In-plane anisotropic two-dimensional materials for twistronics.

In-plane anisotropic two-dimensional (2D) materials exhibit in-plane orientation-dependent properties. The anisotropic unit cell causes these materials to show lower symmetry but more diverse physical properties than in-plane isotropic 2D materials. In addition, the artificial stacking of in-plane anisotropic 2D materials can generate new phenomena that cannot be achieved in in-plane isotropic 2D materials.

A literature review of bioactive substances for the treatment of periodontitis: , and clinical studies.

Periodontitis is a common chronic inflammatory disease of the supporting tissues of the tooth that involves a complex interaction of microorganisms and various cell lines around the infected site. To prevent and treat this disease, several options are available, such as scaling, root planning, antibiotic treatment, and dental surgeries, depending on the stage of the disease. However, these treatments can have various side effects, including additional inflammatory responses, chronic wounds, and the need for secondary surgery.

Ishophloroglucin A-based multifunctional oxidized alginate/gelatin hydrogel for accelerating wound healing.

This study investigated the potential applicability of wound dressing hydrogels for tissue engineering, focusing on their ability to deliver pharmacological agents and absorb exudates. Specifically, we explored the use of polyphenols, as they have shown promise as bioactive and cross-linking agents in hydrogel fabrication. Ishophloroglucin A (IPA), a polyphenol not previously utilized in tissue engineering, was incorporated as both a drug and cross-linking agent within the hydrogel.

Recent trends in covalent functionalization of 2D materials.

Covalent functionalization of the surface is more crucial in 2D materials than in conventional bulk materials because of their atomic thinness, large surface-to-volume ratio, and uniform surface chemical potential. Because 2D materials are composed of two surfaces with no dangling bond, covalent functionalization enables us to improve or precisely modify the electrical, mechanical, and chemical properties. In this review, we summarize the covalent functionalization methods and related changes in properties.

Antibiotic susceptibility of Bacillus velezensis.

We evaluated the antibiotic minimum inhibitory concentrations (MICs) of 123 Bacillus velezensis strains predominantly isolated from fermented soybean foods from Korea. When the 2018 European Food Safety Authority breakpoint values for Bacillus spp. were applied, all the strains were sensitive to chloramphenicol, clindamycin, erythromycin, gentamicin, kanamycin, tetracycline and vancomycin, and eight strains (6.

Safety and Technological Characterization of and Isolates from Fermented Soybean Foods of Korea.

We evaluated the antibiotic susceptibilities, hemolytic activities, and technological properties of 36 strains and 49 strains predominantly isolated from fermented soybean foods from Korea. Most of the strains were sensitive to chloramphenicol, erythromycin, gentamycin, kanamycin, lincomycin, oxacillin, tetracycline, and trimethoprim. However, 23 strains exhibited potential phenotypic acquired resistance to erythromycin, lincomycin, and tetracycline.

Fabrication and characterization of the 3D-printed polycaprolactone/fish bone extract scaffolds for bone tissue regeneration.

Fish bone extract (FBE) containing a trioligopeptide (FBP-KSA, Lys-Ser-Ala) isolated from Johnius belengerii could induce osteogenic activities on MC3T3-E1 pre-osteoblasts in our previous study. Regarding the osteogenic effect of FBE, in the present study, we fabricated the three-dimensional (3D) interconnected polycaprolactone (PCL)/FBE scaffolds for bone tissue regeneration. After fabrication of PCL scaffolds using 3D printing, FBE was coated on the surface of PCL scaffolds by self-assembly process.

Droplet Impinging Behavior on Surfaces with Wettability Contrasts.

Heterogeneous substrates with moderate and extreme wettability contrasts were fabricated by comprising of superhydrophobic/hydrophilic and superhydrophobic/extremely hydrophilic surfaces, respectively. The interactions of water droplets impinging on the surfaces with sharp wettability contrasts were investigated experimentally. The impinging droplets that slightly touch the hydrophilic or extremely hydrophilic areas on each substrate exhibit a directional rebounding towards the more wetting surfaces, i.

Hydrothermal Growth of ZnO Nanowires on UV-Nanoimprinted Polymer Structures.

Integration of zinc oxide (ZnO) nanowires on miniaturized polymer structures can broaden its application in multi-functional polymer devices by taking advantages of unique physical properties of ZnO nanowires and recent development of polymer microstructures in analytical systems. In this paper, we demonstrate the hydrothermal growth of ZnO nanowires on polymer microstructures fabricated by UV nanoimprinting lithography (NIL) using a polyurethane acrylate (PUA). Since PUA is a siloxane-urethane-acrylate compound containing the alpha-hydroxyl ketone, UV-cured PUA include carboxyl groups, which inhibit and suppress the nucleation and growth of ZnO nanowires on polymer structures.

Fish bone peptide promotes osteogenic differentiation of MC3T3-E1 pre-osteoblasts through upregulation of MAPKs and Smad pathways activated BMP-2 receptor.

Fish bone, a by-product of fishery processing, is composed of protein, calcium, and other minerals. The objective of this study was to investigate the effects of a bioactive peptide isolated from the bone of the marine fish, Johnius belengerii, on the osteoblastic differentiation of MC3T3-E1 pre-osteoblasts. Post consecutive purification by liquid chromatography, a potent osteogenic peptide, composed of 3 amino acids, Lys-Ser-Ala (KSA, MW: 304.

3D nanomolding and fluid mixing in micromixers with micro-patterned microchannel walls.

Microfluidic devices where the microchannel walls were decorated with micro and nanostructures were fabricated using 3D nanomolding. Using 3D molded microfluidic devices with microchannel walls decorated with microscale gratings, the fluid mixing behavior was investigated through experiments and numerical simulation. The use of microscale gratings in the micromixer was predicated by the fact that large obstacles in a microchannel enhances the mixing performance.

Surface modification of droplet polymeric microfluidic devices for the stable and continuous generation of aqueous droplets.

Droplet microfluidics performed in poly(methyl methacrylate) (PMMA) microfluidic devices resulted in significant wall wetting by water droplets formed in a liquid-liquid segmented flow when using a hydrophobic carrier fluid such as perfluorotripropylamine (FC-3283). This wall wetting led to water droplets with nonuniform sizes that were often trapped on the wall surfaces, leading to unstable and poorly controlled liquid-liquid segmented flow. To circumvent this problem, we developed a two-step procedure to hydrophobically modify the surfaces of PMMA and other thermoplastic materials commonly used to make microfluidic devices.

Titer-plate formatted continuous flow thermal reactors: Design and performance of a nanoliter reactor.

Arrays of continuous flow thermal reactors were designed, configured, and fabricated in a 96-device (12 × 8) titer-plate format with overall dimensions of 120 mm × 96 mm, with each reactor confined to a 8 mm × 8 mm footprint. To demonstrate the potential, individual 20-cycle (740 nL) and 25-cycle (990 nL) reactors were used to perform the continuous flow polymerase chain reaction (CFPCR) for amplification of DNA fragments of different lengths. Since thermal isolation of the required temperature zones was essential for optimal biochemical reactions, three finite element models, executed with ANSYS (v.