AlGaAs as an Alternative Solar Water Splitting Material: Insights into Performance, Stability, and Future Directions.

This study offers an in-depth examination of aluminum gallium arsenide (AlGaAs) as a high-performance and durable material for photoelectrochemical water splitting, a key method of cost-effective renewable hydrogen production. Purpose-designed pin-AlGaAs photocathodes are demonstrated to yield a remarkable photocurrent density of over 15 mA/cm and an impressive onset potential of 1.11 V vs RHE.

Nanowire Array Breath Acetone Sensor for Diabetes Monitoring.

Diabetic ketoacidosis (DKA) is a life-threatening acute complication of diabetes characterized by the accumulation of ketone bodies in the blood. Breath acetone, a ketone, directly correlates with blood ketones. Therefore, monitoring breath acetone can significantly enhance the safety and efficacy of diabetes care.

Lasing in Zn-doped GaAs nanowires on an iron film.

In this work, we demonstrate optically pumped lasing in highly Zn-doped GaAs nanowires (NWs) lying on an iron film. The conically shaped NWs are first covered with an 8 nm thick AlOfilm to prevent atmospheric oxidation and mitigate band-bending effects. Multimode and single-mode lasing have been observed for NWs with a length greater or smaller than 2m, respectively.

Core-shell GaN/AlGaN nanowires grown by selective area epitaxy.

GaN/AlGaN core-shell nanowires with various Al compositions have been grown on GaN nanowire array using selective area metal organic chemical vapor deposition technique. Growth of the AlGaN shell using pure N carrier gas resulted in a smooth surface for the nonpolar -plane sidewalls with superior optical properties, whereas, growth using a mixed N/H carrier gas resulted in a striated surface similar to the commonly observed morphology in the growth of nonpolar III-nitrides. The Al compositions in the AlGaN shells are found to be less than the gas phase input ratio.

A Self-Powered Portable Nanowire Array Gas Sensor for Dynamic NO Monitoring at Room Temperature.

The fast development of the Internet of Things (IoT) has driven an increasing consumer demand for self-powered gas sensors for real-time data collection and autonomous responses in industries such as environmental monitoring, workplace safety, smart cities, and personal healthcare. Despite intensive research and rapid progress in the field, most reported self-powered devices, specifically NO sensors for air pollution monitoring, have limited sensitivity, selectivity, and scalability. Here, a novel photovoltaic self-powered NO sensor is demonstrated based on axial p-i-n homojunction InP nanowire (NW) arrays, that overcome these limitations.

Effect of Au substrate and coating on the lasing characteristics of GaAs nanowires.

Optically pumped lasing from highly Zn-doped GaAs nanowires lying on an Au film substrate and from Au-coated nanowires has been demonstrated up to room temperature. The conically shaped GaAs nanowires were first coated with a 5 nm thick AlO shell to suppress atmospheric oxidation and band-bending effects. Doping with a high Zn concentration increases both the radiative efficiency and the material gain and leads to lasing up to room temperature.

Forward and Backward Switching of Nonlinear Unidirectional Emission from GaAs Nanoantennas.

High-index III-V semiconductor nanoantennas have gained great attention for enhanced nonlinear light-matter interactions, in the past few years. However, the complexity of nonlinear emission profiles imposes severe constraints on practical applications, such as in optical communications and integrated optoelectronic devices. These complexities include the lack of unidirectional nonlinear emission and the severe challenges in switching between forward and backward emissions, due to the structure of the susceptibility tensor of the III-V nanoantennas.

Threshold reduction and yield improvement of semiconductor nanowire lasers processing-related end-facet optimization.

Both gain medium design and cavity geometry are known to be important for low threshold operation of semiconductor nanowire lasers. For many applications nanowire lasers need to be transferred from the growth substrate to a low-index substrate; however, the impact of the transfer process on optoelectronic performance has not been studied. Ultrasound, PDMS-assisted and mechanical rubbing are the most commonly used methods for nanowire transfer; each method may cause changes in the fracture point of the nanowire which can potentially affect both length and end-face mirror quality.

InGaAsP as a Promising Narrow Band Gap Semiconductor for Photoelectrochemical Water Splitting.

While photoelectrochemical (PEC) water splitting is a very promising route toward zero-carbon energy, conversion efficiency remains limited. Semiconductors with narrower band gaps can absorb a much greater portion of the solar spectrum, thereby increasing efficiency. However, narrow band gap (∼1 eV) III-V semiconductor photoelectrodes have not yet been thoroughly investigated.

Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas.

Second-harmonic generation (SHG) in resonant dielectric Mie-scattering nanoparticles has been hailed as a powerful platform for nonlinear light sources. While bulk-SHG is suppressed in elemental semiconductors, for example, silicon and germanium due to their centrosymmetry, the group of zincblende III-V compound semiconductors, especially (100)-grown AlGaAs and GaAs, have recently been presented as promising alternatives. However, major obstacles to push the technology toward practical applications are the limited control over directionality of the SH emission and especially zero forward/backward radiation, resulting from the peculiar nature of the second-order nonlinear susceptibility of this otherwise highly promising group of semiconductors.

Ultrathin TaO electron-selective contacts for high efficiency InP solar cells.

Heterojunction solar cells with transition-metal-oxide-based carrier-selective contacts have been gaining considerable research interest owing to their amenability to low-cost fabrication methods and elimination of parasitic absorption and complex semiconductor doping process. In this work, we propose tantalum oxide (Ta2O5) as a novel electron-selective contact layer for photo-generated carrier separation in InP solar cells. We confirm the electron-selective properties of Ta2O5 by investigating band energetics at the InP-Ta2O5 interface using X-ray photoelectron spectroscopy.

Four-Dimensional Probing of Phase-Reaction Dynamics in Au/GaAs Nanowires.

Nanoeutectic phase reaction covers the fundamental study of a chemical and physical reaction of multiple phases at the nanoscale. Here, we report the direct visualization of phase-reaction dynamics in Au/GaAs nanowires (NWs) using four-dimensional (4D) electron microscopy. The NW phase reactions were initiated with a pump laser pulse, while the following dynamics in the Au/GaAs NW was probed by a precisely time-delayed electron pulse.

Optical Study of p-Doping in GaAs Nanowires for Low-Threshold and High-Yield Lasing.

Semiconductor nanowires suffer from significant non-radiative surface recombination; however, heavy p-type doping has proven to be a viable option to increase the radiative recombination rate and, hence, quantum efficiency of emission, allowing the demonstration of room-temperature lasing. Using a large-scale optical technique, we have studied Zn-doped GaAs nanowires to understand and quantify the effect of doping on growth and lasing properties. We measure the non-radiative recombination rate ( k) to be (0.

The effect of Sn addition on GaAs nanowire grown by vapor-liquid-solid growth mechanism.

Impurity addition is a crucial aspect for III-V nanowire growth. In this study, we demonstrated the effect of the Sn addition on GaAs nanowire growth by metal-organic chemical vapor deposition. With increasing the tetraethyltin flow rate, the nanowire axial growth was suppressed while the nanowire lateral growth was promoted, as well as planar defects were increased.

Photoelectrochemical studies of InGaN/GaN MQW photoanodes.

The research interest in photoelectrochemical (PEC) water splitting is ever growing due to its potential to contribute towards clean and portable energy. However, the lack of low energy band gap materials with high photocorrosion resistance is the primary setback inhibiting this technology from commercialisation. The ternary alloy InGaN shows promise to meet the photoelectrode material requirements due to its high chemical stability and band gap tunability.

Dynamics and control of gold-encapped gallium arsenide nanowires imaged by 4D electron microscopy.

Eutectic-related reaction is a special chemical/physical reaction involving multiple phases, solid and liquid. Visualization of a phase reaction of composite nanomaterials with high spatial and temporal resolution provides a key understanding of alloy growth with important industrial applications. However, it has been a rather challenging task.

Improved photoelectrochemical performance of GaN nanopillar photoanodes.

In this work, we report on the photoelectrochemical (PEC) investigation of n-GaN nanopillar (NP) photoanodes fabricated using metal organic chemical vapour deposition and the top-down approach. Substantial improvement in photocurrents is observed for GaN NP photoanodes compared to their planar counterparts. The role of carrier concentration and NP dimensions on the PEC performance of NP photoanodes is further elucidated.

Radiation effects on GaAs/AlGaAs core/shell ensemble nanowires and nanowire infrared photodetectors.

With the recent advances in nanowire (NW) growth and fabrication, there has been rapid development and application of GaAs NWs in optoelectronics. It is also of importance to study the radiation tolerance of optoelectronic nano-devices for atomic energy and space-based applications. Here, photoluminescence (PL) and time-resolved photoluminescence measurements were carried out on GaAs/AlGaAs core/shell NWs at room temperature before and after 1 MeV proton irradiation with fluences ranging from 1.