Interfacial Charge Transfer in Dye-Sensitized Solar Cells Using SCN-Free Terpyridine-Coordinated Ru Complex Dye and Co Complex Redox Couples.

The efficiency of dye-sensitized solar cells (DSSCs) using Ru complex dyes and Co complex redox couples has been increased with a strategy to prevent charge recombination via the addition of bulky or lengthy peripheral units to the dyes. However, despite the efforts, most of the DSSCs are still suffering from nonunity quantum efficiency and fast recombination. We examine the effect of SCN ligand, which has been used for many Ru complex dyes and could attract positively charged Co complexes.

Molecular engineering of zinc phthalocyanine sensitizers for efficient dye-sensitized solar cells.

Asymmetric zinc phthalocyanines with alkyl chain substituents formed highly efficient light-harvesting layers on a TiO2 surface. Dye-sensitized solar cells using PcS20 exhibited a record efficiency of 6.4% under one-sun irradiation.

Molecular design rule of phthalocyanine dyes for highly efficient near-IR performance in dye-sensitized solar cells.

A series of zinc-phthalocyanine sensitizers (PcS16-18) with different adsorption sites have been designed and synthesized in order to investigate the dependence of adsorption-site structures on the solar-cell performances in zinc-phthalocyanine based dye-sensitized solar cells. The change of adsorption site affected the electron injection efficiency from the photoexcited dye into the nanocrystalline TiO2 semiconductor, as monitored by picosecond time-resolved fluorescence spectroscopy. The zinc-phthalocyanine sensitizer PcS18, possessing one carboxylic acid directly attached to the ZnPc ring and six 2,6-diisopropylphenoxy units, showed a record power conversion efficiency value of 5.

Improvement of TiO2/dye/electrolyte interface conditions by positional change of alkyl chains in modified panchromatic Ru complex dyes.

A series of panchromatic ruthenium sensitizers (MJ sensitizers) with attached thiophene and phenyl units bearing alkyl chains was synthesized. A new synthetic route was used to examine all possible positions for the alkyl chains. The absorption spectra showed the sum of a ruthenium complex and peripheral organic chromophore units.

Solid-state dye-sensitized solar cells fabricated by coupling photoelectrochemically deposited poly(3,4-ethylenedioxythiophene) (PEDOT) with silver-paint on cathode.

A PEDOT-based dye-sensitized solar cell (DSC) is successfully improved by coupling photoelectrochemically deposited PEDOT layer with an Ag paste-paint on the cathode. With a 9.3 μm thick mesoscopic nanocrystalline TiO(2) film, a maximum cell performance of 3.

Synthesis and characterization of ZnO and ZnO:Ga films and their application in dye-sensitized solar cells.

Highly crystalline ZnO and Ga-modified zinc oxide (ZnO:Ga) nanoparticles containing 1, 3 and 5 atom% of Ga3+ were prepared by precipitation method at low temperature. The films were characterized by XRD, BET, XPS and SEM. No evidence of zinc gallate formation (ZnGa2O4), even in the samples containing 5 atom% of gallium, was detected by XRD.

Influence of doped anions on poly(3,4-ethylenedioxythiophene) as hole conductors for iodine-free solid-state dye-sensitized solar cells.

Poly(3,4-ethylenedioxythiophene) (PEDOT) is an excellent hole-conducting polymer able to replace the liquid I(-)/I3(-) redox electrolyte in dye-sensitized solar cells (DSCs). In this work we applied the in situ photoelectropolymerization technique to synthesize PEDOT and carried out a careful analysis of the effect of different doping anions on overall solar cell performance. The anions analyzed in this work are ClO4(-), CF3SO3(-), BF4(-), and TFSI(-).

Dye-sensitized TiO2 solar cells using imidazolium-type ionic liquid crystal systems as effective electrolytes.

A novel ionic liquid crystal (ILC) system (C(12)MImI/I(2)) with a smectic A phase used as an electrolyte for a dye-sensitized solar cell (DSSC) showed the higher short-circuit current density (J(SC)) and the higher light-to-electricity conversion efficiency than the system using the non-liquid crystalline ionic liquid (C(11)MImI/I(2)), due to the higher conductivity of ILC. To investigate charge transport properties of the electrolytes in detail, the exchange reaction-based diffusion coefficients (D(ex)) were evaluated. The larger D(ex) value of ILC supported that the higher conductivity of ILC is attributed to the enhancement of the exchange reaction between iodide species.

Sputtered Nb2O5 as an effective blocking layer at conducting glass and TiO2 interfaces in ionic liquid-based dye-sensitized solar cells.

The thin Nb(2)O(5) layer works as a remarkable blocking layer when deposited by the rf magnetron sputtering method between fluorine-doped tin oxide and a mesoporous TiO(2) layer, improving open-circuit photovoltage (V(oc)) and fill factor (FF) with power conversion efficiency over 5.5% at 1 sun irradiation of the dye-sensitized TiO(2) solar cells using ionic liquid electrolytes.

Electron transport analysis for improvement of solid-state dye-sensitized solar cells using poly(3,4-ethylenedioxythiophene) as hole conductors.

Dye-sensitized solar cells (DSCs) using solid-state hole conductor, poly(3,4-ethylenedioxythiophene) (PEDOT), were fabricated using in-situ photoelectrochemical polymerization giving short-circuit photocurrent density of 3.20 mA cm-2, open-circuit voltage of 0.77 V, and fill factor of 0.

Deposition of a thin film of TiOx from a titanium metal target as novel blocking layers at conducting glass/TiO2 interfaces in ionic liquid mesoscopic TiO2 dye-sensitized solar cells.

In dye-sensitized TiO2 solar cells, charge recombination processes at interfaces between fluorine-doped tin oxide (FTO), TiO2, dye, and electrolyte play an important role in limiting the photon-to-electron conversion efficiency. From this point of view, a high work function material such as titanium deposited by sputtering on FTO has been investigated as an effective blocking layer for preventing electron leakage from FTO without influencing electron injection. X-ray photoelectron spectroscopy analysis indicates that different species of Ti (Ti4+, Ti3+, Ti2+, and a small amount of Ti0) exist on FTO.

A novel ruthenium sensitizer with a hydrophobic 2-thiophen-2-yl-vinyl-conjugated bipyridyl ligand for effective dye sensitized TiO2 solar cells.

A hydrophobic and 2-thiophen-2-yl-vinyl-conjugated ruthenium complex, cis-Ru(dhtbpy)(dcbpy)(NCS)2 [dhtbpy = 4,4'-di(hexylthienylvinyl)-2,2'-bipyridyl; dcbpy = 4,4'-dicarboxy-2,2'-bipyridyl], was newly designed, synthesized and applied successfully to sensitization of nanocrystalline TiO2-based solar cells, giving a conversion efficiency of 9.5% under irradiation with AM 1.5 solar light.

Dye-sensitized TiO2 nanotube solar cells: fabrication and electronic characterization.

TiO2 nanotubes (TNTs) with large aspect ratio and large specific surface area were prepared from P25 (Nippon Aerosil) and applied to dye-sensitized titanium dioxide solar cells (DSSCs). Optimization of fabrication conditions, i.e.