Improved Mechanical Performance in FDM Cellular Frame Structures through Partial Incorporation of Faces.

The utilization of lattice-type cellular architectures has seen a significant increase, owing to their predictable shape and the ability to fabricate templated porous materials through low-cost 3D-printing methods. Frames based on atomic lattice structures such as face-centered cubic (FCC), body-centered cubic (BCC), or simple cubic (SC) have been utilized. In FDM, the mechanical performance has been impeded by stress concentration at the nodes and melt-solidification interfaces arising from layer-by-layer deposition.

Carbon Capture Utilization for Biopolymer Foam Manufacture: Thermal, Mechanical and Acoustic Performance of PCL/PHBV CO Foams.

Biopolymer foams manufactured using CO enables a novel intersection for economic, environmental, and ecological impact but limited CO solubility remains a challenge. PHBV has low solubility in CO while PCL has high CO solubility. In this paper, PCL is used to blend into PBHV.

Low-Cost Reliable Corrosion Sensors Using ZnO-PVDF Nanocomposite Textiles.

Submerged steel pipes are susceptible to corrosion due to long exposure under harsh corrosive conditions. Here, we investigated the reliability and effectiveness of nonwoven zinc(II) oxide-polyvinylidene fluoride (ZnO-PVDF) nanocomposite fiber textiles as an embedded corrosion sensor. An accelerated thermal cyclic method paired to electrochemical impedance spectroscopy (EIS) was used for this purpose.

Bioresorbable Stent to Manage Congenital Heart Defects in Children.

Intravascular stents for pediatric patients that degrade without inhibiting vessel growth remain a clinical challenge. Here, poly(L-lactide) fibers (DH-BDS) at two thicknesses, 250 μm and 300 μm, were assembled into large, pediatric-sized stents (Ø10 - Ø20 mm). Fibers were characterized mechanically and thermally, then stent mechanical properties were compared to metal controls, while mass loss and degradation kinetics modeling estimated total stent degradation time.

Compostable, fully biobased foams using PLA and micro cellulose for zero energy buildings.

Ecological, health and environmental concerns are driving the need for bio-resourced foams for the building industry. In this paper, we examine foams made from polylactic acid (PLA) and micro cellulose fibrils (MCF). To ensure no volatile organic compounds in the foam, supercritical CO (sc-CO) physical foaming of melt mixed systems was conducted.

Embedded Corrosion Sensing with ZnO-PVDF Sensor Textiles.

Corrosion in underground and submerged steel pipes is a global problem. Coatings serve as an impermeable barrier or a sacrificial element to the transport of corrosive fluids. When this barrier fails, corrosion in the metal initiates.

Multi-Fold Enhancement in Compressive Properties of Polystyrene Foam Using Pre-delaminated Stearate Functionalized Layer Double Hydroxides.

Developing an environmentally benign styrene foam is a critical environmental need. Supercritical CO use in foams has proven to be a valuable path. Adding fillers to increase bubble nucleation has been pursued concurrently.

Hybrid boron nitride-natural fiber composites for enhanced thermal conductivity.

Thermal conductivity was dramatically increased after adding natural fiber into hexagonal boron nitride (hBN)/epoxy composites. Although natural fiber does not show high-thermal conductivity itself, this study found that the synergy of natural fiber with hBN could significantly improve thermal conductivity, compared with that solely using hBN. A design of mixtures approach using constant fibers with increasing volume fractions of hBN was examined and compared.

Property enhancement of soy protein isolate-based films by introducing POSS.

To enhance the mechanical and water-resistant properties of soy protein isolate (SPI) based films, hydrophobic TriSilanolPhenyl polyhedral oligomeric silsesquioxanes (POSS) was incorporated to modify the SPI films. POSS has three SiOH groups in a molecular, which is employed to cross-link SPI with the help of 3-glycidoxypropyltrimethoxysilane (GPTMS). POSS is a structure of eight phenol groups, playing a critical role in improving the physical and mechanical properties.

Osteoconductive bio-based meshes based on poly(hydroxybutyrate-co-hydroxyvalerate) and poly(butylene adipate-co-terephthalate) blends.

Poly(butylene adipate-co-terephthalate) (PBAT) and Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) are biopolymers that have the potential to be used in applications of bone healing. In this study, it is hypothesized that the polymer blend has the combined strength and osteoconductivity to support osteoblast collagen formation. PBAT (PBAT 100), and a blend with 20% PHBV (PBAT 80) were extruded in the form of fibers and then knitted in the form of mesh.

Treatment with coated layer double hydroxide clays decreases the toxicity of copper-contaminated water.

Copper is a common pollutant found in watersheds that exerts toxic effects on both invertebrates and vertebrates. Layer double hydroxide (LDH) clays are able to adsorb a wide range of contaminants through ion-exchange mechanisms. Coating LDH clays with various materials alters the aggregation of clay particles into the nano-size range, thus increasing relative surface area and offering great potential for contaminant remediation.

Investigation of the bacterial retting community of kenaf (Hibiscus cannabinus) under different conditions using next-generation semiconductor sequencing.

The microbial communities associated with kenaf (Hibiscus cannabinus) plant fibers during retting were determined in an effort to identify possible means of accelerating this process for industrial scale-up. Microbial communities were identified by semiconductor sequencing of 16S rRNA gene amplicons from DNA harvested from plant-surface associated samples and analyzed using an Ion Torrent PGM. The communities were sampled after 96 h from each of three different conditions, including amendments with pond water, sterilized pond water, or with a mixture of pectinolytic bacterial isolates.