Kinetic study on the degradation of Acid Red 88 azo dye in a constructed wetland-microbial fuel cell inoculated with Shewanella oneidensis MR-1.

Removal of Acid Red 88 (AR88) as an azo dye from the synthetic type of wastewater was studied in a laboratory-made constructed wetland microbial fuel cell (CW-MFC) inoculated with Shewanella oneidensis MR-1 (SOMR-1). Plant cultivation was implemented using a typical CW plant known as Cyperus alternifolius. The complexity of the SOMR-1 cell membrane having different carriers of electrons and H ions gives the microbe special enzymatic ability to participate in the AR88 oxidation link to the O reduction.

Evaluation of enhanced chemical coagulation method for a case study on colloidal liquid particle in wastewater treatment: Statistical optimization analysis and implementation of machine learning.

Coal mines are one of the largest sources of energy supply and generate significant volumes of wastewater. Chemical coagulation is one of the most effective methods for wastewater treatment. In this research, ferric and aluminum-based coagulants, along with polyacrylamide flocculants with positive, negative, and neutral charges, were utilized in chemical coagulation.

Comparison of acid and hydrothermal pretreatments of date waste for value creation.

The production of date syrup yields a substantial amount of date press cake (DPC), fibrous and moisturising material with great potential for generating value through bioprocessing. However, the recalcitrant structure of DPC affects the yield of products in bioprocesses. To boost the accessibility of the structure as well as increase the soluble fraction of carbohydrates and facilitate further enzymatic hydrolysis, hydrothermal and dilute acid (0.

Lipids productivity of cyanobacterium Anabaena vaginicola in an internally illuminated photobioreactor using LED bar lights.

Concerns over environmental issues exists and desire to decrease of their extent, have directed efforts toward green energy production. Growth behavior of Anabaena vaginicola was determined in a photobioreator which illuminated internally (IIPBR) using LED bar light. Excessive heat generated in the IIPBR was taken care of by applying a novel air-cooled system.

Electrochemical-based processes for produced water and oily wastewater treatment: A review.

The greatest volume of by-products produced in oil and gas recovery operations is referred to as produced water and increasing environmental concerns and strict legislations on discharging it into the environment cause to more attention for focusing on degradation methods for treatment of produced water especially electrochemical technologies. This article provides an overview of electrochemical technologies for treating oily wastewater and produced water, including: electro-coagulation, electro-Fenton, electrochemical oxidation and electrochemical membrane reactor as a single stage and combination of these technologies as multi-stage treatment process. Many researchers have carried out experiments to examine the impact of various factors such as material (i.

Comparison of high-concentration azo dye removal by long HRT in MSBRs' bioaugmented with GAC and sponge media.

The present study assessed the performance and fouling of adding granular activated carbon (GAC) and sponge (BioCube), as two different media, to a membrane sequencing batch reactor (MSBR) system in wastewater treatment containing Acid Red 18 (AR 18). Anaerobic phase, aerobic phase, and hydraulic retention times (HRTs) of 24 h, 12 h, and 72 h were considered for 500 mg/L AR 18 removal at a sludge retention time (SRT) of 20 days by separately adding up to 35% BioCube volume and 8 g/L GAC to the reactors. Based on the kinetic study, 63 mg/L (87% removal) and 115 mg/L (77% removal) remaining dye were reported in the GAC and BioCube membrane sequencing batch reactors (GAC-MSBR and BioCube-MSBR), respectively.

Influence of salinity on heavy metal and oil removal from hypersaline oilfield-produced water by electrocoagulation: mechanistic insights.

The focus of the present study was to explore how and to what extent ultrahigh salinity affects the adsorption of cadmium and hydrocarbon pollutants onto aluminum hydroxide adsorbents formed in an electrocoagulation process. The changes in the nature and structure of the electro-generated aluminum particles and the possible removal mechanisms due to high salt content were investigated by using FE-SEM/EDS, FTIR, BET, and XRD analyses. The pseudo-second order and Freundlich models proved to fit the data for cadmium adsorption onto the aluminum hydroxides best.

The effect of temperature and styrene concentration on biogas production and degradation characteristics during anaerobic removal of styrene from wastewater.

In the current study, styrene was removed anaerobically from wastewaters at temperatures of 35 ℃, 25 ℃, and 15 ℃ and concentration range of 20-150 ppm in the presence of ethanol as a co-substrate and co-solvent. Maximum styrene removal of 93% was achieved at 35 ℃. The volatilization of styrene was negligible at about 2% at all experimented temperatures.

Photocatalytic degradation of 2,4-DNT in simulated wastewater by magnetic CoFeO/SiO/TiO nanoparticles.

Discharge of 2,4-dinitrotoluene (2,4-DNT) into the environment leads to a serious soil and water sources pollution problem, due to toxicity and possible carcinogenicity of this toxic substance. In this work, the photocatalytic degradation of 2,4-DNT was investigated using CoFeO/SiO/TiO nanoparticles. The catalyst features were characterized by using XRD, TEM, EDX, UV-vis DRS, FTIR, and VSM techniques.

Date fruit processing waste and approaches to its valorization: A review.

In the Middle East and North Africa, dates are a traditional and economically valuable crop, playing an essential role in people's daily diets. Date fruit production and related processing industry generate a large quantity of waste; for illustration, the date juicing industry produces roughly 17-28% Date press cake (DPC), which is mainly discarded in open lands and drains. Considering the generation volume and the nutrient content of DPC, this organic by-product stream can be valorized through the production of a wide range of products with a great market appeal, such as volatile fatty acids, activated carbon, organic acids, etc.

Quantifying the organic content of saline wastewaters: Is chemical oxygen demand always an achievable parameter?

The study presented in this paper takes a comprehensive approach to the measurement of the COD of saline industrial wastewaters taking into account both their widely varying salinity levels and the substantial interference of chloride with the conventional method of COD measurement. To this end, three approaches for combating the chloride interference associated with the measurement of COD using the conventional method were considered. The dilution of saline samples prior to analysis yielded reasonably accurate COD results as long as the COD after dilution was 40 mg L or above.

An ultrasonic method for the synthesis, control and optimization of CdS/TiO core-shell nanocomposites.

In this study, an ultrasonic method was utilized in combination with microemulsion to synthesize CdS/TiO core-shell nanoparticles and control their particle size and ultimately optimize the influential parameters. Moreover, response surface methodology (RSM) was used to optimize the thickness of the shell. Herein, four parameters, temperature (67-79 °C), synthesis retention time (45-105 min), TiO : CdS ratio (1.

Combination of novel coalescing oil water separator and electrocoagulation technique for treatment of petroleum compound contaminated groundwater.

In the present study a combination of a novel coalescing oil water separator (COWS) and electrocoagulation (EC) technique was used for treatment of petroleum product contaminated groundwater. In the first phase, COWS was used as the primary treatment. Two different types of coalescing media and two levels of flow rates were examined in order to find the optimum conditions.

Sequential anaerobic-aerobic biological treatment of colored wastewaters: case study of a textile dyeing factory wastewater.

In the present study the feasibility of the use of a bacterial batch sequential anaerobic-aerobic process, in which activated sludge was used in both parts of the process, for pretreatment of wastewater generated by a textile dyeing factory has been considered. Activated sludge used in the process was obtained from a municipal wastewater treatment plant and adapted to real dyeing wastewater using either an anaerobic-only or an anaerobic-aerobic process over a period of 90 days. The use of activated sludge adapted using the anaerobic-aerobic process resulted in a higher overall decolorization efficiency compared to that achieved with activated sludge adapted using the anaerobic-only cycles.

Optimization of photocatalytic degradation of real textile dye house wastewater by response surface methodology.

This study evaluates the advanced oxidation process for decolorization of real textile dyeing wastewater containing azo and disperse dye by TiO and UV radiation. Among effective parameters on the photocatalytic process, effects of three operational parameters (TiO concentration, initial pH and aeration flow rate) were examined with response surface methodology. The F-value (136.