Colorimetric sensing of cephradine through polypropylene glycol functionalized gold nanoparticles.

The development of metal nanoparticle-based facile colorimetric assays for drugs and insecticides is an emerging area of current scientific research. In the present work, polypropylene glycol was used for stabilization of gold nanoparticles (AuNPs) in a simple one-pot two-phase process and subsequently employed it for the specific detection of cephradine (CPH). The characterization of the prepared PPG-AuNPs was conducted through various analytical techniques such as UV-visible spectrophotometry, Fourier transform infrared spectroscopy, atomic force microscopy (AFM), zeta potential and zetasizer techniques.

Preparation, characterization, and binding profile of imprinted semi-IPN cryogel composite for aluminum.

Human body is greatly exposed to aluminum due to its high abundance in the environment. This nonessential metal is a threat to the patients of chronic renal disorders, as it is easily retained in their plasma and quickly accumulates in different tissues. Thus, there is great need to remove it from the aqueous environment.

A review on detection of heavy metals from aqueous media using nanomaterial-based sensors.

The extensive release of heavy metals into the natural water bodies has become globally prevalent from past few decades. Heavy metal toxicity is becoming a serious threat to human and the environment. Due to their prolonged half-life, potential accumulation in different parts of body, and non-biodegradability, metal ions are being obvious entities that can cause several hazardous health risks.

Salicylaldehyde derivative of nano-chitosan as an efficient adsorbent for lead(II), copper(II), and cadmium(II) ions.

In this study, a biodegradable natural polymer chitosan was modified with salicylaldehyde to prepare salicylaldehyde functionalized chitosan nanoparticles (N-Ch-Sal). The N-Ch-Sal was characterized by atomic force microscopy (AFM), scanning electron microscopy-energy-dispersive X-ray (SEM-EDX), Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA). The salicylaldehyde functionalized chitosan nanoparticles (N-Ch-Sal) (~80 nm) were then used for the adsorption of three heavy metals viz.

Banana peel: an effective biosorbent for aflatoxins.

This work reports the application of banana peel as a novel bioadsorbent for in vitro removal of five mycotoxins (aflatoxins (AFB1, AFB2, AFG1, AFG2) and ochratoxin A). The effect of operational parameters including initial pH, adsorbent dose, contact time and temperature were studied in batch adsorption experiments. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pHpzc) analysis were used to characterise the adsorbent material.

Geochemical controls of high fluoride groundwater in Umarkot Sub-District, Thar Desert, Pakistan.

Groundwater samples (n=152) were collected in the Thar Desert of the Umarkot Sub-District, Pakistan to evaluate the geochemical controls on the occurrence of high fluoride (F(-)) levels within the study area. Fluoride concentrations range from 0.06 to 44.

A rapid Fourier-transform infrared (FTIR) spectroscopic method for direct quantification of paracetamol content in solid pharmaceutical formulations.

A transmission FTIR spectroscopic method was developed for direct, inexpensive and fast quantification of paracetamol content in solid pharmaceutical formulations. In this method paracetamol content is directly analyzed without solvent extraction. KBr pellets were formulated for the acquisition of FTIR spectra in transmission mode.

Are bioactive-rich fractions functionally richer?

Plant bioresources are relied upon as natural, inexpensive, and sustainable remedies for the management of several chronic diseases worldwide. Plants have historically been consumed for medicinal purposes based on traditional belief, but this trend is currently changing. The growing interest in the medicinal properties of plant bioresources stems from concerns of side effects and other adverse effects caused by synthetic drugs.

Impact of seawater on distribution of fluoride and other ions in groundwater of Diplo area, Thar Desert Pakistan.

The role of seawater dilution, along with other water-quality components, has been studied to determine the causes of spatial distribution of high fluoride concentrations in the groundwater of the Diplo sub-district, Thar Desert, Pakistan. Fluoride ion concentration ranges of up to 7.60 mg/L were discovered, with mean and median values of 1.

Comparison of chemical composition of Aerva javanica seed essential oils obtained by different extraction methods.

Aerva javanica (Burm.f.) Juss.

Assay of phenolic compounds from four species of ber (Ziziphus mauritiana L.) fruits: comparison of three base hydrolysis procedure for quantification of total phenolic acids.

The present study was undertaken to investigate the flavonoid profile in four species of ber (Ziziphus mauritiana Lamk.) fruit. The 12 flavonoids identified were quercetin 3-O-robinobioside, quercetin 3-O-rutinoside, quercetin 3'-O-galactoside, quercetin 3'-O-glucoside, quercetin 3'-O-rhamnoside, quercetin 3'-O-pentosylhexoside, quercetin 3-O-6'malonylglucoside, quercetin 3'-O-malonylglucoside, luteolin 7-O-6'malonylglucoside, luteolin 7-O-malonylglucoside, myricetin 3-O-galactoside, and naringenin tri glycoside.

Antidiabetic properties of germinated brown rice: a systematic review.

Diet is an important variable in the course of type 2 diabetes, which has generated interest in dietary options like germinated brown rice (GBR) for effective management of the disease among rice-consuming populations. In vitro data and animal experiments show that GBR has potentials as a functional diet for managing this disease, and short-term clinical studies indicate encouraging results. Mechanisms for antidiabetic effects of GBR due to bioactive compounds like γ-aminobutyric acid (GABA), γ-oryzanol, dietary fibre, phenolics, vitamins, acylated steryl β-glucoside, and minerals include antihyperglycemia, low insulin index, antioxidative effect, antithrombosis, antihypertensive effect, hypocholesterolemia, and neuroprotective effects.

Chemical composition of essential oil from Calligonum polygonoides Linn.

The essential oil from air dried buds and roots of Calligonum polygonoides Linn., has been extracted from dry steam distillation and analysed for chemical composition by gas chromatography-mass spectrometry. In total, 27 and 10 compounds were analysed qualitatively and quantitatively, accounting for 68.

Development and implication of a capillary electrophoresis methodology for ciprofloxacin, paracetamol and diclofenac sodium in pharmaceutical formulations and simultaneously in human urine samples.

This work studies the development of a simple and fairly rapid methodology for simultaneous determination/separation of three frequently co-administered drugs; ciprofloxacin (CIP), paracetamol (PCT) and diclofenac sodium (DIC) using capillary electrophoresis (CE) with UV detection at 260 nm. Separation was achieved in only 6.5 min with a simple buffer of sodium tetraborate (50 mM) at pH 9.

Simple gas chromatographic method for the quantification of total cholesterol in fish meats.

Six fish species-Cirrhinus mrigala (Morakhi), Labeo rohita (Danbhro), Catla catla (Thalli), Wallago attu (Jarko), Ctenopharyngodon idella (Grass), and Cyprimus carpio (Gulfam)--commonly found in the Pakistani Indus river, were selected for fat and cholesterol evaluation. Fat content was quantified by the Folch method and cholesterol content was determined by a simple GC method. The application of the proposed method to quantify cholesterol content revealed variations among the six breeds evaluated.

Lithological influences on occurrence of high-fluoride groundwater in Nagar Parkar area, Thar Desert, Pakistan.

Factors regulating the occurrence of high fluoride (F(-)) concentrations in groundwater near Nagar Parkar Town, SE corner of Pakistan have been investigated considering lithological influences. F(-) ion concentrations in groundwater range up to 7.85 with mean value of 3.

A capillary zone electrophoretic method for simultaneous determination of seven drugs in pharmaceuticals and in human urine.

A simple, sensitive, and novel method has been developed and validated for the separation and simultaneous quantitation of seven structurally different drugs-pipemidic acid and ofloxacin quinolone antibiotics, pseudoephedrine decongestant, piroxicam anti-inflammatory, thiamin, pyridoxine, and cobalamin-in a mixture by capillary zone electrophoresis. Factors affecting the separation were pH, concentration of buffer, and applied voltage. Separation was carried out in < 9 min with a 50 mM sodium tetraborate buffer, pH 10, and an applied voltage of 30 kV in an uncoated silica capillary tube.

Geochemical factors controlling the occurrence of high fluoride groundwater in the Nagar Parkar area, Sindh, Pakistan.

Fluoride concentrations in groundwater near Nagar Parkar in the Thar Desert of southeastern Pakistan range from 1.13 to 7.85 mg/l, and roughly 78% of the samples contain fluoride in concentrations that exceed the drinking water standard of 1.

Utilization of picolinaldehyde-4-phenyl-3-thiosemicarbazone in sodium dodecylsulfate micelles for the spectrophotometric determination of iron, vanadium, and cobalt following partial least-squares regression analysis.

Partial least-squares regression was applied for the simultaneous determination of iron, vanadium, and cobalt after complexation with picolinaldehyde-4-phenyl-3-thiosemicarbazone (PAPT) in the presence of anionic sodium dodecylsulfate (SDS) micelles. These 3 complexed metal ions exhibited overlapping spectra in the 390-510 nm region with a maximum absorbance at 415 nm at pH 3.0 and enhanced absorbance in the presence of SDS.

Banana peel: a green and economical sorbent for the selective removal of Cr(VI) from industrial wastewater.

This study describes the use of banana peel, a commonly produced fruit waste, for the removal of Cr(VI) from industrial wastewater. The parameters pH, contact time, initial metal ion concentration, and temperature were investigated and the conditions resulting in rapid and efficient adsorption (95% within 10 min) were determined. The binding of metal ions was found to be pH dependent with the optimal sorption occurring at pH 2.

Evaluation of sorption of uranium onto metakaolin using X-ray photoelectron and Raman spectroscopies.

Metakaolin prepared from a natural clay mineral ore of aluminium kaolinite is a promising low cost and high activity aluminosilicate material that has been investigated for studying the sorption behavior of uranium. Here, metakaolin was characterized using X-ray photoelectron spectroscopy (XPS) and the effects of pH, contact time and initial metal ion concentration on its sorption behavior were studied. The sorption process was found to initially be rapid (approximately 60% at time 0 min) but became slower with time; equilibrium was established within 24 h (approximately 80% sorption).

A new simple sensitive differential pulse polarographic method for the determination of acrylamide in aqueous solution.

A new simple sensitive differential pulse polarographic (DPP) method was investigated for the determination of acrylamide (AA) directly in a neutral aqueous solution. The AA showed a well-defined and well-resolved peak in pure aqueous LiCl at -1.84V in the potential range from -1.

Electrolytic recovery of chromium salts from tannery wastewater.

Tannery wastewater collected from a local leather industry in Peshawar, Pakistan was subjected to DC electrolysis in a simple cell having two static sheet electrodes and stirring assembly after proper dilution and adjustment to desired conditions. One percent HNO(3) and 1% NaHCO(3) were used as electrolytes and pH adjusters. The latter salt also worked as sodium source for anodic deposition of Na(2)Cr(2)O(7).

Simpler spectrophotometric assay of paracetamol in tablets and urine samples.

A very fast, economical and simpler direct spectrophotometric method was investigated for paracetamol (PC) determination in aqueous medium without using any chemical reagents. The method is based on the photo-absorption of the analyte at 243 nm after dissolution in water. The change in structure of PC after addition of water was studied by comparing the corresponding FTIR spectra.