We present a highly stable bow-tie power enhancement cavity for critical second harmonic generation (SHG) into the UV using a Brewster-cut β-BaBO (BBO) nonlinear crystal. The cavity geometry is suitable for all UV wavelengths reachable with BBO and can be modified to accommodate anti-reflection coated crystals, extending its applicability to the entire wavelength range accessible with non-linear frequency conversion. The cavity is length-stabilized using a fast general purpose digital PI controller based on the open source STEMlab 125-14 (formerly Red Pitaya) system acting on a mirror mounted on a fast piezo actuator.
View Article and Find Full Text PDFWe have developed an avalanche transistor-based pulse generator for driving the photocathode of an image intensifier, which comprises a mainly capacitive load on the order of 100 pF. The circuit produces flat-top pulses with a rise time of 2 ns, a FWHM of 10 ns, and an amplitude of tens of V at a high repetition rate in the range of tens of MHz. The generator is built of identical avalanche transistor sections connected in parallel and triggered in a sequence, synchronized to a reference rf signal.
View Article and Find Full Text PDFWe present the design, construction, and characterization of a multichannel, low-drift, low-noise dc voltage source specially designed for biasing the electrodes of segmented linear Paul traps. The system produces 20 output voltage pairs having a common-mode range of 0 to +120 V with 3.7 mV/LSB (least significant bit) resolution and differential ranges of ±5 V with 150 μV/LSB or ±16 V with 610 μV/LSB resolution.
View Article and Find Full Text PDFSilicon-germanium heterojunction bipolar transistors can be used to construct low-noise cryogenic amplifiers. We present a dc-coupled differential amplifier capable of operating down to 10 K. In this temperature regime it has bandwidth of 15 MHz and noise temperature as low as 1.
View Article and Find Full Text PDFPurpose: Mechanical stability of the postoperative sternum was assessed using novel analysis based on vibration response.
Description: The response to controlled vibration in the 50 Hz to 1,500 Hz range was studied in 22 elective cardiac surgical patients with an accelerometer, recorded, and processed on a personal computer. Each patient had four measurement sessions.