Viral concentration method biases in the detection of viral profiles in wastewater.

Viral detection methodologies used for wastewater-based epidemiology (WBE) studies have a broad range of efficacies. The complex matrix and low viral particle load in wastewater emphasize the importance of the concentration method. This study focused on comparing three commonly used virus concentration methods: polyethylene glycol precipitation (PEG), immuno-magnetic nanoparticles (IMNP), and electronegative membrane filtration (EMF).

Approaching easy water disinfection for all: Can in situ electrochlorination outperform conventional chlorination under realistic conditions?

Electrochlorination has gained research interest for its potential application as decentralized water treatment. A number of studies have displayed promising efficiency for water disinfection. However, a comprehensive comparison of in situ electrodisinfection to existing disinfection techniques, particularly under realistic water composition and flow rates, still needs additional research efforts.

Impact of Pipe Material and Temperature on Drinking Water Microbiome and Prevalence of , , and Species.

In drinking water distribution systems (DWDSs), pipe material and water temperature are some of the critical factors affecting the microbial flora of water. Six model DWDSs consisting of three pipe materials (galvanized steel, copper, and PEX) were constructed. The temperature in three systems was maintained at 22 °C and the other 3 at 32 °C to study microbial and elemental contaminants in a 6-week survey using 16S rRNA next-generation sequencing (NGS) and inductively coupled plasma-optical emission spectrometry (ICP-OES).

Strain-Level Characterization of Environmental Isolates via MALDI-TOF-MS.

As a waterborne pathogen of increasing concern, techniques for cost-effective and rapid characterization of are vital. This study examines the development of a Matrix Assisted Laser Desorption/Ionization-Time of Flight Mass Spectrometry (MALDI-TOF-MS) analysis methodology for this microbe. First, optimal sample preparation methods for the analysis of environmental isolates via MALDI-TOF-MS were determined.

Implication of cell culture methods and biases on UV inactivation of viruses.

Inactivation of human respiratory viruses in air and on surfaces is important to control their spread. Exposure to germicidal ultraviolet (UV-C) light damages viral nucleic acid rendering them non-infectious. Most of the recent viral inactivation studies have not considered potential artifacts caused by interactions between UV-C light and culture media used to suspend and deposit virus on surfaces.

Occurrence beyond Cooling Towers and Premise Plumbing.

is an environmental pathogen that is responsible for respiratory disease and is a common causative agent of water-related outbreaks. Due to their ability to survive in a broad range of environments, transmission of legionellosis is possible from a variety of sources. Unfortunately, a disproportionate amount of research that is devoted to studying the occurrence of in environmental reservoirs is aimed toward cooling towers and premise plumbing.

Portable point-of-use photoelectrocatalytic device provides rapid water disinfection.

Portable water purification devices are needed to provide safe drinking water in rural communities, developing communities with low quality centralized water distribution, and military or recreational applications. Filtration, ultraviolet light, or chemical additives provide a spectrum of alternatives to remove pathogens from water. For the first time, we design, fabricate and demonstrate the performance of a small portable photoelectric point-of-use device, and document its performance on pathogen inactivation.

Engineered proteoliposome transporter for treatment of cesium contaminated water.

Radioactive cesium (Cs) released from nuclear power plants and nuclear accidents continues to be a worldwide concern, and its removal from water remains a difficult problem. Here, we present the development of an innovative method to remove Cs present at low concentrations in water. To achieve this, a proteoliposome transporter was engineered, composed of a membrane-bound potassium uptake protein, Kup from E.

Nanoparticle and Transparent Polymer Coatings Enable UV-C Side-Emission Optical Fibers for Inactivation of in Water.

Pathogenic bacteria pose a health threat and operational challenge in drinking water. UV-C light-emitting diodes (UV-C LEDs) are becoming a competitive disinfection technology but are limited by their small irradiation area. Side-emitting optical fibers (SEOFs) can serve as a UV-C LED light delivery technology for reactors or tubing.

Physisorption and chemisorption of T4 bacteriophages on amino functionalized silica particles.

Bacteriophages, or phages, are receiving increasing interest as recognition tools for the design of bioactive surfaces. However, to maintain the activity of surface-bound phages, the immobilization strategy must provide the right orientation and not compromise the phages' integrity. The objectives of this study were to characterize the phage sorption capacity and the immobilized phage activity for aminated silica particles functionalized with T4 phages.

Copper nanoparticles toxicity: Laboratory strains verses environmental bacterial isolates.

Nanoparticles have emerged as significant environmental contaminants and their impact has been studied using laboratory strains of bacteria. This study focuses on investigating the response of environmental isolate and laboratory strains of E. coli to 50 and 100 nm size of copper nanoparticles (CuNPs).

Legionella - A threat to groundwater: Pathogen transport in recharge basin.

This study elucidates the potential risk posed by Legionella during aquifer recharge practices. Experiments were conducted using pilot-scale column simulating infiltration of bacterial surrogate and pathogen, E. coli and Legionella pneumophila, under central Arizona recharge basin conditions.

A Strategy to Establish a Quality Assurance/Quality Control Plan for the Application of Biosensors for the Detection of E. coli in Water.

Rapid bacterial detection using biosensors is a novel approach for microbiological testing applications. Validation of such methods is an obstacle in the adoption of new bio-sensing technologies for water testing. Therefore, establishing a quality assurance and quality control (QA/QC) plan is essential to demonstrate accuracy and reliability of the biosensor method for the detection of in drinking water samples.

A tool box strategy using Bacteroides genetic markers to differentiate human from non-human sources of fecal contamination in natural water.

Bacteroides genetic markers have been widely used to identify fecal pollution of water originating from human and animal sources. Many of the assays currently used for detecting human-specific Bacteroides produce false positive results. The focus of this study was to develop a microbial source tracking (MST) tool box strategy for differentiating Bacteroides from human and animal sources.

A biosensor platform for rapid detection of E. coli in drinking water.

There remains a need for rapid, specific and sensitive assays for the detection of bacterial indicators for water quality monitoring. In this study, a strategy for rapid detection of Escherichia coli in drinking water has been developed. This strategy is based on the use of the substrate 4-methylumbelliferyl-β-d-glucuronide (MUG), which is hydrolyzed rapidly by the action of E.

The Impact of Capsid Proteins on Virus Removal and Inactivation During Water Treatment Processes.

This study examined the effect of the amino acid composition of protein capsids on virus inactivation using ultraviolet (UV) irradiation and titanium dioxide photocatalysis, and physical removal via enhanced coagulation using ferric chloride. Although genomic damage is likely more extensive than protein damage for viruses treated using UV, proteins are still substantially degraded. All amino acids demonstrated significant correlations with UV susceptibility.

Impact of environmental factors on legionella populations in drinking water.

To examine the impact of environmental factors on Legionella in drinking water distribution systems, the growth and survival of Legionella under various conditions was studied. When incubated in tap water at 4 °C, 25 °C, and 32 °C, L. pneumophila survival trends varied amongst the temperatures, with the stable populations maintained for months at 25 °C and 32 °C demonstrating that survival is possible at these temperatures for extended periods in oligotrophic conditions.

Automobile windshield washer fluid: A potential source of transmission for Legionella.

Epidemiological evidence suggesting driving cars to be a risk factor for legionellosis has prompted public health studies to investigate vehicle windshield washer fluid as a novel transmission source of this disease. The goal of the current study was to investigate whether or not windshield washer fluid could serve as a potential source of transmission for Legionella. A wide variation in the survival of L.

Stimulation of 2-methylisoborneol (MIB) production by actinomycetes after cyclic chlorination in drinking water distribution systems.

The impact of fluctuation in chlorine residual on actinomycetes and the production of 2-methylisoborneol (MIB) were studied in cast-iron and PVC model distribution systems. Actinomycetes were spiked in each system and continued operation for a 12-day non-chlorine experiment, resulting in no changes in actinomycetes and MIB concentrations. Three cyclic chlorination events were performed and chlorine residuals were maintained as follows: 1.

Occurrence of Noroviruses and Their Correlation with Microbial Indicators in Raw Milk.

This study was conducted to investigate the microbiological quality of raw cow's milk in a collection center in the city of Mashhad, Iran. A total of 19 raw cow's milk samples were collected and simultaneously analyzed for male-specific (F(+)) coliphage and Escherichia coli using culture-based methods and for enteric viruses by reverse transcriptase semi-nested PCR using primer sets specific for human norovirus Group I (HNV-GI), human norovirus Group II (HNV-GII), and enteroviruses (EV). Seven out of 19 (36.

Evaluation of the relationship between bulk organic precursors and disinfection byproduct formation for advanced oxidation processes.

Advanced oxidation processes (AOPs) are gaining traction as they offer mineralization potential rather than transferring contaminants between media. However, AOPs operated with limited energy and/or chemical inputs can exacerbate disinfection byproduct (DBP) formation, even as precursors such as dissolved organic carbon, UV254, and specific UV absorbance (SUVA) decrease. This study examined the relationship between DBP precursors and formation using TiO2 photocatalysis experiments, external AOP and non-AOP data, and predictive DBP models.

Disinfection byproduct formation resulting from settled, filtered, and finished water treated by titanium dioxide photocatalysis.

This study evaluated strategies targeting disinfection byproduct (DBP) mitigation using TiO2 photocatalysis with varying influent water quality. A Purifics Photo-CAT Lab reactor was used to assess total trihalomethane (TTHM) and haloacetic acid (HAA) formation as a function of photocatalytic treatment using water from a conventional coagulation/flocculation/sedimentation process, granular activated carbon filtration, and a DBP hot spot in the water distribution system. Regardless of influent water quality, photocatalysis reduced DBP precursors; however, low-energy limited photocatalysis (<5 kW h m(-3)), exacerbated the production of TTHMs and HAA5s beyond initial levels.

A unified method to process biosolids samples for the recovery of bacterial, viral, and helminths pathogens.

For land application, biosolids are classified as Class A or Class B based on the levels of bacterial, viral, and helminths pathogens in residual biosolids. The current EPA methods for the detection of these groups of pathogens in biosolids include discrete steps. Therefore, a separate sample is processed independently to quantify the number of each group of the pathogens in biosolids.

Isolation of Bacteroides from fish and human fecal samples for identification of unique molecular markers.

Bacteroides molecular markers have been used to identify human fecal contamination in natural waters, but recent work in our laboratory confirmed cross-amplification of several human-specific Bacteroides spp. assays with fecal DNA from fish. For identification of unique molecular markers, Bacteroides from human (n = 4) and fish (n = 7) fecal samples were cultured and their identities were further confirmed using Rapid ID 32A API strips.

Biochemical signature assay for use in a biosensor platform to detect bacteria in drinking water biofilms.

The objective of the study was to identify the enzymatic-biochemical (enz-bio) signatures of Escherichia coli and Salmonella for rapid detection of these bacteria in drinking water biofilms. The relative potency of lipophilic, glucosidic, and proteolytic activities in biofilms containing single bacterial species and mixture of different bacterial was used to identify the enz-bio signatures of Escherichia coli and Salmonella. The enz-bio signatures identified were: Lipophilic < Glucosidic < Proteolytic (for Escherichia coli); and Glucosidic = Lipophilic < Proteolytic (for Salmonella).