Long-range multicore optical fiber displacement sensor.

In this Letter, a long-range optical fiber displacement sensor based on an extrinsic Fabry-Perot interferometer (EFPI) built with a strongly coupled multicore fiber (SCMCF) is proposed and demonstrated. To fabricate the device, 9.2 mm of SCMCF was spliced to a conventional single-mode fiber (SMF).

Optical fiber temperature sensor based on a microcavity with polymer overlay.

An ultracompact, cost-effective, and highly accurate fiber optic temperature sensor is proposed and demonstrated. The sensing head consists of Fabry-Perot microcavity formed by an internal mirror made of a thin titanium dioxide (TiO) film and a microscopic segment of single-mode fiber covered with Poly(dimethylsiloxane) (PDMS). Due to the high thermo-optic coefficient of PDMS the reflectance of the fiber-PDMS interface varies strongly with temperature which in turn modifies the amplitude of the interference pattern.

Single tapered fiber tip for simultaneous measurements of thickness, refractive index and distance to a sample.

We demonstrate the capability of an air cavity Fabry-Perot interferometer (FPI), built with a tapered lead-in fiber tip, to measure three parameters simultaneously, distance, group refractive index and thickness of transparent samples introduced in the cavity. Tapering the lead-in fiber enhances the light coupling back efficiency, therefore is possible to enlarge the air cavity without a significant deterioration of the fringe visibility. Fourier transformation, used to analyze the reflected optical spectrum of our FPI, simplify the calculus to determine the position, thickness and refractive index.

Detection of aromatic compounds in tequila through the use of surface plasmon resonance.

For an expert nose, the aroma of a beverage is a fingerprint that can be used to certify its authenticity, distinguish between distillation processes, or even identify the raw material used to fabricate it. In this work, we propose a simple, automatic, and repeatable optical method, which can be used as a first and quick test to authenticate tequila samples. This method is based on the measurement of beam intensity changes, using the surface plasmon resonance technique, operating at a fixed angle.

All-fiber processing of terahertz-bandwidth signals based on cascaded tapered fibers.

Tapered single-mode fibers are employed to perform dynamic pulse shaping in a bandwidth of several terahertz. The transfer function of cascaded biconical tapers is controlled by introducing a phase shift into one of them through mechanical stretching. It is a simple and low-cost technique with potential to process signals with bandwidths as large as those allocated by standard optical fiber while introducing little degradation.

A refractive index sensor based on the resonant coupling to cladding modes in a fiber loop.

We report an easy-to-build, compact, and low-cost optical fiber refractive index sensor. It consists of a single fiber loop whose transmission spectra exhibit a series of notches produced by the resonant coupling between the fundamental mode and the cladding modes in a uniformly bent fiber. The wavelength of the notches, distributed in a wavelength span from 1,400 to 1,700 nm, can be tuned by adjusting the diameter of the fiber loop and are sensitive to refractive index changes of the external medium.

Determination of quality and adulteration of tequila through the use of surface plasmon resonance.

In this work, the surface plasmon resonance (SPR) technique is used to determine the quality or adulteration of tequila beverages. Graphic analyses of the position and width of the SPR curve are related to the complex refractive index of the sample, showing differentiated regions where one can easily and unambiguously identify white, aged, or extra-aged tequilas, and even adulterated or low quality tequilas. The curves generated by aged and extra-aged tequilas, with respect to those obtained from white tequilas, are wider, while the resonant peak shifts towards larger angles.

Optical microfiber mode interferometer for temperature-independent refractometric sensing.

We report on a functional optical microfiber mode interferometer and its applications for absolute, temperature-insensitive refractive index sensing. A standard optical fiber was tapered down to 10 μm. The central part of the taper, i.

An intrinsic fiber-optic single loop micro-displacement sensor.

A micro-displacement sensor consisting of a fiber-loop made with a tapered fiber is reported. The sensor operation is based on the interaction between the fundamental cladding mode propagating through the taper waist and higher order cladding modes excited when the taper is deformed to form a loop. As a result, a transmission spectrum with several notches is observed, where the notch wavelength resonances shift as a function of the loop diameter.

Compact optical fiber curvature sensor based on concatenating two tapers.

A low-loss, compact, and highly sensitive optical fiber curvature sensor is presented. The device consists of two identical low-loss fused fiber tapers in tandem separated by a distance L. When the optical fiber is kept straight and fixed, no interference pattern appears in the transmitted spectrum.

Birefringence measurement in double-clad fiber lasers with large cross section.

We report on birefringence measurements in double-clad fibers with large cross section, doped with neodymium and ytterbium. The experimental results for rectangular double-clad fibers are compared with those for single-clad circular neodymium-doped fibers, taking into account existing models of stress- and geometry-induced birefringence. We demonstrated that the ellipticity of an outer silica cladding has no effect on birefringence in large-area double-clad fibers.

Capillary refractometer integrated in a microfluidic configuration.

We propose a microfluidic method to measure the refractive index of liquids. This method is based on the dynamic focusing by a capillary when liquids with different refractive indexes are inserted into it. Fabrication of such a refractometer has been done by encapsulating two fibers and a capillary.

Continuous-wave measurement of the fiber nonlinear refractive index.

We propose a technique for measuring the nonlinear refractive index of fiber based on transmission-coefficient measurements in a fiber Sagnac interferometer. In contrast with traditional methods, the proposed method uses a single optical source operating in cw mode and direct intensity measurement, enabling one to avoid the errors caused by fiber dispersion and uncertainty of spectral peak difference measurements that occur with pulse-based methods. The nonlinear refractive index in 20-mol.

Microstructured optical fiber coated with thin films for gas and chemical sensing.

We propose the use of tapered microstructured fibers with collapsed air-holes coated with thin layers for gas sensing. The collapsing of the holes allows having access to the evanescent fields which can be absorbed or attenuated with gas-permeable thin films. On the other hand, a section of the holey fiber is transformed into a solid multimode fiber.

Temperature-independent strain sensor made from tapered holey optical fiber.

A large-mode-area holey fiber was tapered to a point in which the airholes collapsed, and its dependence on temperature and strain was studied. The transmission spectrum of such a fiber exhibits a series of peaks owing to the interference between the modes of the solid taper waist. We found that the interference peaks shifted to shorter wavelengths as the taper was elongated.

Holey fiber tapers with resonance transmission for high-resolution refractive index sensing.

The use of large-mode-area tapered holey fibers with collapsed air holes for refractive index sensing is demonstrated. The collapsing of the holes is achieved by tapering the fibers with a "slow-and-hot" method. This non adiabatic process makes the core mode to couple to multiple modes of the solid taper waist.

Fast detection of hydrogen with nano fiber tapers coated with ultra thin palladium layers.

We report a miniature hydrogen sensor that consists of a subwavelength diameter tapered optical fiber coated with an ultra thin palladium film. The optical properties of the palladium layer changes when the device is exposed to hydrogen. Consequently, the absorption of the evanescent waves also changes.

In-line optical fiber sensors based on cladded multimode tapered fibers.

The use of uniform-waist cladded multimode tapered optical fibers is demonstrated for evanescent wave spectroscopy and sensors. The tapering is a simple, low-loss process and consists of stretching the fiber while it is being heated with an oscillating flame torch. As examples, a refractive-index sensor and a hydrogen sensor are demonstrated by use of a conventional graded-index multimode optical fiber.

Temperature sensor based on the power reflected by a Bragg grating in a tapered fiber.

We present a temperature sensor based on two chirped gratings made in optical fibers tapered by fusion. One of the gratings has a metallic shielding and acts as sensor element, whereas the second grating provides a reference signal. The sensor is interrogated by measuring the power reflected by the two gratings, and the system has an accuracy of 0.

Optical-fiber surface-plasmon resonance sensor with multiple resonance peaks.

We report on an optical fiber surface plasmon resonance sensor that exhibits multiple resonance peaks. The sensor is based on a uniform-waist single-mode tapered fiber coated on one side with a thin metal layer. Owing to the asymmetry of the sensor structure, the different hybrid surface plasmon modes supported by the semicircular layer can be excited by the fundamental fiber mode.

Fabrication and modeling of uniform-waist single-mode tapered optical fiber sensors.

We report the fabrication and modeling of single-mode tapered optical fiber sensors. The fabrication technique consist of stretching a section of fiber with an oscillating flame torch. Such a process allows controllable fabrication of lossless tapered fibers with a uniform waist.