Quantification of PAHs and chlorinated compounds by novel solid-phase microextraction based on the arrays of tin oxide nanorods.

The results of an innovative study on a new and highly efficient stationary phase based on the SnO2 nanorods coating on fused silica have been reported in this paper. SnO2 nanorods have been grown on fused silica fibers using a hydrothermal process. The extraction properties of the fiber were investigated using headspace solid-phase microextraction (HS-SPME) mode coupled with gas chromatography-mass spectrometry detection for 1,4-dichloro-2-nitrobenzene, biphenyl, and acenaphthene.

Arrays of SnO2 nanorods as novel solid phase microextraction for trace analysis of antidepressant drugs in body fluids.

The arrays of tin oxide nanorods-solid phase microextraction (ATN-SPME) fibre coupled with the high performance liquid chromatography (HPLC) method was developed for simultaneous determination of selective serotonin reuptake inhibitors (SSRI), citalopram and fluoxetine, in human urine and plasma samples. The variables of interest in the Direct-SPME (D-SPME) were extraction time, pH, ion strength or salt percentage and desorption time of analytes from the fibre. These factors were optimised by using a Box-Behnken design and the response surface equations were developed.

Central composite design for the optimization of supercritical carbon dioxide fluid extraction of fatty acids from Borago officinalis L. flower.

Unlabelled: In the present study, fatty acids and essential oils of the flower of borage (Borago officinalis L.) were obtained by supercritical carbon dioxide fluid extraction under different conditions. The extracts obtained were compared to oils of borage flower oil isolated by hydrodistillation.

Comparison of ultrasound-assisted emulsification and dispersive liquid-liquid microextraction methods for the speciation of inorganic selenium in environmental water samples using low density extraction solvents.

Herein, ultrasound-assisted emulsification microextraction (USAEME) and dispersive liquid-liquid microextraction (DLLME) methods based on applying low-density organic solvents have been critically compared for the speciation of inorganic selenium, Se(IV) (selenite) and Se(VI) (selenate) in environmental water samples by gas chromatography-flame ionization detection (GC-FID). At pH 2 and T=75°C for 7 min, only Se(IV) was able to form the piazselenol complex with 4-nitro-o-phenylenediamine. Piazselenol was extracted using an extraction solvent and was injected into a GC-FID instrument for the determination of Se(IV).

A new solid phase micro extraction for simultaneous head space extraction of ultra traces of polar and non-polar compounds.

The results of the innovative study on a new stationary phase with high efficiency based on ZnO nano and micro rod coating on fused silica are reported in this paper. ZnO nanorods with a diameter in the range of 70-300 nm and the length of about 500 nm, have been grown on fused silica fibers using a hydrothermal process. The extraction properties of the fiber were investigated using headspace solid-phase microextraction (HS-SPME) mode coupled with gas chromatography-mass spectrometry detection (GC-MS) for 1,4-dichloro-nitrobenzene, biphenyl and acenaphthene.

Headspace hollow fiber protected liquid-phase microextraction combined with gas chromatography-mass spectroscopy for speciation and determination of volatile organic compounds of selenium in environmental and biological samples.

A simple and novel speciation method for the determination of volatile organic compounds of selenium (dimethylselenide (DMSe) and dimethyldiselenide (DMDSe) has been developed using a headspace hollow fiber protected liquid-phase microextraction (HS-HF-LPME) combined with capillary gas chromatography-mass spectrometry (GC-MS). The organic solvent impregnated in the pores and filled inside the porous hollow fiber membrane was used as an extraction interface in the HS-HF-LPME of the compounds. The effect of different variables on the extraction efficiency was studied simultaneously using an experimental design.

Speciation and determination of ultra trace amounts of inorganic tellurium in environmental water samples by dispersive liquid-liquid microextraction and electrothermal atomic absorption spectrometry.

A simple and powerful method has been developed for the rapid and selective determination of Te(IV) and Te(VI), employing dispersive liquid-liquid microextraction combined with electrothermal atomic absorption spectrometry using palladium as permanent modifier. Under acidic conditions pH 1, only Te(IV) can form a complex with ammonium pyrrolidine dithiocarbamate (APDC) and therefore be extracted into fine droplets of carbon tetrachloride (extraction solvent) which are dispersed with ethanol into the water sample solution. After centrifugation, Te(IV) was determined in the sedimented organic phase while Te(VI) remained in the aqueous phase.

Simultaneous speciation and preconcentration of ultra traces of inorganic tellurium and selenium in environmental samples by hollow fiber liquid phase microextraction prior to electrothermal atomic absorption spectroscopy determination.

A simple and effective speciation and preconcentration method based on hollow fiber liquid phase microextraction (HF-LPME) was developed for simultaneous separation of trace inorganic tellurium and selenium in environmental samples prior to electrothermal atomic absorption spectroscopy (ETAAS) determination. The method involves the selective extraction of the Te (IV) and Se (IV) species by HF-LPME with the use of ammonium pyrrolidinecarbodithioate (APDC) as the chelating agent. The complex compounds were extracted into 10 microL of toluene and the solutions were injected into a graphite furnace for the determination of Te (IV) and Se (IV).

Preconcentration and determination of ultra-traces of platinum in human serum using the combined electrodeposition-electrothermal atomic absorption spectroscopy (ED-ETAAS) and chemometric method.

Platinum compounds, including cis-dichlorodiaminoplatinum(II) or cisplatin, are an important class of anti-cancer drugs, which should be carefully monitored in the biological fluids. In this study, electrodeposition coupled with electrothermal atomic absorption spectrometry (ETAAS) was used for determination of Pt concentration in the human serum samples. The chemometric techniques were also used to verify the probable interactions among the important and effective parameters in the atomization process.

An improved electrochemical method for the synthesis of some benzofuran derivatives.

Electrochemical oxidation of catechol and some 3-substituted catechols (1a--c) has been studied in the presence of 2-chloro-5,5-dimethyl-1,3-cyclohexanedione (3) in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (1a--c) participate in a Michael addition reaction with 2-chloro-5,5-dimethyl-1,3-cyclohexanedione (3) with consumption of only two electrons per molecule of (1a--c) to from the corresponding benzoforans (10a--c). The electrochemical synthesis of benzofurans has been successfully performed at a carbon rod electrode and in an undivided cell with high yields and purity.

Electrochemical oxidation of 2,3-dimethylhydroquinone in the presence of 1,3-dicarbonyl compounds.

The electrooxidation of 2,3-dimethylhydroquinone (1) has been studied in the presence of 2-phenyl-1,3-indandione (3a), 3-hydroxy-1H-phenalen-1-one (3b), and 2-chloro-5,5-dimethyl-1,3-cyclohexanedione (3c) as CH acid nucleophiles in water/acetonitrile (85/15) solution, using cyclic voltammetry and controlled-potential coulometry. The results indicate that p-benzoquinone, generated by electrochemically driven oxidation of the 2,3-dimethylhydroquinone (1), is scavenged by 3a-c, to give related products (5a, 9b, 8c) via various electrochemical mechanisms. The electrochemical syntheses of 5a, 9b, and 8c have been successfully performed in one-pot in an undivided cell using an environmentally friendly method with high atomic economy.

Analysis of anatoxin-a using polyaniline as a sorbent in solid-phase microextraction coupled to gas chromatography-mass spectrometry.

A simple and sensitive method for determining anatoxin-a in aqueous samples was developed using solid-phase microextraction (SPME) and gas chromatography with mass spectrometry (GC-MS) detection. Three forms of polyaniline (PANI) films and a single form of polypyrrole (PPY) film were prepared and applied for SPME. The extraction properties of these films to anatoxin-a were examined and it was shown that leucoemeraldine form of PANI displayed a better selectivity to this compound.

Monitoring of the fermentation media of citric acid by the trimethylsilyl derivatives of the organic acids formed.

In this approach, a derivatization method is described for monitoring of organic acids in fermentation media without any separation step. The aqueous phase of fermentation media was evaporated and heated in a silylation reagent to form trimethylsilyl (TMS) derivatives. The silylated compounds are analyzed by 29Si nuclear magnetic resonance (29Si NMR) and gas chromatography-mass spectrometry (GC-MS).

Development of a new microelectrolysis system for in-situ electrodeposition of ultra-traces of gold prior to measurement by ETAAS.

Electrodeposition is known to be suitable for separation and preconcentration of extremely low concentrations of analyte from bulk samples and is instrumentally is very simple. In this approach a new combined system was designed for in-situ electrodeposition of ultratrace levels of gold from micro samples on to a graphite furnace prior to determination by electrothermal atomic absorption spectrometry (ETAAS). Sediment samples were digested and traces of the gold content were extracted with boiling aqua regia.