Suture Suspensionplasty Compared With Ligament Reconstruction and Tendon Interposition for Surgical Treatment of Thumb Carpometacarpal Arthritis.

Purpose: Thumb carpometacarpal (CMC) arthritis is the most common arthritis of the hand, with most studies demonstrating little difference in outcomes between various surgical treatment techniques. However, trapeziectomy, followed by ligament reconstruction and tendon interposition (LRTI), remains the technique of choice among hand surgeons in the United States. In 2009, suture suspensionplasty (SS) was first described as a less invasive alternative to LRTI.

Anatomic restoration of lateral humeral offset and humeral retroversion optimizes functional outcomes following reverse total shoulder arthroplasty.

Cadaveric and computer simulations suggest lateral humeral offset (LHO) and humeral retroversion (HR) are associated with strength and range of motion (ROM) after reverse total shoulder arthroplasty (rTSA), butin vivodata is lacking. This study aimed to evaluate the effects of implant parameters (i.e.

Characteristics of Patients Utilizing Telemedicine in Hand and Upper-Extremity Surgery.

Background: The impact of social determinants of health on patients' access to medical care and health outcomes is increasingly recognized. Telemedicine's rapid and widespread adoption altered the delivery of care. This study describes the characteristics of patients undergoing telemedicine visits with hand surgeons, without COVID-19 pandemic-related restrictions.

Off-Label Bone Morphogenetic Protein 2 Use Results in Successful Posterolateral Lumbar Fusion in a Veteran Population.

Introduction: Patients within the US Veterans Health Administration (VA) system have higher rates of comorbidities and chronic pain, increasing risks of complications/poor outcomes following spine surgery. Although the use of bone morphogenetic protein 2 (BMP-2) is established for anterior lumbar interbody fusion, its indications for off-label use in posterolateral fusion are unclear. The objective of this study was to evaluate safety and utility of BMP-2 in posterolateral fusion through a 15-year experience at the VA.

Surgical Parameters During Reverse Shoulder Arthroplasty Predict Post-Surgical Kinematics During the Hand-to-Head Motion.

Purpose: This study aimed to identify surgical parameters during reverse shoulder arthroplasty (RSA) that predict post-surgical kinematics during the hand-to-head motion (H2H) and to identify associations between kinematics and outcomes. We hypothesized that greater humeral retroversion and lateralization predict kinematics, and that more scapular upward rotation is associated with better PROs and more range of motion (ROM).

Methods: Thirty-five post-RSA patients consented to participate.

A quantum sensing metrology for magnetic memories.

Magnetic random access memory (MRAM) is a leading emergent memory technology that is poised to replace current non-volatile memory technologies such as eFlash. However, controlling and improving distributions of device properties becomes a key enabler of new applications at this stage of technology development. Here, we introduce a non-contact metrology technique deploying scanning NV magnetometry (SNVM) to investigate MRAM performance at the individual bit level.

Elbow Uncemented Hemiarthroplasty: Surgical Technique.

Management of elbow arthritis in younger and higher demand patients is challenging and may benefit from a distal humerus hemiarthroplasty that employs a noncemented method of implant fixation and stabilizes the elbow through ligament reconstruction. By not replacing both articulating surfaces, hardware longevity may be improved. We describe a novel system that may be indicated for the treatment of posttraumatic or primary osteoarthritis of the distal humerus.

Ankle and subtalar joint axes of rotation and center of rotation during walking and running in healthy individuals measured using dynamic biplane radiography.

The goal of this study was to determine how foot type and activity level affect ankle and hindfoot motion. Dynamic biplane radiography and a validated volumetric registration process was used to measure ankle and hindfoot motion of 20 healthy adults during walking and running. The helical axes of motion (HAM) during stance were calculated at the tibiotalar and subtalar joints.

Static stability of novel uncemented elbow hemiarthroplasty stabilized with ligament reconstruction.

Background: The purpose of this study was to create a model to simulate treatment of unreconstructable distal humerus fractures with hemiarthroplasty. Stability was restored with a latest plate-system that simultaneously tensions medial and lateral collateral ligament grafts.

Materials And Methods: Static varus and valgus elbow stability was tested in 11 cadaver elbows with intact ligaments and capsule at 5 flexion angles (0°, 30°, 60°, 90°, 120°).

Association Between Industry Sponsorship of Spine-Related Clinical Trials, Publication Status, and Research Outcomes.

Study Design: Observational Database Study.

Objectives: Prospective clinical trials in spinal surgery are expensive to conduct, especially when randomized, appropriately powered, and/or multicentered. Industry collaborations generate symbiotic relationships promoting technological advancement; however, they also allow for bias.

Prospective Cohort Study Comparing Ligament Reconstruction with Tendon Interposition and Suture-Only Suspension Arthroplasty.

Background: Basal joint arthritis is a common form of osteoarthritis. There is no consensus procedure for maintenance of trapezial height following trapeziectomy. Suture-only suspension arthroplasty (SSA) is a simple method for stabilizing the thumb metacarpal following trapeziectomy.

Validation of dynamic biplane radiography and three-dimensional model-based tracking for evaluation of dynamic thumb kinematics.

Dynamic biplane radiography (DBR) in conjunction with model-based tracking (MBT) has provided a suitable mechanism for biomechanical assessment of many joints but has not yet achieved widespread use at the thumb and wrist. The purpose of this work is to determine the accuracy of DBR with markerless MBT for the evaluation of thumb and wrist joint kinematics. Three 0.

Differences between men and women in coupled subtalar and tibiofemoral joint kinematics during gait revealed through dynamic biplane radiography.

It has been suggested that subtalar and tibiofemoral kinematics are coupled, such that abnormal subtalar inversion during the impact and push-off portions of stance may affect tibial rotation, leading to abnormal compensatory knee motion. This study aimed to characterize tibiofemoral and subtalar coupled motion and to determine if sex-dependent differences exist in lower extremity coupled motion. Twenty young adults were imaged at 100 frames/s using dynamic biplane radiography while walking.

Patient-specific factors, but neither regional anesthesia nor hip-specific cryotherapy, predict postoperative opioid requirements after hip arthroscopy for femoroacetabular impingement (FAI) syndrome.

Background: We sought to determine whether regional nerve block, cryotherapy variant, or patient-specific factors predict postoperative opioid requirements and pain control following hip arthroscopy.

Methods: 104 patients underwent hip arthroscopy with (n = 31) or without (n = 73) regional block and received cryotherapy with a universal pad [joint non-specific; no compression (n = 60)] or circumferential hip/groin wrap with intermittent compression (n = 44). Outcomes included total opioid prescription amounts, requests for refills, and unplanned clinical encounters for postoperative pain within 45 days of surgery.

Radiographic Thumb Metacarpal Subsidence Following Ligament Reconstruction With Tendon Interposition and Suture-Only Suspension Arthroplasty in the Treatment of Basal Joint Arthritis.

Background: The thumb carpometacarpal (CMC) joint is a common source of osteoarthritis. Following trapeziectomy, ligament reconstruction with tendon interposition (LRTI) is considered a "gold standard" treatment, but suture-only suspension arthroplasty (SSA) has recently emerged as a simpler alternative. Currently, there is no objective radiographic study comparing subsidence following these 2 techniques.

Implant characteristics affect in vivo shoulder kinematics during multiplanar functional motions after reverse shoulder arthroplasty.

The purpose of this study was to determine how implant characteristics affect in vivo shoulder kinematics after reverse shoulder arthroplasty (RSA). Kinematics of the affected upper limb were measured in 32 participants during five motions (scapular plane abduction, hand-to-head, hand-to-back, internal/external rotation at 90° abduction, and circumduction) using optical motion capture. Shoulder abduction, plane of elevation, and internal/external rotation range of motion (ROM), peak angles, and continuous kinematics waveforms were calculated for each motion.

Probing Magnetic Defects in Ultra-Scaled Nanowires with Optically Detected Spin Resonance in Nitrogen-Vacancy Center in Diamond.

Magnetic nanowires (NWs) are essential building blocks of spintronics devices as they offer tunable magnetic properties and anisotropy through their geometry. While the synthesis and compositional control of NWs have seen major improvements, considerable challenges remain for the characterization of local magnetic features at the nanoscale. Here, we demonstrate nonperturbative field distribution mapping in ultrascaled magnetic nanowires with diameters down to 6 nm by scanning nitrogen-vacancy magnetometry.

Use of continuous passive motion device after arthroscopic hip surgery decreases post-operative pain: A randomized controlled trial.

Background: We sought to determine whether continuous passive motion (CPM) usage improves outcomes following arthroscopic hip surgery involving acetabular labral repair. Our hypothesis is that CPM usage reduces pain and pain medication use and improves quality of life in individuals who undergo hip arthroscopy.

Methods: We created a randomized controlled trial consisting of 54 patients who underwent arthroscopic acetabular labral repair.

Bone marrow lesions: etiology and pathogenesis at the hip.

Bone marrow lesions (BML) are painful changes in subchondral bone which can be reliably identified on magnetic resonance imaging and have been identified in patients suffering from hip osteoarthritis (OA) and related conditions. Created via repetitive microdamage at the articular surface and dysregulated subchondral healing, BML have been linked to traumatic, inflammatory, degenerative, metabolic and neoplastic processes. While BML are known to be a common pathology throughout the body, BML at the hip have not been extensively studied in comparison to those at the knee.

Inpatient and outpatient opioid requirements after total joint replacement are strongly influenced by patient and surgical factors.

Aims: Currently, there is no single, comprehensive national guideline for analgesic strategies for total joint replacement. We compared inpatient and outpatient opioid requirements following total hip arthroplasty (THA) versus total knee arthroplasty (TKA) in order to determine risk factors for increased inpatient and outpatient opioid requirements following total hip or knee arthroplasty.

Methods: Outcomes after 92 primary total knee (n = 49) and hip (n = 43) arthroplasties were analyzed.

Resonant driving of a single photon emitter embedded in a mechanical oscillator.

Coupling a microscopic mechanical resonator to a nanoscale quantum system enables control of the mechanical resonator via the quantum system and vice-versa. The coupling is usually achieved through functionalization of the mechanical resonator, but this results in additional mass and dissipation channels. An alternative is an intrinsic coupling based on strain.

Role of the electron spin in determining the coherence of the nuclear spins in a quantum dot.

A huge effort is underway to develop semiconductor nanostructures as low-noise qubits. A key source of dephasing for an electron spin qubit in GaAs and in naturally occurring Si is the nuclear spin bath. The electron spin is coupled to each nuclear spin by the hyperfine interaction.

Effect of Alkali-Acid-Heat Chemical Surface Treatment on Electron Beam Melted Porous Titanium and Its Apatite Forming Ability.

Advanced additive manufacturing techniques such as electron beam melting (EBM), can produce highly porous structures that resemble the mechanical properties and structure of native bone. However, for orthopaedic applications, such as joint prostheses or bone substitution, the surface must also be bio-functionalized to promote bone growth. In the current work, EBM porous Ti6Al4V alloy was exposed to an alkali acid heat (AlAcH) treatment to bio-functionalize the surface of the porous structure.