Integrated Evaporator for Efficient Solar-Driven Interfacial Steam Generation.

Solar-driven interfacial steam generation is a promising technique for clean water production because it can minimize thermal loss by localizing solar-to-heat conversion at the air/liquid interface. Here we report an integrated solar evaporator by partially growing 2D polypyrrole microsheets within a melamine foam through chemical vapor polymerization. These microsheets can induce multiple light reflections within the foam, enable omnidirectional light absorption, provide abundant surfaces to promote heat transfer, and achieve spatially defined hydrophobicity to facilitate vapor escape.

Biodegradable nano-organosilica gene carrier for high-efficiency gene transfection.

Finding and exploiting safe and high-efficiency gene carriers have always been critical tasks for gene therapy. In this work, novel GSH-triggered degradable organosilica nanoparticles grafted with guanidinated-fluorinated α-polylysine (o-SiNP-GF) are prepared to be studied as gene carriers. The organosilica matrix of o-SiNP-GF is synthesized through the hydrolysis and condensation of 1,2-bis(triethoxysilyl)ethane (BTSE) and bis[3-(triethoxysilyl)propyl]tetrasulfide (BTSPTS).

Fabrication of inverse-opal lysozyme-imprinted polydopamine/polypyrrole microspheres with near-infrared-light-controlled release property.

The combination of the molecular imprinting technology and porous materials is a promising way to obtain high-efficient selective adsorption and separation materials for bioactive macromolecules. In this work, we developed a novel approach to prepare near-infrared (NIR)-light-response inverse-opal lysozyme (Lyz)-imprinted polydopamine/polypyrrole (IO-PDA/PPy-MIP) composite microspheres using micron-sized SiO colloidal crystal microspheres as the sacrificed template. The pore size of the IO-PDA/PPy-MIP microspheres can be tuned from 200 to 800 nm by the size of silica nanoparticles which self-assemble to form the template SiO colloidal crystal microspheres.

Space-Confined Seeded Growth of Black Silver Nanostructures for Solar Steam Generation.

Plasmonic metal nanostructures have attracted considerable attention for solar energy harvesting due to their capability in photothermal conversion. However, the narrow resonant band of the conventional plasmonic nanoparticles greatly limits their application as only a small fraction of the solar energy can be utilized. Herein, a unique confined seeded growth strategy is developed to synthesize black silver nanostructures with broadband absorption in the visible and near-infrared spectrum.

Emerging Multifunctional NIR Photothermal Therapy Systems Based on Polypyrrole Nanoparticles.

Near-infrared (NIR)-light-triggered therapy platforms are now considered as a new and exciting possibility for clinical nanomedicine applications. As a promising photothermal agent, polypyrrole (PPy) nanoparticles have been extensively studied for the hyperthermia in cancer therapy due to their strong NIR light photothermal effect and excellent biocompatibility. However, the photothermal application of PPy based nanomaterials is still in its preliminary stage.

Chitosan-based core-shell structured particles for in vivo sustainable gene transfection.

A core-shell structured chitosan (CS)-based gene vector with a sustainable gene transfection effect was designed and successfully prepared in this study. The pEGFP was first combined with the thiolated and N-alkylated chitosan (TACS). Then, hydroxybutyl chitosan grafted with poly(ethylene glycol) (EG-HBC) was coated on the pEGFP-loaded TACS particles.

The preparation, drug loading and in vitro NIR photothermal-controlled release behavior of raspberry-like hollow polypyrrole microspheres.

The combination of NIR photothermal therapy and chemotherapy is considered as the promising technique for future cancer therapy. The key point of this technique is the design and synthesis of photothermal agents with high-efficiency photothermal effects and high chemical drug loading capacity. Herein, submicron-sized raspberry-like hollow-structured polypyrrole microspheres (H-PPy) were facilely prepared through in situ polymerization of pyrrole on monodispersed polystyrene (PS) template microspheres with a diameter of 220 nm, followed by the chemical etching of PS templates.

Fabrication of High-Performance Magnetic Lysozyme-Imprinted Microsphere and Its NIR-Responsive Controlled Release Property.

The preparation of efficient and practical biomacromolecules imprinted polymer materials is still a challenging task because of the spatial hindrance caused by the large size of template and target molecules in the imprinting and recognition process. Herein, we provided a novel pathway to coat a NIR-light responsive lysozyme-imprinted polydopamine (PDA) layer on a fibrous SiO2 (F-SiO2) microsphere grown up from a magnetic Fe3O4 core nanoparticle. The magnetic core-shell structured lysozyme-imprinted Fe3O4@F-SiO2@PDA microspheres (MIP-lysozyme) can be easily separated by a magnet and have a high saturation adsorption capacity of lysozyme of 700 mg/g within 30 min because of the high surface area of 570 m(2)/g and the mesopore size of 12 nm of the Fe3O4@F-SiO2 support.

Fabrication of fibrous amidoxime-functionalized mesoporous silica microsphere and its selectively adsorption property for Pb(2+) in aqueous solution.

Fibrous cyano-modified mesoporous SiO2 microspheres with specific surface area of ca. 300 m(2) g(-1) have been successfully fabricated respectively by in-situ synthesis and post-modification methods, based on the hydrolysis of ethyl silicate in the presence of (2-cyanoethyl)triethoxysilane at a certain condition. TEM observations show that the average diameters of the prepared fibrous cyano-modified SiO2 microspheres by these two methods are 68 and 211 nm, respectively.

The sustained-release behavior and in vitro and in vivo transfection of pEGFP-loaded core-shell-structured chitosan-based composite particles.

Novel submicron core-shell-structured chitosan-based composite particles encapsulated with enhanced green fluorescent protein plasmids (pEGFP) were prepared by complex coacervation method. The core was pEGFP-loaded thiolated N-alkylated chitosan (TACS) and the shell was pH- and temperature-responsive hydroxybutyl chitosan (HBC). pEGFP-loaded TACS-HBC composite particles were spherical, and had a mean diameter of approximately 120 nm, as measured by transmission electron microscopy and particle size analyzer.

Fabrication of superhydrophobic three-dimensionally ordered macroporous polytetrafluoroethylene films and its application.

Three-dimensionally ordered macroporous (3DOM) polytetrafluoroethylene (PTFE) has hardly been prepared due to the poor solubility in most of solvents and high melting temperature of PTFE raw material. In this work, monodispersed polystyrene (PS) microspheres and PTFE latex particles were controlled to simultaneously deposit from water. After the deposits were calcinated at 400 °C, a self-supported superhydrophobic 3DOM PTFE film with a static water contact angle of 154° was successfully fabricated.

A new method to cross-link a polyplex for enhancing in vivo stability and transfection efficiency.

Disulfide-exchange was found to cross-link the polyplex of disulfide-containing poly(amido amine) and pDNA with heating of the polyplex solution over a short time. The cross-linked polyplexes based on disulfide-containing poly(amido amine) have excellent stability under physiological salt conditions, and have significantly enhanced transfection activity in the serum media compared to non-cross-linked polyplexes. In vivo, ICR mice were injected with the polyplex through the tail vein, the results show that the transfection efficiency of the cross-linked polyplex is higher than that of the non-cross-linked variety.

Formation of cagelike sulfonated polystyrene microspheres via swelling-osmosis process and loading of CdS nanoparticles.

In this report, we studied the formation mechanism of cagelike polymer microspheres fabricated conveniently and efficiently through a swelling-osmosis process of sulfonated polystyrene (SPS) microspheres in a ternary mixed solvent (water/ethanol/heptane). The scanning electron microscopy and transmission electron microscopy observations indicated that the morphology of the final cagelike SPS microspheres is mainly controlled by the composition of the mixed solvent and the swelling temperature. Considering the solubility parameters of related reagents and the low interface tension of heptane and the aqueous solution of ethanol (only 6.

Morphological control of multihollow polymer latex particles through a controlled phase separation in the seeded emulsion polymerization.

In this work, we first reported that the phase separation can take place both inside and outside of a multihollow-structured cross-linked seed microspheres swollen by styrene monomers in water during the radiation-induced seeded emulsion polymerization. The phase separation process in these two opposite directions will determine the morphology of final latex particles. First, sulfonated cross-linked polystyrene (SCPS) seed microspheres were swollen by styrene in water.

The unfolding of G-quadruplexes and its adverse effect on DNA-gold nanoparticles-based sensing system.

The adsorption of DNAs in G-quadruplex solution onto 13 nm gold nanoparticles (AuNPs) was studied through monitoring of the localized surface plasmon resonance (LSPR) absorbance of 13 nm AuNPs at 520 and 650 nm (A650/A520) in the solutions of three widely studied guanine-rich sequences, TBA(5'-GGTTGGTGTGGTTGG-3'), PW17(5'-GGGTAGGGCGGGTTGGG-3'), and PSO (5'-GGGTTAGGGTTAGGGTTAGGG-3'). It was found that the degree of adsorption of DNAs in Pb(2+) stabilized G-quadruplex (G-Pb(2+)) solutions is up to 93% after more than 5h of incubation. Furthermore, the lead concentrations in the solutions containing G-quadruplex and AuNP were analyzed by an inductively coupled plasma atomic emission spectrometer.

A target-triggered strand displacement reaction cycle: the design and application in adenosine triphosphate sensing.

A strand displacement reaction (SDR) system that runs solely on oligonucleotides has been developed for the amplification detection of adenosine triphosphate (ATP). It involves a target-induced SDR and an entropy-driven catalytic cycle of two SDRs with five oligonucleotides, denoted as substrate, fuel, catalyst, C-1, and C-2. Catalyst, released from the ATP aptamer-catalyst duplex by ATP molecule, catalyzes the SDRs to finally form the substrate-fuel duplex.

Double-functionalized gold nanoparticles with split aptamer for the detection of adenosine triphosphate.

A newly designed functionalization type for gold nanoparticles (AuNP) with split aptamer has been developed for the detection of adenosine triphosphate (ATP). The ATP aptamer was split into two parts with their 5' prime or 3' prime modified with thiol. Both the 5' SH and 3' SH modified strands for each split aptamer fragment were functionalized onto the same AuNP to construct double-functionalized AuNP-DNA conjugates.

Synthesis of anisotropic polymer/inorganic particles via asymmetric swelling-dissolving process.

In this work, an asymmetric swelling-dissolving process of original submicrometer-sized decentered sulfonated polystyrene/silica (SPS/silica) particles in a ternary mixed solvent (water/ethanol/heptane) was first reported. Actinia-like and porous snowman-like SPS/silica composite particles are fabricated through tuning the composition of the ternary mixed solvent. Actinia-like particles, with a silica core embedded in a "blooming" SPS matrix, are obtained when the composition of the mixed solvent is 5 g/5 g/0.

Synthesis and characterization of β-CD-coated polystyrene microspheres by γ-ray radiation emulsion polymerization.

Polystyrene (PS) microspheres coated with β-cyclodextrin (β-CD) were fabricated via γ-ray-induced emulsion polymerization in a ternary system of styrene/β-CD/water (St/β-CD/water). The solid inclusion complex of St and β-CD particles formed at the St droplets-water interface can stabilize the emulsion as the surfactant. TEM and XPS results showed that β-CD remains on the surface of PS particles.

Fabrication and morphology of spongelike polymer material based on cross-linked sulfonated polystyrene particles.

A novel spongelike polymer material has been fabricated by γ-ray induced polymerization of methylmethacrylate (MMA) in an emulsion containing cross-linked sulfonated polystyrene (CSP) particles. Scanning electron microscopy (SEM) images reveal that the spongelike structure is made up of interlinked nanosized PMMA particles with micrometer-sized CSP-PMMA particles embedded inside. The nitrogen adsorption isotherm discloses that the spongelike material has a high specific surface area of 29 m(2)/g and a narrow pore size distribution of 60-120 nm.

One-pot synthesis of colloidal nanobowls and hybrid multipod-like nanoparticles by radiation miniemulsion polymerization.

A facile approach is proposed to one-pot synthesis of two kinds of nanoparticles: a new type of PS nanobowls (a hole appearing at the bottom of nanobowl) and PS/silica hybrid multipod-like nanoparticles. The two type of nanoparticles generated together during polymerization could be separated easily by centrifugation. Furthermore, the structure of nanobowls could be easily controlled by the weight ratio of monomer/silica.

Facile fabrication of free-standing colloidal-crystal films by interfacial self-assembly.

This paper reports a rapid and facile method of preparing free-standing colloidal crystals from monodisperse charged polystyrene (PS) microspheres. Mixed solvents (ethanol/water) were used as the dispersion medium in the self-assembly process of colloidal crystals. By a simple "floating self-assembly" method, PS microspheres floated on the surface of liquid and self-assembled into large area of three-dimensional (3D) ordered colloidal crystals within 15 min.

Hybrid hollow microspheres templated from double Pickering emulsions.

Hybrid hollow microspheres are fabricated successfully from double emulsions stabilized by single-component amphiphilic silica nanoparticles, which were formed and partially modified in situ at the interface of water-in-oil emulsions.

Novel walnut-like multihollow polymer particles: synthesis and morphology control.

Novel walnut-like multihollow polymer particles were first prepared by gamma-ray radiation emulsion polymerization using cross-linked and sulfonated polystyrene spheres (CSPs) as the template. The formation process was studied in detail, and the morphology of walnut-like multihollow polystyrene particles could be controlled by the content of cross-linking agent, sulfonation time of CSP particles, and the weight ratio of monomer/CSP. In addition, an application of walnut multihollow polymer particles on bonding Ag nanoparticles onto the surface was achieved, which could be extended to other noble metal nanoparticles and could have a wide range of potential applications, such as catalysts, sensors, solar cells, and photonic crystals.