release of the GICs coated with experimental coating materials compared to a commercial product (EQUIA Coat, EC). Four experimental resin coating materials containing 10-20 wt% of MCPM with Sr/F-BAGs and 5-10 wt% SPG were prepared.

Gene expression, micro-CT and histomorphometrical analysis of sinus floor augmentation with biphasic calcium phosphate and deproteinized bovine bone mineral: A randomized controlled clinical trial.

Aims: The aim of this randomized controlled clinical trial was to compare the gene expression, micro-CT, histomorphometrical analysis between biphasic calcium phosphate (BCP) of 70/30 ratio and deproteinized bovine bone mineral (DBBM) in sinus augmentation.

Materials And Methods: Twenty-four patients in need for sinus floor augmentation through lateral approach were randomized into BCP 70/30 ratio or DBBM. After at least 6 months of healing, a total of 24 bone specimens were collected from the entire height of the augmented bone at the area of implant placement and underwent micro-CT, histomorphometric and gene expression analysis.

Calcium phosphate ceramic as a model for enamel substitute material in dental applications.

Objective: This study aimed to develop enamel substitute material using a mechanochemical technique.

Materials And Methods: Hydroxyapatite was synthesized with and without tricalcium phosphate under uniaxial pressing of 10 and 17 MPa (HA10, HA17, BCP10, and BCP17), followed by sintering at 1250 °C for 2 h. Human enamel and dentin blocks were used as control groups.

Assessment of Mechanical/Chemical Properties and Cytotoxicity of Resin-Modified Glass Ionomer Cements Containing Sr/F-Bioactive Glass Nanoparticles and Methacrylate Functionalized Polyacids.

This study prepared low-toxicity, elemental-releasing resin-modified glass ionomer cements (RMGICs). The effect of 2-hydroxyethyl methacrylate (HEMA, 0 or 5 wt%) and Sr/F-bioactive glass nanoparticles (Sr/F-BGNPs, 5 or 10 wt%) on chemical/mechanical properties and cytotoxicity were examined. Commercial RMGIC (Vitrebond, VB) and calcium silicate cement (Theracal LC, TC) were used as comparisons.

Stability of guided bone regeneration with two ratios of biphasic calcium phosphate at implant sites in the esthetic zone: A randomized controlled clinical trial.

Aims: The aim of this randomized, double-blind, clinical trial was to compare the stability of the horizontal dimensions (facial bone thickness) of augmented bone using biphasic calcium phosphate (BCP) with hydroxyapatite/β-tricalcium phosphate ratio of either 60/40 or 70/30.

Materials And Methods: Sixty dental implants placed with contour augmentation in the esthetic zone were randomized to 60/40 BCP (n = 30) or 70/30 BCP (n = 30). Cone-beam computed tomographic was used to assess facial bone thickness post-implantation and 6 months later at implant platform and 2, 4, and 6 mm apical to it.

Influence of Lithium- and Zinc-Containing Bioactive Glasses on Pulpal Regeneration.

Objective:  To evaluate the potential of modified bioactive glasses containing lithium and zinc as pulp capping materials by investigating the odontogenic differentiation and mineralization response in the tooth culture model.

Materials And Methods:  Lithium- and zinc-containing bioactive glasses (45S5.1Li, 45S5.

Novel Epigenetic Modulation Chitosan-Based Scaffold as a Promising Bone Regenerative Material.

Bone tissue engineering is a complicated field requiring concerted participation of cells, scaffolds, and osteoactive molecules to replace damaged bone. This study synthesized a chitosan-based (CS) scaffold incorporated with trichostatin A (TSA), an epigenetic modifier molecule, to achieve promising bone regeneration potential. The scaffolds with various biphasic calcium phosphate (BCP) proportions: 0%, 10%, 20%, and 40% were fabricated.

Monomer Conversion, Dimensional Stability, Biaxial Flexural Strength, Ion Release, and Cytotoxicity of Resin-Modified Glass Ionomer Cements Containing Methacrylate-Functionalized Polyacids and Spherical Pre-Reacted Glass Fillers.

The aim of this study was to prepare RMGICs for pulp protection that contain polyacids functionalized with methacrylate groups (CMs) to enable light-activated polymerization without the need for toxic 2-hydroxyethyl methacrylate (HEMA) monomers. The effects of using CM liquids with 0 or 5 wt% HEMA on the physical/mechanical properties and cytotoxicity of the experimental RMGICs were assessed. Spherical pre-reacted glass fillers (SPG) were used as the powder phase.

Rheological Properties, Surface Microhardness, and Dentin Shear Bond Strength of Resin-Modified Glass Ionomer Cements Containing Methacrylate-Functionalized Polyacids and Spherical Pre-Reacted Glass Fillers.

The aim of this study was to prepare experimental resin-modified glass ionomer cements (RMGICs) containing low levels of hydroxyethyl methacrylate (HEMA) for pulp protection. Liquid and powder phases of the experimental RMGICs were polyacid functionalized with methacrylate groups and spherical pre-reacted glass fillers (SPG). Two types of liquid phase containing 0 wt.

Buffering capacity and antibacterial properties among bioactive glass-containing orthodontic adhesives.

This study was to evaluate the acid-buffering capacity and antibacterial properties of orthodontic adhesives containing bioactive glasses (BAGs) (45S5, 45S5F, S53P4), Hydroxyapatite, beta-tricalcium phosphate, and Canasite. Fillers comprising 15 wt% bioactive glasses, HAp, β-TCP, and Canasite incorporated with 55 wt% silanated glass were added to a mixture of UDMA/TEGDMA. Acid-buffering capacity was tested by exposing disc-shaped samples of each adhesive to medium of bacteria-produced acids, and pH changes were recorded at 24 and 48 h.

Bone regeneration of a polymeric sponge technique-Alloplastic bone substitute materials compared with a commercial synthetic bone material (MBCP+TM technology): A histomorphometric study in porcine skull.

Background: Polymeric sponge technique is recommended for developing the desired porosity of Biphasic calcium phosphate (BCP) which may favor bone regeneration.

Purpose: To investigate the healing of BCP with ratio of HA30/β-TCP70 (HA30) and HA70/β-TCP30 (HA70) polymeric sponge preparation, compare to commercial BCP (MBCP+TM).

Materials And Methods: Materials were tested X-ray diffraction (XRD) pattern and scanning electron microscope (SEM) analysis.

Physical Properties of Glass Ionomer Cement Containing Pre-Reacted Spherical Glass Fillers.

The aim of this study was to assess the effect of different commercial liquid phases (Ketac, Riva, and Fuji IX) and the use of spherical pre-reacted glass (SPG) fillers on cement maturation, fluoride release, compressive (CS) and biaxial flexural strength (BFS) of experimental glass ionomer cements (GICs). The experimental GICs (Ketac_M, Riva_M, FujiIX_M) were prepared by mixing SPG fillers with commercial liquid phases using the powder to liquid mass ratio of 2.5:1.

Development of nanocomposite collagen/ HA/β-TCP scaffolds with tailored gradient porosity and permeability using vitamin E.

The production of the biomimetic scaffolds with well-designed porosity parameters is a critical and challenging factor in biomaterials processing. The porosity parameters (i.e.

The effect of powder to liquid ratio on physical properties and fluoride release of glass ionomer cements containing pre-reacted spherical glass fillers.

The aim was to assess the effect of powder to liquid ratio (PLR) on setting time, fluoride release, and compressive strength of conventional glass ionomer cements (GICs) containing pre-reacted spherical glass fillers (SPG). GICs were prepared by mixing SPG with Fuji IX Universal liquid using PLR of 1:1, 1.5:1, 2:1, 2.

Synthesis and characterization of biomimetic bioceramic nanoparticles with optimized physicochemical properties for bone tissue engineering.

Calcium phosphate bioceramics nanoparticles such as nano-hydroxyapatite (nHA) and nano-tricalcium phosphate (nTCP) are the main focus of basic and applied research for bone tissue regeneration. In particular, a combination of these two phases (nHA + nTCP) which refers to as "nano-biphasic calcium phosphates (nBCP)" is of interest due to the preferred biodegradation nature compared to single-phase bioceramics. However, the available synthesis processes are challenging and the biomaterials properties are yet to be optimized to mimic the physiochemical properties of the natural nanoscale bone apatite.

Antiviral activity of multifunctional composite based on TiO-modified hydroxyapatite.

An antiviral activity of TiO-modified hydroxyapatite composite (HA/TiO) had been investigated. The HA/TiO composite (HA50:Ti50) was prepared by a solid state reaction method followed by calcination at 650 °C for 2 h. Phase formations and morphologies of the obtained HA/TiO composite powders were determined using XRD and SEM.

In vivo biocompatibility and degradation of novel Polycaprolactone-Biphasic Calcium phosphate scaffolds used as a bone substitute.

Background: Biocompatibility and degradation of poly ε-caprolactone (PCL)-Biphasic Calcium Phosphate (BCP) scaffolds fabricated by the "Melt Stretching and Compression Molding (MSCM)" technique were evaluated in rat models.

Objectives: Degradation behaviors and histological biocompatibility of the PCL-20% BCP MSCM scaffolds and compare with those of PCL-20% β-tricalcium phosphate (TCP) scaffolds commercially fabricated by Fused Deposition Modeling (FDM) were evaluated.

Methods: The study groups included Group A: PCL-20% BCP MSCM scaffolds and Group B: PCL-20% TCP FDM scaffolds, which were implanted subcutaneously in twelve male Wistar rats.

Effects of polycaprolactone-biphasic calcium phosphate scaffolds on enhancing growth and differentiation of osteoblasts.

Background: Polycaprolactone (PCL)-biphasic calcium phosphate (BCP) scaffolds fabricated using Melt-Stretching and Compression Molding (MSCM) can release calcium and phosphate ions, which are essential for bone formation.

Objective: Responses of the osteoblasts seeded on three groups of scaffolds including group A; PCL-20% BCP (%wt), group B; PCL-30% BCP and group C (control); pure PCL (100% PCL) were evaluated.

Methods: The cell-scaffold constructs were made by seeding osteoblast cell lines at 1×105 cells/scaffold.

Properties of poly(lactic acid)/hydroxyapatite composite through the use of epoxy functional compatibilizers for biomedical application.

A composite of 70/30 poly(lactic acid)/hydroxyapatite was systematically prepared using various amounts of glycidyl methacrylate as reactive compatibilizer or Joncryl ADR®-4368 containing nine glycidyl methacrylate functions as a chain extension/branching agent to improve the mechanical and biological properties for suitable usage as internal bone fixation devices. The effect of glycidyl methacrylate/Joncryl on mechanical properties of poly(lactic acid)/hydroxyapatite was investigated through flexural strength. Cell proliferation and differentiation of osteoblast-like MC3T3-E1 cells cultured on the composite samples were determined by Alamar Blue assay and alkaline phosphatase expression, respectively.

Physical characteristics and biocompatibility of the polycaprolactone-biphasic calcium phosphate scaffolds fabricated using the modified melt stretching and multilayer deposition.

Physical properties and biocompatibility of polycaprolactone (PCL)-biphasic calcium phosphate (BCP) scaffolds fabricated by the modified melt stretching and multilayer deposition (mMSMD) technique were evaluated in vitro. The PCL-BCP scaffold specimens included group A; PCL: BCP (wt%) = 80:20 and group B; 70:30. Mechanical properties of the scaffolds were assessed using a universal testing machine.

Bone Regeneration Potential of Biphasic Nanocalcium Phosphate with High Hydroxyapatite/Tricalcium Phosphate Ratios in Rabbit Calvarial Defects.

Purpose: This study aimed to evaluate the effect of biphasic calcium phosphate (BCP) with high hydroxyapatite/tricalcium phosphate (HA/TCP) ratios on bone formation in rabbit calvarial defects.

Materials And Methods: Sixteen New Zealand white rabbits were randomly divided into two groups, a control group and an experimental group. In each animal, bilateral circular defects (10-mm diameter) were created on the calvarium.

Improving shear bond strength between feldspathic porcelain and zirconia substructure with lithium disilicate glass-ceramic liner.

This study investigated the shear bond strength (SBS) between veneering porcelain and zirconia substructure using lithium disilicate glass-ceramic as a liner. The mineral phases and microstructures of lithium disilicate glass-ceramic at temperature range of 800-900°C were preliminarily investigated. SBSs of porcelain-veneered zirconia specimens with and without lithium disilicate glassceramic liner fired at the same temperature were determined.

In vitro biocompatibility analysis of novel nano-biphasic calcium phosphate scaffolds in different composition ratios.

This study aimed to evaluate in vitro biocompatibility of a composite of nanoscale biphasic calcium phosphate (BCP) and collagen (C) compared to pure BCP (P) in different composition ratios of nanohydroxyapatite to nano-β-tricalcium phosphate (HA/β-TCP). Each study group comprised of three ratios of BCP (30/70, 40/60, and 50/50). For evaluation of cellular response toward each ratio, mouse osteoblast (MC3T3-E1) cell line was cultivated on the scaffolds for 19 days.

Fabrication and characterization of novel nano hydroxyapatite/β-tricalcium phosphate scaffolds in three different composition ratios.

The biphasic calcium phosphate (BCP) concept was introduced to overcome disadvantages of single phase biomaterials. Different composition ratios of BCP bioceramics have been studied, yet controversies regarding the effects of ratio on biomaterial behavior still exist. In this study, BCP scaffolds were prepared from nano hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) that were synthesized via a solid state reaction.