Advancements in nanobiosensor technologies for in-vitro diagnostics to point of care testing.

Recently, the importance of rapid testing nanosensor technologies for in-vitro diagnostics (IVD) and point-of-care testing (POCT) is being increasingly recognized. Owing to their high sensitivity and rapidity, nanosensor-based diagnostic devices are evolving into self-diagnostic tools that enable real-time in-situ analyses. These advances have become the focus of the public health control system, not only to prevent the spread of infectious diseases but also to enable the early detection of critical diseases through continuous health monitoring technologies.

Quantum Dot-Based Three-Stack Tandem Near-Infrared-to-Visible Optoelectric Upconversion Devices.

Quantum dots (QDs) exhibit size-tunable optical properties, making them suitable for efficient light-sensing and light-emitting devices. Tandem devices that can convert near-infrared (NIR) to visible (Vis) signals can be fabricated by integrating an NIR-sensing QD device with a Vis electroluminescence (EL) QD device. However, these devices require delicate control of the QD layer during processing to prevent damage to the predeposited QD layers in tandem devices during the subsequent deposition of other functional layers.

Comparative study on the effects of grain blending on functional compound content and in vitro biological activity.

In this study, changes in bioactive compound contents and the in vitro biological activity of mixed grains, including oats, sorghum, finger millet, adzuki bean, and proso millet, with eight different blending ratios were investigated. The total phenolic compounds and flavonoid contents ranged from 14.43-16.

Tailoring photobiomodulation to enhance tissue regeneration.

Photobiomodulation (PBM), the use of biocompatible tissue-penetrating light to interact with intracellular chromophores to modulate the fates of cells and tissues, has emerged as a promising non-invasive approach to enhancing tissue regeneration. Unlike photodynamic or photothermal therapies that require the use of photothermal agents or photosensitizers, PBM treatment does not need external agents. With its non-harmful nature, PBM has demonstrated efficacy in enhancing molecular secretions and cellular functions relevant to tissue regeneration.

Skeletal muscle regeneration with 3D bioprinted hyaluronate/gelatin hydrogels incorporating MXene nanoparticles.

There has been significant progress in the field of three-dimensional (3D) bioprinting technology, leading to active research on creating bioinks capable of producing structurally and functionally tissue-mimetic constructs. TiCT MXene nanoparticles (NPs), promising two-dimensional nanomaterials, are being investigated for their potential in muscle regeneration due to their unique physicochemical properties. In this study, we integrated MXene NPs into composite hydrogels made of gelatin methacryloyl (GelMA) and hyaluronic acid methacryloyl (HAMA) to develop bioinks (namely, GHM bioink) that promote myogenesis.

Highly Aligned Ternary Nanofiber Matrices Loaded with MXene Expedite Regeneration of Volumetric Muscle Loss.

Current therapeutic approaches for volumetric muscle loss (VML) face challenges due to limited graft availability and insufficient bioactivities. To overcome these limitations, tissue-engineered scaffolds have emerged as a promising alternative. In this study, we developed aligned ternary nanofibrous matrices comprised of poly(lactide-co-ε-caprolactone) integrated with collagen and TiCT MXene nanoparticles (NPs) (PCM matrices), and explored their myogenic potential for skeletal muscle tissue regeneration.

Recent Advances in Marine Biomaterials Tailored and Primed for the Treatment of Damaged Soft Tissues.

The inherent self-repair abilities of the body often fall short when it comes to addressing injuries in soft tissues like skin, nerves, and cartilage. Tissue engineering and regenerative medicine have concentrated their research efforts on creating natural biomaterials to overcome this intrinsic healing limitation. This comprehensive review delves into the advancement of such biomaterials using substances and components sourced from marine origins.

Regulated Behavior in Living Cells with Highly Aligned Configurations on Nanowrinkled Graphene Oxide Substrates: Deep Learning Based on Interplay of Cellular Contact Guidance.

Micro-/nanotopographical cues have emerged as a practical and promising strategy for controlling cell fate and reprogramming, which play a key role as biophysical regulators in diverse cellular processes and behaviors. Extracellular biophysical factors can trigger intracellular physiological signaling via mechanotransduction and promote cellular responses such as cell adhesion, migration, proliferation, gene/protein expression, and differentiation. Here, we engineered a highly ordered nanowrinkled graphene oxide (GO) surface via the mechanical deformation of an ultrathin GO film on an elastomeric substrate to observe specific cellular responses based on surface-mediated topographical cues.

Extending the Operational Lifetime of Electrochemiluminescence Devices by Installing a Floating Bipolar Electrode.

Electrochemiluminescence (ECL) holds significant promise for the development of cost-effective light-emitting devices because of its simple structure. However, conventional ECL devices (ECLDs) have a major limitation of short operational lifetimes, rendering them impractical for real-world applications. Typically, the luminescence of these devices lasts no longer than a few minutes during operation.

Effect of Electron-Beam Irradiation on Functional Compounds and Biological Activities in Peanut Shells.

Peanut shells, rich in antioxidants, remain underutilized due to limited research. The present study investigated the changes in the functional compound content and skin aging-related enzyme inhibitory activities of peanut shells by electron-beam treatment with different sample states and irradiation doses. In addition, phenolic compounds in the peanut shells were identified and quantified using ultra-performance liquid chromatography with ion mobility mass spectrometry-quadrupole time-of-flight and high-performance liquid chromatography with a photodiode array detector, respectively.

- and -type InAs nanocrystals with innately controlled semiconductor polarity.

InAs semiconductor nanocrystals (NCs) exhibit intriguing electrical/optoelectronic properties suitable for next-generation electronic devices. Although there is a need for both - and -type semiconductors in such devices, InAs NCs typically exhibit only -type characteristics. Here, we report InAs NCs with controlled semiconductor polarity.

Network of Inorganic Nanocrystals Can Swell: Study of Swelling-Induced Surface Instability.

A unique organic-inorganic hybrid network composed of inorganic nanocores (ranging from semiconductors to metallic ones) interconnected through organic molecules can be produced by crosslinking the organic ligands of colloidal inorganic nanocrystals in assemblies. This work reports that this network, which is conventionally considered an inorganic film, can swell when exposed to a solvent because of the interaction between the solvent and the organic linkage within the network. Intriguingly, this work discovers that drying the solvent of the swollen organic-inorganic hybrid network can significantly affect the morphology owing to the swelling-induced compress stress, which is widely observed in various organic network systems.

Implantable Multi-Cross-Linked Membrane-Ionogel Assembly for Reversible Non-Faradaic Neurostimulation.

Neural interfaces play a major role in modulating neural signals for therapeutic purposes. To meet the demand of conformable neural interfaces for developing bioelectronic medicine, recent studies have focused on the performance of electrical neurostimulators employing soft conductors such as conducting polymers and electronic or ionic conductive hydrogels. However, faradaic charge injection at the interface of the electrode and nerve tissue causes irreversible gas evolution, oxidation of electrodes, and reduction of biological ions, thus causing undesired tissue damage and electrode degradation.

3D printed membranes of polylactic acid and graphene oxide for guided bone regeneration.

We fabricated graphene oxide (GO)-incorporated polylactic acid (PLA) (GO-PLA) films by using three-dimensional (3D) printing to explore their potential benefits as barrier membranes for guided bone regeneration (GBR). Our results showed that the 3D printed GO-PLA films provided highly favorable matrices for preosteoblasts and accelerated new bone formation in rat calvarial bone defect models.

Spontaneous Osteogenic Differentiation of Human Mesenchymal Stem Cells by Tuna-Bone-Derived Hydroxyapatite Composites with Green Tea Polyphenol-Reduced Graphene Oxide.

In recent years, bone tissue engineering (BTE) has made significant progress in promoting the direct and functional connection between bone and graft, including osseointegration and osteoconduction, to facilitate the healing of damaged bone tissues. Herein, we introduce a new, environmentally friendly, and cost-effective method for synthesizing reduced graphene oxide (rGO) and hydroxyapatite (HAp). The method uses epigallocatechin-3--gallate (EGCG) as a reducing agent to synthesize rGO (E-rGO), and HAp powder is obtained from Atlantic bluefin tuna ().

A systematic study on the use of multifunctional nanodiamonds for neuritogenesis and super-resolution imaging.

Background: Regeneration of defective neurons in central nervous system is a highlighted issue for neurodegenerative disease treatment. Various tissue engineering approaches have focused on neuritogenesis to achieve the regeneration of damaged neuronal cells because damaged neurons often fail to achieve spontaneous restoration of neonatal neurites. Meanwhile, owing to the demand for a better diagnosis, studies of super-resolution imaging techniques in fluorescence microscopy have triggered the technological development to surpass the classical resolution dictated by the optical diffraction limit for precise observations of neuronal behaviors.

3D bioprinting of human mesenchymal stem cells-laden hydrogels incorporating MXene for spontaneous osteodifferentiation.

Contemporary advances in three-dimensional (3D) bioprinting technologies have enabled the fabrication of tailored live 3D tissue mimetics. Furthermore, the development of advanced bioink materials has been highlighted to accurately reproduce the composition of a native extracellular matrix and mimic the intrinsic properties of laden cells. Recent research has shown that MXene is one of promising nanobiomaterials with osteogenic activity for bone grafts and scaffolds due to its unique atomic structure of three titanium layers between two carbon layers.

Patterning Quantum Dots via Photolithography: A Review.

Pixelating patterns of red, green, and blue quantum dots (QDs) is a critical challenge for realizing high-end displays with bright and vivid images for virtual, augmented, and mixed reality. Since QDs must be processed from a solution, their patterning process is completely different from the conventional techniques used in the organic light-emitting diode and liquid crystal display industries. Although innovative QD patterning technologies are being developed, photopatterning based on the light-induced chemical conversion of QD films is considered one of the most promising methods for forming micrometer-scale QD patterns that satisfy the precision and fidelity required for commercialization.