Carrier surface modification for enhanced attachment and growth of anammox biofilm.

This study investigates and compares the ammonia removal kinetics, attachment, biofilm development and anammox bacteria enrichment on various surface modified carriers throughout the 163 days of start-up of an MBBR system: virgin, dextran-functionalized carriers, silica-functionalized and pre-seeded denitrifying carriers. Silica-functionalized carriers along with pre-seeded denitrifying carriers induced significant higher kinetics, faster biofilm growth and greater anammox bacteria enrichment during the 64 days of operation compared to non-modified virgin and dextran-functionalized carriers. The elevated anammox bacteria counts along with the elevated kinetics of all carriers measured at day 106 indicated that the completed biofilm growth and biofilm maturation are achieved prior to or at day 106 of start-up.

Anammox attachment and biofilm development on surface-modified carriers with planktonic- and biofilm-based inoculation.

This study investigates the kinetics, attachment, biofilm development and anammox bacteria enrichment of a novel detached anammox biofilm inoculation method on non-modified virgin MBBR carriers and pre-seeded denitrifying carriers. The study compares these results to the more common use of attached anammox carriers for anammox MBBR inoculation. The anammox bacteria specific attachment-growth rates for virgin carriers inoculated with detached anammox biofilm mass were 38.

Anaerobic treatment of oil-contaminated wastewater with methane production using anaerobic moving bed biofilm reactors.

Oil-contaminated wastewaters are generally treated by a combination of physico-chemical and biological methods. Interest in the anaerobic treatment of oily wastewaters has increased since it complements aerobic treatment and produces energy in the form of methane. The objectives of this study were to characterise the anaerobic process spontaneously occurring in a full-scale storage tank at a facility treating waste oil and oil-contaminated effluents, and to evaluate the applicability of an anaerobic moving bed biofilm reactor (AnMBBR) and an anaerobic contact reactor (ACR) for treating the oil contaminated wastewater feeding the storage tank.

Consistent production of high quality PHA using activated sludge harvested from full scale municipal wastewater treatment - PHARIO.

Production of polyhydroxyalkanoate (PHA) biopolymers by mixed microbial cultures concurrent to wastewater treatment is a valorization route for residual organic material. This development has been at pilot scale since 2011 using industrial and municipal organic residuals. Previous experience was the basis for a PHA production demonstration project: PHARIO.

A process for polyhydroxyalkanoate (PHA) production from municipal wastewater treatment with biological carbon and nitrogen removal demonstrated at pilot-scale.

A process was developed for biological treatment of municipal wastewater for carbon and nitrogen removal while producing added-value polyhydroxyalkanoates (PHAs). The process comprised steps for pre-denitrification, nitrification and post-denitrification and included integrated fixed-film activated sludge (IFAS) with biofilm carrier media to support nitrification. In a pilot-scale demonstration (500-800L), wastewater treatment performance, in line with European standards, were achieved for total chemical oxygen demand (83% removal) and total nitrogen (80% removal) while producing a biomass that was able to accumulate up to 49% PHA of volatile suspended solids with acetic acid or fermented organic residues as substrates.

Carbon recovery from wastewater through bioconversion into biodegradable polymers.

Polyhydroxyalkanoates (PHA) are biodegradable polyesters that can be produced in bioprocesses from renewable resources in contrast to fossil-based bio-recalcitrant polymers. Research efforts have been directed towards establishing technical feasibility in the use of mixed microbial cultures (MMC) for PHA production using residuals as feedstock, mainly consisting of industrial process effluent waters and wastewaters. In this context, PHA production can be integrated with waste and wastewater biological treatment, with concurrent benefits of resource recovery and sludge minimization.

Polyhydroxyalkanoate (PHA) storage within a mixed-culture biomass with simultaneous growth as a function of accumulation substrate nitrogen and phosphorus levels.

The response of a mixed-microbial-culture (MMC) biomass for PHA accumulation was evaluated over a range of relative nitrogen (N) and phosphorus (P) availabilities with respect to the supply of either complex (fermented whey permeate - FWP) or simpler (acetic acid) organic feedstocks. Fed-batch feed-on-demand PHA accumulation experiments were conducted where the feed N/COD and P/COD ratios were varied ranging from conditions of nutrient starvation to excess. A feast-famine enrichment (activated sludge) biomass, produced in a pilot-scale aerobic sequencing batch reactor on FWP and with a long history of stable PHA accumulation performance, was used for all the experiments as reference material.

Impact of physical pre-treatment of source-sorted organic fraction of municipal solid waste on greenhouse-gas emissions and the economy in a Swedish anaerobic digestion system.

Several methods for physical pre-treatments of source sorted organic fraction of municipal solid waste (SSOFMSW) before for anaerobic digestion (AD) are available, with the common feature that they generate a homogeneous slurry for AD and a dry refuse fraction for incineration. The selection of efficient methods relies on improved understanding of how the pre-treatment impacts on the separation and on the slurry's AD. The aim of this study was to evaluate the impact of the performance of physical pre-treatment of SSOFMSW on greenhouse-gas (GHG) emissions and on the economy of an AD system including a biogas plant with supplementary systems for heat and power production in Sweden.

Integrated production of polyhydroxyalkanoates (PHAs) with municipal wastewater and sludge treatment at pilot scale.

A pilot-scale process was operated over 22 months at the Brussels North Wastewater Treatment Plant (WWTP) in order to evaluate polyhydroxyalkanoate (PHA) production integration with services of municipal wastewater and sludge management. Activated sludge was produced with PHA accumulation potential (PAP) by applying feast-famine selection while treating the readily biodegradable COD from influent wastewater (average removals of 70% COD, 60% CODsol, 24% nitrogen, and 46% phosphorus). The biomass PAP was evaluated to be in excess of 0.

Sludge minimization in municipal wastewater treatment by polyhydroxyalkanoate (PHA) production.

An innovative approach has been recently proposed in order to link polyhydroxyalkanoates (PHA) production with sludge minimization in municipal wastewater treatment, where (1) a sequencing batch reactor (SBR) is used for the simultaneous municipal wastewater treatment and the selection/enrichment of biomass with storage ability and (2) the acidogenic fermentation of the primary sludge is used to produce a stream rich in volatile fatty acids (VFAs) as the carbon source for the following PHA accumulation stage. The reliability of the proposed process has been evaluated at lab scale by using substrate synthetic mixtures for both stages, simulating a low-strength municipal wastewater and the effluent from primary sludge fermentation, respectively. Six SBR runs were performed under the same operating conditions, each time starting from a new activated sludge inoculum.

Polyhydroxyalkanoate (PHA) production from sludge and municipal wastewater treatment.

Polyhydroxyalkanoates (PHAs) are biodegradable polyesters with comparable properties to some petroleum-based polyolefins. PHA production can be achieved in open, mixed microbial cultures and thereby coupled to wastewater and solid residual treatment. In this context, waste organic matter is utilised as a carbon source in activated sludge biological treatment for biopolymer synthesis.

Integration of biopolymer production with process water treatment at a sugar factory.

The present investigation has focused on generating a surplus denitrifying biomass with high polyhydroxyalkanoate (PHA) producing potential while maintaining water treatment performance in biological nitrogen removal. The motivation for the study was to examine integration of PHA production into the water treatment and residuals management needs at the Suiker Unie sugar beet factory in Groningen, the Netherlands. At the factory, process waters are treated in nitrifying-denitrifying sequencing batch reactors (SBRs) to remove nitrogen found in condensate.

Methodological issues in life cycle assessment of mixed-culture polyhydroxyalkanoate production utilising waste as feedstock.

Assessing the environmental performance of emerging technologies using life cycle assessment (LCA) can be challenging due to a lack of data in relation to technologies, application areas or other life cycle considerations, or a lack of LCA methodology that address the specific concerns. Nevertheless, LCA can be a valuable tool in the environmental optimisation in the technology development phase. One emerging technology is the mixed-culture production of polyhydroxyalkanoates (PHAs).

Phosphorus recovery potential from a waste stream with high organic and nutrient contents via struvite precipitation.

Recovery of NH4(+)-N and PO(3-)-P via struvite precipitation (SP) was evaluated from liquor of thermally pretreated waste activated sludge, containing high levels of nutrients (1500 mg NH4(+)-N/L and 650 mg PO(3-)-P/L), organics (45.5 g COD/L) and suspended solids (3.5 g TSS/L), with reference to anaerobically digested sludge centrate.

The effects of substrate pre-treatment on anaerobic digestion systems: a review.

Focus is placed on substrate pre-treatment in anaerobic digestion (AD) as a means of increasing biogas yields using today's diversified substrate sources. Current pre-treatment methods to improve AD are being examined with regard to their effects on different substrate types, highlighting approaches and associated challenges in evaluating substrate pre-treatment in AD systems and its influence on the overall system of evaluation. WWTP residues represent the substrate type that is most frequently assessed in pre-treatment studies, followed by energy crops/harvesting residues, organic fraction of municipal solid waste, organic waste from food industry and manure.

Inhibition by fatty acids during fermentation of pre-treated waste activated sludge.

Fermentation of waste activated sludge produces volatile fatty acids (VFAs), which can be used as the carbon sources for numerous biological processes. However, product inhibition can limit extent of fermentation to VFAs. In this study, product inhibition during fermentation of waste activated sludge pre-treated by a thermal hydrolysis process (THP-WAS) was investigated.

Microaerophilic conditions support elevated mixed culture polyhydroxyalkanoate (PHA) yields, but result in decreased PHA production rates.

For commercial polyhydroxyalkanoate (PHA) production the objective is to maximise the fraction of feedstock that ends up as polymer, and minimise biomass growth. In this paper, oxygen limitation was applied to achieve this. Intracellular PHA content in mixed cultures in batch systems operated with low and high DO was compared.

Production of volatile fatty acids by fermentation of waste activated sludge pre-treated in full-scale thermal hydrolysis plants.

This work focuses on fermentation of pre-treated waste activated sludge (WAS) to generate volatile fatty acids (VFAs). Pre-treatment by high-pressure thermal hydrolysis (HPTH) was shown to aid WAS fermentation. Compared to fermentation of raw WAS, pre-treatment enabled a 2-5x increase in VFA yield (gVFA(COD)gTCOD(-1)) and 4-6x increase in VFA production rate (gVFA(COD) L(-1) d(-1)).

Production of polyhydroxyalkanoates in open, mixed cultures from a waste sludge stream containing high levels of soluble organics, nitrogen and phosphorus.

In this study, the production of polyhydroxyalkanoates (PHAs) from waste activated sludge (WAS) was evaluated. PHAs were produced from fermented WAS pretreated via high-pressure thermal hydrolysis, a stream characterised by high levels of nutrients (approximately 3.5 g N L(-1) and 0.

Substrate-dependent denitrification of abundant probe-defined denitrifying bacteria in activated sludge.

The denitrification capacity of different phylogenetic bacterial groups was investigated on addition of different substrates in activated sludge from two nutrient-removal plants. Nitrate/nitrite consumption rates (CRs) were calculated from nitrate and nitrite biosensor, in situ measurements. The nitrate/nitrite CRs depended on the substrate added, and acetate alone or combined with other substrates yielded the highest rates (3-6 mg N gVSS(-1) h(-1)).

Characterization of the loosely attached fraction of activated sludge bacteria.

Bacterial biomass was characterised in supernatants from activated sludge from a nutrient removal plant after settling before and after applying gentle shear (G approximately 600 s(-1)). Free-swimming and floc-associated bacteria were quantified by microscopy and their identity was determined by fluorescence in-situ hybridization (FISH). Total cell numbers in the supernatant after settling ranged within 2-9 x 10(7)cells/mL.

Production of acylated homoserine lactones by Aeromonas and Pseudomonas strains isolated from municipal activated sludge.

Up to now, the production and role of N-acyl homoserine lactones (AHLs) in activated sludge have been poorly understood. In this study, cross-feeding assays with the reporter strains Agrobacterium tumefaciens NTL4 and Chromobacterium violaceum CV026 were used to investigate AHL signal production by municipal activated sludge samples. AHL signal production was consistently detected from municipal activated sludge when different samples were incubated on nutrient media.

Anaerobic digestion as a core technology in sustainable management of organic matter.

In the past decades, anaerobic digestion (AD) has steadily gained importance. However, the technology is not regarded as a top priority in science policy and in industrial development at present. In order for AD to further develop, it is crucial that AD profits from the current fuel issues emerging in the international arena.

Activated sludge deflocculation under temperature upshifts from 30 to 45 degrees C.

Twelve independent batch experiments (<9h) with fresh municipal activated sludge were conducted to assess the occurrence and the mechanisms of deflocculation under a temperature shift from 30 to 45 degrees C. In each experiment, a transient reactor (2 L) was subjected to the temperature shift and a control reactor was operated at a constant temperature of 30 degrees C. The occurrence of deflocculation was demonstrated by the increase in turbidity and in the concentrations of biopolymers in the sludge supernatant from the transient reactor.

Physicochemical properties and stability of activated sludge flocs under temperature upshifts from 30 to 45 degrees C.

The impacts of temperature shifts from 30 to 45 degrees C on the structural stability and surface charge of activated sludge flocs were assessed in four sequencing batch reactors (SBRs) treating pulp and paper mill effluent. The improvement in floc stability was tested by sludge magnesium enrichment in one SBR and by operating another reactor at a high sludge retention time (SRT) of 33 days. Floc stability was characterized by dissociation constants with solutions of CaCl(2), KCl, urea, and ethylenediamine tetraacetate (EDTA).