Experimental analysis and gene expression programming optimization of sustainable concrete containing mineral fillers.

Rapid urbanization has led to a high demand for concrete, causing a significant depletion of vital natural resources, notably river sand, which is crucial in the manufacturing process of concrete. As a result, there is a growing need for environmentally sustainable alternatives to fine aggregate in concrete. Quarry dust (QD) has evolved as a viable and ecologically friendly substitute in response to this demand.

Development of machine learning models for forecasting the strength of resilient modulus of subgrade soil: genetic and artificial neural network approaches.

Accurately predicting the Modulus of Resilience (M) of subgrade soils, which exhibit non-linear stress-strain behaviors, is crucial for effective soil assessment. Traditional laboratory techniques for determining M are often costly and time-consuming. This study explores the efficacy of Genetic Programming (GEP), Multi-Expression Programming (MEP), and Artificial Neural Networks (ANN) in forecasting MR using 2813 data records while considering six key parameters.

Soft computing models for prediction of bentonite plastic concrete strength.

Bentonite plastic concrete (BPC) is extensively used in the construction of water-tight structures like cut-off walls in dams, etc., because it offers high plasticity, improved workability, and homogeneity. Also, bentonite is added to concrete mixes for the adsorption of toxic metals.

Non-linear finite element analysis of SFRC beam-column joints under cyclic loading: enhancing ductility and structural integrity.

Brittle shear failure of beam-column joints, especially during seismic events poses a significant threat to structural integrity. This study investigates the potential of steel fiber reinforced concrete (SFRC) in the joint core to enhance ductility and overcome construction challenges associated with traditional reinforcement. A non-linear finite element analysis (NLFEA) using ABAQUS software was conducted to simulate the behavior of SFRC beam-column joints subjected to cyclic loading.

Comparative analysis of various machine learning algorithms to predict strength properties of sustainable green concrete containing waste foundry sand.

The use of waste foundry sand (WFS) in concrete production has gained attention as an eco-friendly approach to waste reduction and enhancing cementitious materials. However, testing the impact of WFS in concrete through experiments is costly and time-consuming. Therefore, this study employs machine learning (ML) models, including support vector regression (SVR), decision tree (DT), and AdaBoost regressor (AR) ensemble model to predict concrete properties accurately.

Evaluation of machine learning models for predicting TiO photocatalytic degradation of air contaminants.

The escalation of global urbanization and industrial expansion has resulted in an increase in the emission of harmful substances into the atmosphere. Evaluating the effectiveness of titanium dioxide (TiO) in photocatalytic degradation through traditional methods is resource-intensive and complex due to the detailed photocatalyst structures and the wide range of contaminants. Therefore in this study, recent advancements in machine learning (ML) are used to offer data-driven approach using thirteen machine learning techniques namely XG Boost (XGB), decision tree (DT), lasso Regression (LR2), support vector regression (SVR), adaBoost (AB), voting Regressor (VR), CatBoost (CB), K-Nearest Neighbors (KNN), gradient boost (GB), random Forest (RF), artificial neural network (ANN), ridge regression (RR), linear regression (LR1) to address the problem of estimation of TiO photocatalytic degradation rate of air contaminants.

Numerical and artificial intelligence based investigation on the development of design guidelines for pultruded GFRP RHS profiles subjected to web crippling.

This article presents a numerical and artificial intelligence (AI) based investigation on the web crippling performance of pultruded glass fiber reinforced polymers' (GFRP) rectangular hollow section (RHS) profiles subjected to interior-one-flange (IOF) loading conditions. To achieve the desired research objectives, a finite element based computational model was developed using one of the popular simulating software ABAQUS CAE. This model was then validated by utilizing the results reported in experimental investigation-based article of Chen and Wang.

A CMIP6 multi-model based analysis of potential climate change effects on watershed runoff using SWAT model: A case study of kunhar river basin, Pakistan.

The hydrological regimes of watersheds might be drastically altered by climate change, a majority of Pakistan's watersheds are experiencing problems with water quality and quantity as a result precipitation changes and temperature, necessitating evaluation and alterations to management strategies. In this study, the regional water security in northern Pakistan is examined about anthropogenic climate change on runoff in the Kunhar River Basin (KRB), a typical river in northern Pakistan using Soil and Water Assessment tool (SWAT) and flow durarion curve (FDC). Nine general circulation models (GCMs) were successfully utilized following bias correction under two latest IPCC shared socioeconomic pathways (SSPs) emission scenarios.

Forecasting the strength of preplaced aggregate concrete using interpretable machine learning approaches.

Preplaced aggregate concrete (PAC) also known as two-stage concrete (TSC) is widely used in construction engineering for various applications. To produce PAC, a mixture of Portland cement, sand, and admixtures is injected into a mold subsequent to the deposition of coarse aggregate. This process complicates the prediction of compressive strength (CS), demanding thorough investigation.

Examining the benefits, challenges, and drivers of open user innovation in small and medium-sized enterprises operating in low R&D industries.

Recent studies have indicated that many challenges exist in implementing open user innovation in SMEs. As a more advanced paradigm of traditional innovation, open user innovations are developed by users and other stakeholders who share tasks and costs of innovation development and then freely unwrap results. The work presented in this article examines the main factors driving open user innovation in SMEs, operating in industries with low investment in R&D.

Utilization of discarded face masks in combination with recycled concrete aggregate and silica fume for sustainable civil construction projects.

The coronavirus (COVID-19) pandemic has not only had a severe impact on global health but also poses a threat to the environment. This research aims to explore an innovative approach to address the issue of increased waste generated by the pandemic. Specifically, the study investigates the utilization of discarded face masks in combination with recycled concrete aggregate (RCA) and Silica Fume (SFM) in civil construction projects.

Bio-inspired based meta-heuristic approach for predicting the strength of fiber-reinforced based strain hardening cementitious composites.

A recently introduced bendable concrete having hundred times greater strain capacity provides promising results in repair of engineering structures, known as strain hardening cementitious composites (SHHCs). The current research creates new empirical prediction models to assess the mechanical properties of strain-hardening cementitious composites (SHCCs) i.e.

Empirical models for compressive and tensile strength of basalt fiber reinforced concrete.

When molten magma solidifies, basalt fiber (BF) is produced as a byproduct. Due to its remaining pollutants that could affect the environment, it is regarded as a waste product. To determine the compressive strength (CS) and tensile strength (TS) of basalt fiber reinforced concrete (BFRC), this study will develop empirical models using gene expression programming (GEP), Artificial Neural Network (ANN) and Extreme Gradient Boosting (XG Boost).

Predicting compressive strength of eco-friendly plastic sand paver blocks using gene expression and artificial intelligence programming.

Plastic sand paver blocks provide a sustainable alternative by using plastic waste and reducing the need for cement. This innovative approach leads to a more sustainable construction sector by promoting environmental preservation. No model or Equation has been devised that can predict the compressive strength of these blocks.

Experimental study on the eco-friendly plastic-sand paver blocks by utilising plastic waste and basalt fibers.

Plastic waste poses a significant hazard to the environment as a result of its high production rates, which endanger both the environment and its inhabitants. Similarly, another concern is the production of cement, which accounts for roughly 8% of global CO emissions. Thus, recycling plastic waste as a replacement for cementitious materials may be a more effective strategy for waste minimisation and cement elimination.

A scientometric analysis approach on the plastic sand.

The purpose of this research was to conduct a scientometric evaluation of the literature pertaining to plastic sand in order to evaluate its many aspects. Conventional review studies have several limitations when it comes to their capacity to completely and properly link different sections of the published research. Some of the more complicated features of advanced research are co-occurrence analysis, science mapping and co-citation analysis.

Analysis of the relationship among land surface temperature (LST), land use land cover (LULC), and normalized difference vegetation index (NDVI) with topographic elements in the lower Himalayan region.

Land Surface Temperature (LST) affects exchange of energy between earth surface and atmosphere which is important for studying environmental changes. However, research on the relationship between LST, Land Use Land Cover (LULC), and Normalized Difference Vegetation Index (NDVI) with topographic elements in the lower Himalayan region has not been done. Therefore, the present study explored the relationship between LST and NDVI, and LULC types with topographic elements in the lower Himalayan region of Pakistan.

Self-Healing Bio-Concrete Using Encapsulated in Iron Oxide Nanoparticles.

For the creation of healable cement concrete matrix, microbial self-healing solutions are significantly more creative and potentially successful. The current study investigates whether gram-positive "" () microorganisms can effectively repair structural and non-structural cracks caused at the nano- and microscale. By creating an effective immobilization strategy in a coherent manner, the primary challenge regarding the viability of such microbes in a concrete mixture atmosphere has been successfully fulfilled.

Prediction of Autogenous Shrinkage of Concrete Incorporating Super Absorbent Polymer and Waste Materials through Individual and Ensemble Machine Learning Approaches.

The use of superabsorbent polymers, sometimes known as SAP, is a tremendously efficacious method for reducing the amount of autogenous shrinkage (AS) that occurs in high-performance concrete. This study utilizes support vector regression (SVR) as a standalone machine-learning algorithm (MLA) which is then ensemble with boosting and bagging approaches to reduce the bias and overfitting issues. In addition, these ensemble methods are optimized with twenty sub-models with varying the n estimators to achieve a robust R.

Evaluation of Moisture Damage Potential in Hot Mix Asphalt Using Polymeric Aggregate Treatment.

To enhance the moisture damage performance of hot mix asphalt (HMA), treating the aggregate surface with a suitable additive was a more convenient approach. In this research, two types of aggregate modifiers were used to study the effect of moisture damage on HMA. Three different aggregate sources were selected based on their abundance of use in HMA.

A Scientometric Review on Mapping Research Knowledge for 3D Printing Concrete.

The scientometric analysis is statistical scrutiny of books, papers, and other publications to assess the "output" of individuals/research teams, organizations, and nations, to identify national and worldwide networks, and to map the creation of new (multi-disciplinary) scientific and technological fields that would be beneficial for the new researchers in the particular field. A scientometric review of 3D printing concrete is carried out in this study to explore the different literature aspects. There are limitations in conventional and typical review studies regarding the capacity of such studies to link various elements of the literature accurately and comprehensively.

Forecasting Compressive Strength of RHA Based Concrete Using Multi-Expression Programming.

Rice husk ash (RHA) is a significant pollutant produced by agricultural sectors that cause a malignant outcome to the environment. To encourage the re-use of RHA, this work used multi expression programming (MEP) to construct an empirical model for forecasting the compressive nature of concrete made with RHA (CRHA) as a cement substitute. Thus, the compressive strength of CRHA was developed comprising of 192 findings from the broad and trustworthy database obtained from literature review.

Compressive Strength Estimation of Geopolymer Composites through Novel Computational Approaches.

The application of artificial intelligence approaches like machine learning (ML) to forecast material properties is an effective strategy to reduce multiple trials during experimentation. This study performed ML modeling on 481 mixes of geopolymer concrete with nine input variables, including curing time, curing temperature, specimen age, alkali/fly ash ratio, NaSiO/NaOH ratio, NaOH molarity, aggregate volume, superplasticizer, and water, with CS as the output variable. Four types of ML models were employed to anticipate the compressive strength of geopolymer concrete, and their performance was compared to find out the most accurate ML model.