Determination of standard molar volume of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide on titanium dioxide surface.

The fluids near the solid substrate display different properties compared to the bulk fluids owing to the asymmetric interaction between the fluid and substrate; however, to the best of our knowledge, no work has been conducted to determine the interfacial properties of fluids experimentally. In this work, we combined a pycnometer with experimental measurements and data processing to determine the standard thermodynamic properties of interfacial fluids for the first time. In the study, 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Hmim][NTf]) and titanium dioxide (P25) were chosen as the probes to prove the concept.

Enhanced CO Capture through SAPO-34 Impregnated with Ionic Liquid.

The concurrent utilization of an adsorbent and absorbent for carbon dioxide (CO) adsorption with synergistic effects presents a promising technique for CO capture. Here, 1-butyl-3-methylimidazole acetate ([Bmim][Ac]), with a high affinity for CO, and the molecular sieve SAPO-34 were selected. The impregnation method was used to composite the hybrid samples of [Bmim][Ac]/SAPO-34, and the pore structure and surface property of prepared samples were characterized.

β-Asarone Protects PC12 Cells Against Hypoxia-Induced Injury Via Negatively Regulating RPPH1/MiR-542-3p/DEDD2 Axis.

Hypoxic injury to the brain is very intricate under the control of biochemical reactions induced by various factors and mechanisms. Long non-coding RNAs (lncRNAs) have already been revealed to affect pathological processes in the nervous system of different degrees. This research aimed to investigate the mechanisms implicated in hypoxic brain injury.

Flow induced adherens junction remodeling driven by cytoskeletal forces.

Adherens junctions (AJs) are a key structural component for tissue organization and function. Under fluid shear stress, AJs exhibit dynamic assembly/disassembly, but how shear stress couples to AJs is unclear. In MDCK cells we measured simultaneously the forces in cytoskeletal α-actinin and the density and length of AJs using a genetically coded optical force sensor, actinin-sstFRET, and fluorescently labeled E-cadherin (E-cad).

Intracellular forces during guided cell growth on micropatterns using FRET measurement.

Interaction of cells with extracellular matrix (ECM) regulates cell shape, differentiation and polarity. This effect has been widely observed in cells grown on substrates with various patterned features, stiffness and surface chemistry. It has been postulated that mechanical confinement of cells by the substrate causes a redistribution of tension in cytoskeletal proteins resulting in cytoskeletal reorganization through force sensitive pathways.

Direct observation of α-actinin tension and recruitment at focal adhesions during contact growth.

Adherent cells interact with extracellular matrix via cell-substrate contacts at focal adhesions. The dynamic assembly and disassembly of focal adhesions enables cell attachment, migration and growth. While the influence of mechanical forces on the formation and growth of focal adhesions has been widely observed, the force loading on specific proteins at focal adhesion complex is not clear.

Interplay between cytoskeletal stresses and cell adaptation under chronic flow.

Using stress sensitive FRET sensors we have measured cytoskeletal stresses in α-actinin and the associated reorganization of the actin cytoskeleton in cells subjected to chronic shear stress. We show that long-term shear stress reduces the average actinin stress and this effect is reversible with removal of flow. The flow-induced changes in cytoskeletal stresses are found to be dynamic, involving a transient decrease in stress (phase-I), a short-term increase (3-6 min) (Phase-II), followed by a longer-term decrease that reaches a minimum in ~20 min (Phase-III), before saturating.

Assay for molecular transport across gap junction channels in one-dimensional cell arrays.

Transport across gap junction channels (GJCs) between neighboring cells is critical to synchronizing cell's electrical and metabolic activities and maintaining cell homeostasis. Here we present a non-invasive microfluidic method to measure molecular diffusion across GJCs in multiple 1D cell arrays in real time. Using the chip, selective loading of a membrane permeant fluorescence dye (carboxyfluorescein) in Normal Rat Kidney (NRK) cells shows that the dye was able to diffuse through three cells along single cell chains in ∼35 minutes.

Microfluidic devices for characterizing the agonist of formyl peptide receptor in RBL-FPR cells.

The human formyl peptide receptor (FPR) plays an important role in inflammation and immunity. Finding of specific agonists and antagonists of FPR may provide potential therapeutic agents for FPR related disorders. The binding of agonist by FPR induces a cascade of G protein-mediated signaling events leading to neutrophil chemotaxis, intracellualr calcium mobilization, FPR ligand uptake and so on.

Analysis of multiplex PCR fragments with PMMA microchip.

Microchip electrophoresis is a promising technique for analysis of bio-molecules. It has the advantages of fast analysis, high sensitivity, high resolution and low-cost of samples. Plastic chip has the potential of mass production for clinical use for its advantages in biocompatibility and low cost.

Droplet-based microfluidic system for individual Caenorhabditis elegans assay.

A droplet-based microfluidic system integrating a droplet generator and a droplet trap array is described for encapsulating individual Caenorhabditis elegans into a parallel series of droplets, enabling characterization of the worm behavior in response to neurotoxin at single-animal resolution.

Cell-based high content screening using an integrated microfluidic device.

High content screening (HCS) has quickly established itself as a core technique in the early stage of drug discovery for secondary compound screening. It allows several independent cellular parameters to be measured in a single cell or populations of cells in a single assay. In this work, we describe high content screening for the multiparametric measurement of cellular responses in human liver carcinoma (HepG2) cells using an integrated microfluidic device.

Parallel microfluidic networks for studying cellular response to chemical modulation.

A microfluidic chip featuring parallel gradient-generating networks etched on glass plate was designed and fabricated. The dam and weir structures were fabricated to facilitate cell positioning and seeding, respectively. The microchip contains five gradient generators and 30 cell chambers where the resulted concentration gradients of drugs are delivered to stimulate the on-chip cultured cells.

Fabrication of two-weir structure-based packed columns for on-chip solid-phase extraction of DNA.

Microchip-based packed column SPE of DNA was performed using the microfabricated two-weir structure within a microchannel. We developed two methods to fabricate the two-weir structured glass chips: a "two-side etching/alignment" method and a simplified "one-side/two-step etching" method. The former method required a straightforward alignment step, while the latter approach comprised a simplified wet etching process using paraffin wax as the temporary protective layer.

Characterizing doxorubicin-induced apoptosis in HepG2 cells using an integrated microfluidic device.

Apoptosis has now established its importance in numerous areas of biology and is recently receiving great attention as an important topic related to the development of diseases. In this work, an integrated microfluidic device was developed to characterize doxorubicin-induced apoptosis in human hepatocellular carcinoma (HepG2) cells. A continuous concentration gradient of stimulator (doxorubicin) was generated in the upstream network and used to perfuse downstream cultured HepG2 cells.

Integration of nanoporous membranes for sample filtration/preconcentration in microchip electrophoresis.

Microfluidic devices integrating membrane-based sample preparation with electrophoretic separation are demonstrated. These multilayer devices consist of 10 nm pore diameter membranes sandwiched between two layers of PDMS substrates with embedded microchannels. Because of the membrane isolation, material exchange between two fluidic layers can be precisely controlled by applied voltages.

Parallel analysis of biomolecules on a microfabricated capillary array chip.

This paper focused on a self-developed microfluidic array system with microfabricated capillary array electrophoresis (mu-CAE) chip for parallel chip electrophoresis of biomolecules. The microfluidic array layout consists of two common reservoirs coupled to four separation channels connected to sample injection channel on the soda-lime glass substrate. The excitation scheme for distributing a 20 mW laser beam to separation channels in an array is achieved.

Microfluidic devices for the analysis of apoptosis.

Apoptosis is the outcome of a metabolic cascade that results in cell death in a controlled manner. Due to its important role in maintaining balance in organisms, in mechanisms of diseases, and tissue homeostasis, apoptosis is of great interest in the emerging fields of systems biology. Research into cell death regulation and efforts to model apoptosis processes have become powerful drivers for new technologies to acquire ever more comprehensive information from cells and cell populations.

Simultaneous and ultrarapid determination of reactive oxygen species and reduced glutathione in apoptotic leukemia cells by microchip electrophoresis.

A microchip electrophoresis method coupled with laser-induced fluorescence (LIF) detection was established for simultaneous determination of two kinds of intracellular signaling molecules (reactive oxygen species, ROS, and reduced glutathione, GSH) related to apoptosis and oxidative stress. As the probe dihydrorhodamine-123 (DHR-123) can be converted intracellularly by ROS to the fluorescent rhodamine-123 (Rh-123), and the probe naphthalene-2,3-dicarboxaldehyde (NDA) can react quickly with GSH to produce a fluorescent adduct, rapid determination of Rh-123 and GSH was achieved on a glass microchip within 27 s using a 20 mM borate buffer (pH 9.2).