Chemical Cleaning Techniques for Fouled RO Membranes: Enhancing Fouling Removal and Assessing Microbial Composition.

Membrane fouling, a major challenge in desalination, is addressed in this study by investigating three different chemical cleaning protocols (A, B, and C) targeting fouled reverse osmosis (RO) membranes and microbial community composition. Cleaning protocols A and B involve different chemical treatments selected based on preliminary tests and literature review, while protocol C follows the manufacturer's standard recommendation. Membrane morphology, foulant composition, and microbial community variability in fouled, virgin, and cleaned membranes are studied.

Nanomaterial grafted polymorphous activated carbon cloth surface for antibacterial, capacitive deionization and oil spill cleaning applications.

This work reports the development of multifunctional or polymorphous surfaces using zinc oxide (ZnO) nanorods, silica (SiO), and fluoropolymer functionalization in a sequential process. Firstly, zinc oxide nanorods were grown on activated carbon cloth (ACC) using a simple low-temperature synthesis process. ZnO nanorods-coated ACC substrate was applied to investigate the antimicrobial properties, and the results showed inhibition of 50% for Escherichia coli (E.

Sustainable gliadin - Metal oxide composites for efficient inactivation of Escherichia coli and remediation of cobalt (II) from water.

Bio-based materials facilitate greener approach to engineering novel materials with multifunctional properties for various applications including water treatment. In this study, we extracted gliadin from wheat gluten using alcoholic solvent. The aggregation limitations of gliadin protein were overcome by functionalisation with metal oxides (MOs) TiO, AgFeO and AgFe-TiO prepared by chemical precipitations.

Development of portable sensor for the detection of bacteria: effect of gold nanoparticle size, effective surface area, and interparticle spacing upon sensing interface.

In this study, systematic development of a portable sensor for the rapid detection of Escherichia coli (E. coli) and Exiguobacterium aurantiacum (E. aurantiacum) was reported.

Autopsy of Used Reverse Osmosis Membranes from the Largest Seawater Desalination Plant in Oman.

The Barka desalination plant, commissioned in 2018, is the largest desalination plant in Oman. It has a capacity of 281 MLD with a reverse osmosis (RO) first-pass recovery rate of 46%. As part of the standard operator practice, a membrane autopsy was conducted to determine the cause of reductions in membrane performance.

Effects of crystallization temperature on the characteristics of sugar crystals in date fruit syrup as measured by differential scanning calorimetry (DSC), polarized microscopy (PLM), and X-ray diffraction (XRD).

Characteristics of sugar crystals are important for developing set-syrup due to their contribution to the desired mouth feel when consumed. Two types of set-syrup (i.e.

Free and partially encapsulated manganese ferrite nanoparticles in multiwall carbon nanotubes.

Free and partially encapsulated manganese ferrite (MnFeO) nanoparticles are synthesized and characterized regarding structure, surface, and electronic and magnetic properties. The preparation method of partially encapsulated manganese ferrite enables the formation of a hybrid nanoparticle/tube system, which exhibits properties of manganese ferrite nanoparticles inside and attached to the external surface of the tubes. The effect of having manganese ferrite nanoparticles inside the tubes is observed as a shift in the X-ray diffraction peaks and as an increase in stress, hyperfine field, and coercivity when compared to free manganese ferrite nanoparticles.

Anticorrosion Coated Stainless Steel as Durable Support for C-N-TiO Photo Catalyst Layer.

The development of durable photocatalytic supports resistant in harsh environment has become challenging in advanced oxidation processes (AOPs) focusing on water and wastewater remediation. In this study, stainless steel (SS), SS/Ti (N,O) and SS/Cr-N/Cr (N,O) anticorrosion layers on SS meshes were dip-coated with sol gel synthesised C-N-TiO photo catalysts pyrolysed at 350 °C for 105 min, using a heating rate of 50 °C/min under N gas. The supported C-N-TiO films were characterised by scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and Raman spectroscopy.

ZnO nanorod-chitosan composite coatings with enhanced antifouling properties.

The current study describes the fabrication of chitosan‑zinc oxide nanorods composite (CHT/ZnO) on fiberglass panels (support substrate). ZnO nanorods (NRs) with size ranging from 20 to 100 nm and some microrods with an approximate size of 0.5-1 μm were grown on fiberglass panels.

Toxicity of Different Zinc Oxide Nanomaterials at 3 Trophic Levels: Implications for Development of Low-Toxicity Antifouling Agents.

Because zinc oxide (ZnO) nanomaterials are used in antifouling and antibacterial solutions, understanding their toxic effects on different aquatic organisms is essential. In the present study, we evaluated the toxicity of ZnO nanoparticles of 10 to 30 nm (ZnONPI) and 80 to 200 nm (ZnONPII), ZnO nanorods (width 80 nm, height 1.7 µm) attached to the support substrate (glass, ZnONRG) and not attached (ZnONRS), as well as Zn ions at concentrations ranging from 0.

Removal of heavy metal ions by capacitive deionization: Effect of surface modification on ions adsorption.

Activated carbon cloth (ACC) coated with zinc oxide (ZnO) nanoparticles (NPs) have been used as electrodes in flow-by capacitive deionization (CDI) system. Aqueous solution of individual Pb and Cd ions and mixed Pb and Cd ions were used as test contaminant in CDI system to study the effect of surface modification upon ions removal efficiency. Due to the aggregated structure of ZnO NPs on ACC surface, the modified ACC electrodes develop the additional surface area as well as dielectric barrier therefore resulting in higher specific capacitance.

An Easy-to-Use Tool for Modeling the Dynamics of Capacitive Deionization.

Capacitive deionization is an emerging method of desalinating brackish water that has been presented as an alternative to the widely applied technologies such as reverse osmosis. However, for the technology to find more widespread use, it is important not only to improve its efficiency but also to make its modeling more accessible for researchers. In this work, a program has been developed and provided as an open-source with which a user can simulate the performance of a capacitive deionization system by simply entering the basic experimental conditions.

Biodiesel production over a catalyst prepared from biomass-derived waste date pits.

Date palms are predominately produced in arid regions and the date pits, or seeds, produced from them are sometimes considered to be a waste. Date pits, ground to powder following an oil extraction, were used to synthesize a renewable heterogeneous catalyst. The green carbon catalyst was modified by an alkaline earth metal oxide (CaO).

Bioinspired nanocoatings for biofouling prevention by photocatalytic redox reactions.

Aquaculture is a billion dollar industry and biofouling of aquaculture installations has heavy economic penalties. The natural antifouling (AF) defence mechanism of some seaweed that inhibits biofouling by production of reactive oxygen species (ROS) inspired us to mimic this process by fabricating ZnO photocatalytic nanocoating. AF activity of fishing nets modified with ZnO nanocoating was compared with uncoated nets (control) and nets painted with copper-based AF paint.

Self-decontaminating photocatalytic zinc oxide nanorod coatings for prevention of marine microfouling: a mesocosm study.

The antifouling (AF) properties of zinc oxide (ZnO) nanorod coated glass substrata were investigated in an out-door mesocosm experiment under natural sunlight (14:10 light: dark photoperiod) over a period of five days. The total bacterial density (a six-fold reduction) and viability (a three-fold reduction) was significantly reduced by nanocoatings in the presence of sunlight. In the absence of sunlight, coated and control substrata were colonized equally by bacteria.

Antifouling properties of zinc oxide nanorod coatings.

In laboratory experiments, the antifouling (AF) properties of zinc oxide (ZnO) nanorod coatings were investigated using the marine bacterium Acinetobacter sp. AZ4C, larvae of the bryozoan Bugula neritina and the microalga Tetraselmis sp. ZnO nanorod coatings were fabricated on microscope glass substrata by a simple hydrothermal technique using two different molar concentrations (5 and 10 mM) of zinc precursors.

Enhancement in ion adsorption rate and desalination efficiency in a capacitive deionization cell through improved electric field distribution using electrodes composed of activated carbon cloth coated with zinc oxide nanorods.

Electrodes composed of activated carbon cloth (ACC) coated with zinc oxide (ZnO) nanorods are compared with plain ACC electrodes, with respect to their desalination efficiency of a 17 mM NaCl solution at different applied potentials. Polarization of the ZnO nanorods increased the penetration depth and strength of the electric field between the electrodes, leading to an increase in the capacitance and charge efficiency at reduced input charge ratios. Uniform distribution of the electric field lines between two electrodes coated with ZnO nanorods led to faster ion adsorption rates, reduced the electrode saturation time, and increased the average desalination efficiency by ∼45% for all applied potentials.

One pot synthesis of opposing 'rose petal' and 'lotus leaf' superhydrophobic materials with zinc oxide nanorods.

The synthesis in one pot(1) of opposing 'rose petal' and 'lotus leaf' superhydrophobic materials from commercially available superhydrophilic cloth substrates of varying texture is described for the first time. Surfaces of 'rough' textured cloth and 'smooth' textured cloth were simultaneously rendered superhydrophobic by growing zinc oxide (ZnO) nanorods by a hydrothermal process in the same chemical bath. Contact angle hysteresis and water pendant drop tests revealed strong water adhesion to ZnO microrod-treated rough cloth.

Role of central metal ions in hematoporphyrin-functionalized titania in solar energy conversion dynamics.

In this study, we have investigated the efficacy of electron transfer processes in hematoporphyrin (HP) and iron hematoporphyrin ((Fe)HP) sensitized titania as potential materials for capturing and storing solar energy. Steady-state and picosecond-resolved fluorescence studies show the efficient photoinduced electron transfer processes in hematoporphyrin-TiO2 (HP-TiO2) and Fe(III)-hematoporphyrin-TiO2 (Fe(III)HP-TiO2) nanohybrids, which reveal the role of central metal ions in electron transfer processes. The bidentate covalent attachment of HP onto TiO2 particulates is confirmed by FTIR, Raman scattering and X-ray photoelectron spectroscopy (XPS) studies.

Unusual surface and edge morphologies, sp2 to sp3 hybridized transformation and electronic damage after Ar+ ion irradiation of few-layer graphene surfaces.

Roughness and defects induced on few-layer graphene (FLG) irradiated by Ar+ ions at different energies were investigated using X-ray photoemission spectroscopy (XPS) and atomic force microscopy techniques. The results provide direct experimental evidence of ripple formation, sp2 to sp3 hybridized carbon transformation, electronic damage, Ar+ implantation, unusual defects and edge reconstructions in FLG, which depend on the irradiation energy. In addition, shadowing effects similar to those found in oblique-angle growth of thin films were seen.

Superhydrophobic surfaces using selected zinc oxide microrod growth on ink-jetted patterns.

The synthesis and properties of superhydrophobic surfaces based on binary surface topography made of zinc oxide (ZnO) microrod-decorated micropatterns are reported. ZnO is intrinsically hydrophilic but can be utilized to create hydrophobic surfaces by creating artificial roughness via microstructuring. Micron scale patterns consisting of nanocrystalline ZnO seed particles were applied to glass substrates with a modified ink-jet printer.

Enhanced visible light photocatalysis through fast crystallization of zinc oxide nanorods.

Hydrothermally grown ZnO nanorods have inherent crystalline defects primarily due to oxygen vacancies that enhance optical absorption in the visible spectrum, opening up possibilities for visible light photocatalysis. Comparison of photocatalytic activity of ZnO nanorods and nanoparticle films on a test contaminant methylene blue with visible light irradiation at 72 kilolux (klx) showed that ZnO nanorods are 12-24% more active than ZnO nanoparticulate films. This can be directly attributed to the increased effective surface area for adsorption of target contaminant molecules.