Broadband THz emission of long pulses from photomixing process with optical chirped pulses.

Terahertz (THz) generation via photomixing on photoconductive antenna using twin delayed chirped pulses provides a long THz pulse with a narrow bandwidth. To generate a long pulse with a broad bandwidth, we propose a new, to the best of our knowledge, method that combines two long optical pulses with opposite chirps. The pulses exhibit temporal distributions of their instantaneous frequencies with opposite slopes.

Terahertz time-domain spectro-imaging and hyperspectral imagery to investigate a historical Longwy glazed ceramic.

In this paper, we present the potential of Terahertz Time-Domain Imaging (THz-TDI) as a tool to perform non-invasive 3D analysis of an ancient enamel plate manufactured by Longwy Company in France. The THz data collected in the reflection mode were processed using noise filtering procedures and an advanced imaging approach. The results validate the capability to identify glaze layers and the thickness of ceramic materials.

Terahertz diffractive imaging with saturated data inpainting.

Multiplane iterative phase retrieval is a promising approach to diffraction imaging, which accurately determines the topographic and internal characteristics of various objects. Nevertheless, the detection systems used often have a limited dynamic range, resulting in overexposure of recorded intensity distributions. In this Letter, we present a novel, to the best of our knowledge, reconstruction algorithm that inpaints saturated areas on the measured intensity datasets and reliably retrieves wave complex amplitude.

Noise analysis in a seeded four-wave mixing process generated in a photonic crystal fiber pumped by a chirped pulse.

Four-wave mixing is investigated when chirped pump and signal pulses are injected in a photonic crystal fiber. The shot-to-shot stability of the amplified coherent signal was measured by using the dispersive Fourier transform method and compared with numerical simulations. We highlight that the signal-to-noise ratio (SNR) of the pulsed signal increases with the injected power and show that it is not deteriorated through the amplification when the fiber optical parametric amplifier is strongly saturated.

Terahertz Nondestructive Testing with Ultra-Wideband FMCW Radar.

This paper presents the development, performance, integration, and implementation of a 150 GHz FMCW radar based on a homodyne harmonic mixing scheme for noncontact, nondestructive testing. This system offers high-dynamic-range measurement capabilities up to 100 dB and measurement rates up to 7.62 kHz.

Terahertz refractive index-based morphological dilation for breast carcinoma delineation.

This paper reports investigations led on the combination of the refractive index and morphological dilation to enhance performances towards breast tumour margin delineation during conserving surgeries. The refractive index map of invasive ductal and lobular carcinomas were constructed from an inverse electromagnetic problem. Morphological dilation combined with refractive index thresholding was conducted to classify the tissue regions as malignant or benign.

Terahertz phase retrieval imaging in reflection.

Terahertz phase retrieval is a promising technique able to assess the complex diffracted wave properties through an iterative processing algorithm. In this Letter, we demonstrate the implementation of this technique in reflection geometry with a continuous wave acquisition system working at 0.287 THz.

A Versatile Illumination System for Real-Time Terahertz Imaging.

Terahertz technologies are attracting strong interest from high-end industrial fields, and particularly for non-destructive-testing purposes. Currently lacking compactness, integrability as well as adaptability for those implementations, the development and commercialisation of more efficient sources and detectors progressively ensure the transition toward applicative implementations, especially for real-time full-field imaging. In this work, a flexible illumination system, based on fast beam steering has been developed and characterized.

Guided terahertz pulse reflectometry with double photoconductive antenna.

Developments toward the implementation of a terahertz pulse imaging system within a guided reflectometry configuration are reported. Two photoconductive antennas patterned on the same LT-GaAs active layer in association with a silica pipe hollow-core waveguide allowed us to obtain a guided optics-free imager. Besides working in a pulsed regime, the setup does not require additional optics to focus and couple the terahertz pulses into the waveguide core, simplifying the global implementation in comparison with other reported guided terahertz reflectometry systems.

Shape-from-focus for real-time terahertz 3D imaging.

Thanks to significant advances in real-time terahertz imaging in terms of resolution and image quality, adapting and extending optical methods for 3D imaging at the millimeter scale is now promising. The shape-from-focus algorithm is a post-processing tool used in optical microscopy to reconstruct the external shape surface of a convex surface object. Images acquired at different distances from the object-side focal plane are implemented in this algorithm.

Terahertz Spectroscopy and Quantum Mechanical Simulations of Crystalline Copper-Containing Historical Pigments.

Terahertz spectroscopy, a noninvasive and nondestructive analytical technique used in art conservation and restoration, can provide compelling data concerning the composition and condition of culturally valuable and historical objects. Terahertz spectral databases of modern and ancient artists' pigments exist but lack explanations for the origins of the unique spectral features. Solid-state density functional theory simulations can provide insight into the molecular and intermolecular forces that dominate the observed absorption features as well as reveal deviations from simple harmonic vibrational behavior that can complicate these spectra.

Pilot study of freshly excised breast tissue response in the 300-600 GHz range.

The failure to accurately define tumor margins during breast conserving surgery (BCS) results in a 20% re-excision rate. The present paper reports the investigation to evaluate the potential of terahertz imaging for breast tissue recognition within the under-explored 300 - 600 GHz range. Such a frequency window matches new BiCMOS technology capabilities and thus opens up the opportunity for near-field terahertz imaging using these devices.

Terahertz frequency modulated continuous wave imaging advanced data processing for art painting analysis.

Reflection terahertz frequency modulated continuous waves scanner (300 GHz) has been proficiently optimized for imaging two easel paintings of different age. The information content of the obtained THz images has been fully inspected by selecting the appropriate THz image parameter. At the same time, a new data processing has been developed for improving the level of detail held by the axial parametric THz images by means of Gaussian fit of the reflected signals.

Liquid index matching for 2D and 3D terahertz imaging.

Two-dimensional (2D) terahertz imaging and 3D visualization suffer from severe artifacts since an important part of the terahertz beam is reflected, diffracted, and refracted at each interface. These phenomena are due to refractive index mismatch and reflection in the case of non-orthogonal incidence. This paper proposes an experimental procedure that reduces these deleterious optical refraction effects for a cylinder and a prism made with polyethylene material.

Bulk magnetic terahertz metamaterials based on dielectric microspheres.

Rigid metamaterials were prepared by embedding TiO microspheres into polyethylene. These structures exhibit a series of Mie resonances where the lowest-frequency one is associated with a strong dispersion in the effective magnetic permeability. Using time-domain terahertz spectroscopy, we experimentally demonstrated the magnetic nature of the observed resonance.

Terahertz imaging and tomography as efficient instruments for testing polymer additive manufacturing objects.

Additive manufacturing (AM) technology is not only used to make 3D objects but also for rapid prototyping. In industry and laboratories, quality controls for these objects are necessary though difficult to implement compared to classical methods of fabrication because the layer-by-layer printing allows for very complex object manufacturing that is unachievable with standard tools. Furthermore, AM can induce unknown or unexpected defects.

Quantitative Analysis of Hexahydro-1,3,5-trinitro-1,3,5, Triazine/Pentaerythritol Tetranitrate (RDX-PETN) Mixtures by Terahertz Time Domain Spectroscopy.

Absorption spectra of explosives such as hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), pentaerythritol tetranitrate (PETN), and mixtures of both were measured by terahertz time domain spectroscopy (THz-TDS). Chemometrics was applied to quantitative analysis of terahertz absorbance spectra obtained in transmission mode to predict the relative amounts of RDX and PETN in samples containing pure components or their mixtures. This analysis was challenging because significant spectral overlap prevented identification of each product fingerprint.

Low-frequency noise effect on terahertz tomography using thermal detectors.

In this paper, the impact of low-frequency noise on terahertz-computed tomography (THz-CT) is analyzed for several measurement configurations and pyroelectric detectors. We acquire real noise data from a continuous millimeter-wave tomographic scanner in order to figure out its impact on reconstructed images. Second, noise characteristics are quantified according to two distinct acquisition methods by (i) extrapolating from experimental acquisitions a sinogram for different noise backgrounds and (ii) reconstructing the corresponding spatial distributions in a slice using a CT reconstruction algorithm.

Ordered subsets convex algorithm for 3D terahertz transmission tomography.

We investigate in this paper a new reconstruction method in order to perform 3D Terahertz (THz) tomography using a continuous wave acquisition setup in transmission mode. This method is based on the Maximum Likelihood for TRansmission tomography (ML-TR) first developed for X-ray imaging. We optimize the Ordered Subsets Convex (OSC) implementation of the ML-TR by including the Gaussian propagation model of THz waves and take into account the intensity distributions of both blank calibration scan and dark-field measured on THz detectors.

Near-field probing of Mie resonances in single TiO2 microspheres at terahertz frequencies.

We show experimentally that poly-crystalline TiO2 spheres, 20-30 μm in diameter, exhibit a magnetic dipole Mie resonance in the terahertz (THz) frequency band (1.0-1.6 THz) with a narrow line-width (<40 GHz).

Chemometrics applied to quantitative analysis of ternary mixtures by terahertz spectroscopy.

Chemometrics was applied to qualitative and quantitative analyses of terahertz spectra obtained in transmission mode. A series of mixtures of three pure analytes, namely, citric acid, D-(-)fructose, and α-lactose monohydrate under various concentrations, was prepared as pressed pellets with polyethylene as binder. Then, terahertz absorbance spectra were recorded by terahertz time domain spectroscopy and analyzed.

Examination of femtosecond laser matter interaction in multipulse regime for surface nanopatterning of vitreous substrates.

The paper presents our results on laser micro- and nanostructuring of sodium aluminosilicate glass for the permanent storage purposes and photonics applications. Surface structuring is realized by fs laser irradiation followed by the subsequent etching in a potassium hydroxide (10M@80 °C) for 1 to 10 minutes. As the energy deposited is lower than the damage and/or ablation threshold, the chemical etching permits to produce small craters in the laser modified region.

Ultra-flexible multiband terahertz metamaterial absorber for conformal geometry applications.

Standard optical lithography relying on clean room and microelectronic facilities is used to fabricate a thin-flexible metamaterial absorber, designed to operate at submillimeter wavelengths over the 0.1-1 THz frequency band. Large terahertz absorption has been demonstrated numerically and through experimental measurements with a maximum level of about 80%.

Exact statistics of the gap and time interval between the first two maxima of random walks and Lévy flights.

We investigate the statistics of the gap G(n) between the two rightmost positions of a Markovian one-dimensional random walker (RW) after n time steps and of the duration L(n) which separates the occurrence of these two extremal positions. The distribution of the jumps η(i)'s of the RW, f(η), is symmetric and its Fourier transform has the small k behavior 1-f[over ^](k)~|k|(μ), with 0<μ≤2. For μ=2, the RW converges, for large n, to Brownian motion, while for 0<μ<2 it corresponds to a Lévy flight of index μ.

Propagation beam consideration for 3D THz computed tomography.

In this paper, a model of the beam propagation is developed according to the physical properties of THz waves used in THz computed tomography (CT) scan imaging. This model is first included in an acquisition simulator to observe and estimate the impact of the Gaussian beam intensity profile on the projection sets. Second, the model is introduced in several inversion methods as a convolution filter to perform efficient tomographic reconstructions of simulated and real acquired objects.