Studying the Structure and Properties of Epoxy Composites Modified by Original and Functionalized with Hexamethylenediamine by Electrochemically Synthesized Graphene Oxide.

In this study, we used multilayer graphene oxide (GO) obtained by anodic oxidation of graphite powder in 83% sulfuric acid. The modification of GO was carried out by its interaction with hexamethylenediamine (HMDA) according to the mechanism of nucleophilic substitution between the amino group of HMDA (HMDA) and the epoxy groups of GO, accompanied by partial reduction of multilayer GO and an increase in the deformation of the carbon layers. The structure and properties of modified HMDA-GO were characterized using research methods such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy and Raman spectroscopy.

Investigating the Structure and Properties of Epoxy Nanocomposites Containing Nanodiamonds Modified with Aminoacetic Acid.

This paper presents a study on the prospects of functionalizing nanodiamonds (NDs) with aminoacetic acid to obtain high-strength composites based on an epoxy matrix. The impact of the functionalization of the ND surface with aminoacetic acid in various concentrations on the properties of the epoxy composite was assessed. The success of grafting amine onto the ND surface was confirmed by X-ray phase analysis and IR spectroscopy.

Microwave Modification of an Epoxy Basalt-Filled Oligomer to Improve the Functional Properties of a Composite Based on It.

The purpose of this work is to study the influence of the electric field strength of an electromagnetic wave with the maximum modifying effect on an epoxy basalt-filled oligomer, which is of great scientific and practical importance for the development of microwave oligomer modification technology. The optimal modes of microwave modification, under which the highest values of the mechanical properties of an epoxy basalt-filled polymer composite material are obtained, are identified: power of 400 W and an exposure time of 24 s. At the same time, the breaking stress in bending increases by 20%, the impact strength increases by 2 times, and hardness increases by 31%.

Peroneal Pathology in the Athlete.

The peroneal tendons play a critical role in stabilizing the foot and ankle especially in athletes with high demands on lateral ankle strength. A complete understanding of the anatomy of the lateral ankle as well as a careful physical examination is imperative to diagnosing peroneal pathology, which is commonly misdiagnosed and can lead to chronic pain and inability to perform high level sport. Although low-demand patients do well with a conservative approach, most high-demand athletes will benefit from surgical intervention.

Effect of Microwave Irradiation at Different Stages of Manufacturing Unsaturated Polyester Nanocomposite.

The possibility of using microwave radiation at various stages of obtaining an unsaturated polyester composite modified with carbon nanotubes was studied. The optimal content of MWCNTs in the system was experimentally selected, having the best effect on the strength of the composite. The effect of the microwave field on the properties of a polyester composite during the microwave treatment of an oligomer, a polymerized composite, and MWCNTs before their addition into the oligomer was studied.

Reinforced Epoxy Composites Modified with Functionalized Graphene Oxide.

The possibility of using graphene oxide as a modifying additive for polymer fiber-reinforced composites based on epoxy resin and basalt roving has been studied. The content of graphene oxide in the system has been experimentally selected, which has the best effect on the physico-mechanical properties of the obtained polymer composite material. The efficiency of the modification of the graphene oxide surface with APTES finishing additives and aminoacetic acid, which provides chemical interaction at the polymer matrix-filler interface, has been considered.

Electrodeposition and Corrosion Properties of Nickel-Graphene Oxide Composite Coatings.

Nickel-based composite electrochemical coatings (CEC) modified with multilayer graphene oxide (GO) were obtained from a sulfate-chloride electrolyte in the reverse electrolysis mode. The microstructure of these CECs was investigated by X-ray phase analysis and scanning electron microscopy. The corrosion-electrochemical behavior of nickel-GO composite coatings in a 0.

Development and Analysis of the Physicochemical and Mechanical Properties of Diorite-Reinforced Epoxy Composites.

The aim of this paper is to study the effect of a polyfunctional modifier oligo (resorcinol phenyl phosphate) with terminal phenyl groups and a dispersed mineral filler, diorite, on the physicochemical and deformation-strength properties of epoxy-based composites. The efficiency of using diorite as an active filler of an epoxy polymer, ensuring an increase in strength and a change in the physicochemical properties of epoxy composites, has been proven. We selected the optimal content of diorite both as a structuring additive and as a filler in the composition of the epoxy composite (0.

Epoxy Nanocomposites Reinforced with Functionalized Carbon Nanotubes.

In this article, amino functionalized multiwalled carbon nanotubes (MWCNTs) were prepared by chemical modification of the surface of a MWCNTs using γ-aminopropyltriethoxysilane (APTES) and dispersed into the epoxy composition. The modifying agent (APTES) was directly deposited on the MWCNTs surfaces. For the functionalization of MWCNTs, was used not the APTES concentrate, as it had been described in previous works, but its freshly prepared aqueous solution.

Reinforcing effects of aminosilane-functionalized h-BN on the physicochemical and mechanical behaviors of epoxy nanocomposites.

The results of this study confirm the possibility of the directional regulation of operational properties of epoxy composites by the use of small additives of hexagonal boron nitride (h-BN), providing the creation of epoxy composites with high performance properties. The effectiveness of h-BN surface modification by γ-aminopropyltriethoxysilane and the formation of strong chemical bonds at the polymer matrix/filler interface has been proved, which ensures an increase in physico-mechanical characteristics of epoxy composites: bending stress increases by 142% and bending modulus increases by 52%, strength increases by 53% and tensile elastic modulus increases by 37%, toughness increases by 400% and Brinell hardness increases by 96%, compared with an unfilled plasticized epoxy composite.

Reinforcement of Epoxy Composites with Application of Finely-ground Ochre and Electrophysical Method of the Composition Modification.

The conducted studies have proven the possibility of the directed control of operational properties of epoxy composites, due to the addition of finely-ground ocher into their composition, and the use of microwave modification of the epoxy composition. The rational content of ocher as a modifying additive (0.5 parts by mass) and a filler (75 parts by mass) of the epoxy composition has been selected, which ensures the improvement of the studied complex of physical-mechanical properties.

Reinforcement of Epoxy Composites with Graphite-Graphene Structures.

As a result of the research, the possibility of directional control of the operational properties of epoxy composites by the use of small additives of thermally expanded graphite-graphene structures has been proved. The rational content of the structuring additive in the composition of the epoxy composite (0.05 parts by mass.

[Intrahepatic bile duct hyperplasia in a baby with partial trisomy of the long arm of 17 chromosome].

The paper describes a clinical and anatomical case of partial trisomy of the long arm of 17 chromosome in a baby aged 1 month and 4 days with the karyotype 46,XY, dup(17)(q21q24) from a dichorionic diamniotic twin born after in vitro fertilization. Intrahepatic bile duct hyperplasia was first detected in the patient with this chromosomal abnormality. Histological and immunohistochemical examinations of the liver were conducted using antibodies to Ki-67, CK-pan, CK8, CK 18, Vim, SMA, CD31, CD34, HER-2/neu.