Investigating the Translational Value of Periprosthetic Joint Infection Models to Determine the Risk and Severity of Staphylococcal Biofilms.

With the advent of antibiotic-eluting polymeric materials for targeting recalcitrant infections, using preclinical models to study biofilms are crucial for improving the treatment efficacy in periprosthetic joint infections. The stratification of risk and severity of infections is needed to develop an effective clinical dosing framework with better treatment outcomes. We use in vivo and in vitro implant-associated infection models to demonstrate that methicillin-sensitive and resistant (MSSA and MRSA) have model-dependent distinct implant and peri-implant tissue colonization patterns.

Diffusion doping of analgesics into UHMWPE for prophylactic pain management.

Pain management after total joint arthroplasty is often addressed by systemic delivery of opioids. Local delivery of non-opioid analgesic drugs directly in the joint space from the UHMWPE component of the prosthesis would be highly beneficial to increase the efficacy of the drugs, decreasing the overall side effects and the risk of opioid addiction. It has been shown that effective concentrations of local analgesics can be achieved by eluting from analgesic-blended UHMWPE; however, this approach is limited by the decrease in mechanical properties resulting from the extent of phase separation of the blended drugs from the polymeric matrix.

Investigating the translational value of Periprosthetic Joint Infection (PJI) models to determine the risk and severity of Staphylococcal biofilms.

With the advent of antibiotic-eluting polymeric materials for targeting recalcitrant infections, using preclinical models to study biofilm is crucial for improving the treatment efficacy in periprosthetic joint infections. The stratification of risk and severity of infections is needed to develop an effective clinical dosing framework with better outcomes. Here, using in-vivo and in-vitro implant-associated infection models, we demonstrate that methicillin-sensitive and resistant (MSSA and MRSA) have model-dependent distinct implant and peri-implant tissue colonization patterns.

The Effect of Supplementary Staple Fixation on Biomechanical Properties of Soft Tissue Graft Tibial Fixation in Anterior Cruciate Ligament Reconstruction.

This study aimed to test and compare the biomechanical properties of three tibial fixation methods of anterior cruciate ligament (ACL) tendon grafts under cyclic load and load-to-failure testing in the bovine proximal tibiae, comprising (1) staple fixation alone, (2) interference screw fixation alone, and (3) interference screw fixation with a supplementary staple. Twenty-four bovine tibiae used in the study were divided into three groups (eight proximal tibiae in each group) based on tibial fixation methods of ACL tendon grafts: group A (a spiked ligament staple alone), group B (a cannulated interference screw alone), and group C (a cannulated interference screw with a supplementary staple). Each graft fixation was exposed to cyclic loading conditions.

Irradiation Behavior of Analgesic and Nonsteroidal Anti-Inflammatory Drug-Loaded UHMWPE for Joint Replacement.

Local delivery of pain medication can be a beneficial strategy to address pain management after joint replacement, as it can decrease systemic opioid usage, leading to less side and long-term effects. In this study, we used ultrahigh molecular weight polyethylene (UHMWPE), commonly employed as a bearing material for joint implants, to deliver a wide set of analgesics and the nonsteroidal anti-inflammatory drug tolfenamic acid. We blended the drugs with UHMWPE and processed the blend by compression molding and sterilization by low-dose gamma irradiation.

Antibiotic-Loaded Ultrahigh Molecular Weight Polyethylenes.

The occurrence of periprosthetic joint infections (PJI) after total joint replacement constitutes a great burden for the patients and the healthcare system. Antibiotic-loaded polymethylmethacrylate (PMMA) bone cement is often used in temporary spacers during antibiotic treatment. PMMA is not a load-bearing solution and needs to be replaced by a functional implant.

Synergistic use of anti-inflammatory ketorolac and gentamicin to target staphylococcal biofilms.

Background: While antibiotics remain our primary tools against microbial infection, increasing antibiotic resistance (inherent and acquired) is a major detriment to their efficacy. A practical approach to maintaining or reversing the efficacy of antibiotics is the use of other commonly used therapeutics, which show synergistic antibacterial action with antibiotics. Here, we investigated the extent of antibacterial synergy between the antibiotic gentamicin and the anti-inflammatory ketorolac regarding the dynamics of biofilm growth, the rate of acquired resistance, and the possible mechanism of synergy.

The use of deep learning enables high diagnostic accuracy in detecting syndesmotic instability on weight-bearing CT scanning.

Purpose: Delayed diagnosis of syndesmosis instability can lead to significant morbidity and accelerated arthritic change in the ankle joint. Weight-bearing computed tomography (WBCT) has shown promising potential for early and reliable detection of isolated syndesmotic instability using 3D volumetric measurements. While these measurements have been reported to be highly accurate, they are also experience-dependent, time-consuming, and need a particular 3D measurement software tool that leads the clinicians to still show more interest in the conventional diagnostic methods for syndesmotic instability.

Biomechanical comparison of three different surgical methods in the surgical treatment of distal tibial metaphyseal fractures. An animal model study.

Background: The aim of this study is to investigate mechanical properties of minimally invasive plate osteosynthesis (MIPO), supracutaneousplating (SP), and unilateral external fixators (UEF) which can be performed for open tibial fractures.

Methods: An unstable diaphysial tibia fracture was created in 60 fresh sheep tibia specimens by performing an osteotomy at the middle of bones. Specimens were divided into 3 groups.

The efficacy of antibiotic-eluting material in a two-stage model of periprosthetic joint infection.

Periprosthetic joint infections occur in about 2% of patients who undergo primary total joint arthroplasty, a procedure performed over 1 million times in the United States. The gold standard of treatment is a two-stage revision. This study aimed to establish a two-stage procedure in a preclinical small animal model (rat) to test and compare the efficacy of an antibiotic-eluting material in managing infection.

Di-cumyl peroxide cross-linked UHMWPE/vitamin-E blend for total joint arthroplasty implants.

Majority of ultrahigh molecular weight polyethylene (UHMWPE) medical devices used in total joint arthroplasty are cross-linked using gamma radiation to improve wear resistance. Alternative methods of cross-linking are urgently needed to replace gamma radiation due to rapid decline in its supply. Peroxide cross-linking is a candidate method with widespread industrial applications.

Hydrogel device for analgesic drugs with in-situ loading and polymerization.

The high prevalence of opioid addiction and the shortcomings of systemic opioids has increased the pace of the search for alternative methods of pain management. The local delivery of pain medications has started to be used as a tool for pain management and to decrease the use of systemic opioids for these patients. Here, we explored an in-situ polymerizable hydrogel system for the local delivery of analgesics and nonsteroid anti-inflammatory drugs (NSAID) for orthopaedic applications.

Dual-analgesic loaded UHMWPE exhibits synergistic antibacterial effects against Staphylococci.

Total joint arthroplasty is one of the most common surgeries in the United States, with almost a million procedures performed annually. Periprosthetic joint infections (PJI) remain the most devastating complications associated with total joint replacement. Effective antibacterial prophylaxis after primary arthroplasty could substantially reduce incidence rate of PJI.

Comparison of the radiological parameters between dynamic-referencing tactile guidance robotic system and Microplasty® instrumentation in unicompartmental knee arthroplasty.

Objectives: This study aims to compare the radiological outcomes of unicompartmental knee arthroplasty (UKA) performed by a navigation-based robotic system versus Microplasty® instrumentation.

Patients And Methods: Between January 2018 and January 2019, a total of 90 knees of 75 patients (65 males, 10 females; mean age: 62.0±9.

Does the clamping method in local and systemic TXA applications in total knee arthroplasty change the game?: A retrospective comparative cohort study.

Many different methods and drain clamping periods have been described in systemic and local tranexamic acid (TXA) applications, and the superiority of the methods to each other has not been clearly demonstrated. The method of local infusion in combined TXA applications may not alter the Hb drop or total or hidden blood loss. We aim to compare two different combined TXA application methods.

Treatment of Ingrown Toenail with a Minimally Invasive Nail Fixator: Comparative Study with Winograd Technique.

Background: Many surgical techniques have been reported for treatment of ingrown toenails. Occurrence of infection after matricectomy procedures could cause clinicians to prefer using external braces in the treatment of ingrown toenails. This study compares patients with ingrown toenails who underwent the nail fixation technique and the Winograd technique.

Ultrasonography vıew for acute ankle ınjury: comparison of ultrasonography and magnetic resonance ımaging.

Introduction: We aim to asses the diagnostic performance of ankle ultrasonography in patients presenting with acute ankle sprain injury, with comparison to MRI (Manyetik Rezonans Ä°maging).

Materials And Methods: The study included patients who applied to the hospital within 48 h after an ankle sprain, and who presented with signs of pain, swelling, and tenderness in the ankle. Ankle ultrasonography examination was performed and an ankle MRI took place the same day.

The intra- and interobserver reliability of five commonly used intertrochanteric femur fracture classification systems.

Objectives: This study aims to evaluate the effect of surgical experience on reliability for Boyd-Griffin, Evans/Jensen, Evans, Orthopaedic Trauma Association (main and subgroups), and Tronzo classification systems.

Patients And Methods: Between January 2013 and December 2014, radiological images of a total of 60 patients (13 males, 47 females; mean age: 78.9±21.

Does bone penetration of cement differ by cement type and application time-point?

Intrusion of cement into bone is often considered an indirect indicator for implant stability in cemented joint replacement procedures. However, the influence of cement type (different viscosities/manufacturers) and application time-point on penetration of cements continues to be debated. This study aimed to quantify the effect of cement type and application time-point on the depth of penetration using porcine tibial specimens.

Defining and predicting radiographic knee osteoarthritis progression: a systematic review of findings from the osteoarthritis initiative.

Purpose: The purposes of this systematic review were to (1) identify the commonly used definitions of radiographic KOA progression, (2) summarize the important associative risk factors for disease progression based on findings from the OAI study and (3) summarize findings from radiographic KOA progression prediction modeling studies regarding the characterization of progression and outcomes.

Methods: A systematic review was performed by conducting a literature search of definitions, risk factors and predictive models for radiographic KOA progression that utilized data from the OAI database. Radiographic progression was further characterized into "accelerated KOA" and "typical progression," as defined by included studies.

Do total hip arthroplasty polyethylene liners without free radicals oxidize in vivo or ex vivo?

Crosslinking substantially reduces the wear of ultra-high molecular weight polyethylene (UHMWPE) used in total hip arthroplasty (THA) but some reports have indicated that first generation liners manufactured without antioxidants may be vulnerable to in vivo oxidation. This study evaluated maximum oxidation using Fourier transform infrared spectroscopy per ASTM F2102-06 and linear head penetration using a coordinate measuring machine among 66 revision-retrieved THA components with in vivo durations ranging from 0.02 to 24.

Assessing the utility of deep neural networks in predicting postoperative surgical complications: a retrospective study.

Background: Early detection of postoperative complications, including organ failure, is pivotal in the initiation of targeted treatment strategies aimed at attenuating organ damage. In an era of increasing health-care costs and limited financial resources, identifying surgical patients at a high risk of postoperative complications and providing personalised precision medicine-based treatment strategies provides an obvious pathway for reducing patient morbidity and mortality. We aimed to leverage deep learning to create, through training on structured electronic health-care data, a multilabel deep neural network to predict surgical postoperative complications that would outperform available models in surgical risk prediction.

Patient-specific musculoskeletal models as a framework for comparing ACL function in unicompartmental versus bicruciate retaining arthroplasty.

Unicompartmental knee arthroplasty has been shown to provide superior functional outcomes compared to total knee arthroplasty and have motivated development of advanced implant designs including bicruciate retaining knee arthroplasty. However, few validated frameworks are available to directly compare the effect of implant design and surgical techniques on ligament function and joint kinematics. In the present study, the subject-specific lower extremity models were developed based on musculoskeletal modeling framework using force-dependent kinematics method, and validated against in vivo telemetric data.

Comparing the performance of a deep convolutional neural network with orthopedic surgeons on the identification of total hip prosthesis design from plain radiographs.

Purpose: A crucial step in the preoperative planning for a revision total hip replacement (THR) surgery is the accurate identification of the failed implant design, especially if one or more well-fixed/functioning components are to be retained. Manual identification of the implant design from preoperative radiographic images can be time-consuming and inaccurate, which can ultimately lead to increased operating room time, more complex surgery, and increased healthcare costs.

Method: In this study, we present a novel approach to identifying THR femoral implants' design from plain radiographs using a convolutional neural network (CNN).