Growth of membranes formed by associating polymers at interfaces.

Polymer association at liquid-liquid interfaces is a promising way to spontaneously obtain soft self-healing membranes. In the case of reversible bonding between two polymers, the macromolecules are mobile everywhere within the membrane and they can be absorbed into it at both boundaries due to binding to macromolecules of the other type. In this work, we develop the theoretical model of membrane growth based on these assumptions.

Tuning the water intrinsic permeability of PEGDA hydrogel membranes by adding free PEG chains of varying molar masses.

We explore the effect of poly(ethylene glycol) (PEG) molar mass on the intrinsic permeability and structural characteristics of poly(ethylene glycol) diacrylate PEGDA/PEG composite hydrogel membranes. We observe that by varying the PEG content and molar mass, we can finely adjust the water intrinsic permeability by several orders of magnitude. Notably, we show the existence of maximum water intrinsic permeability, already identified in a previous study to be located at the critical overlap concentration * of PEG chains, for the highest PEG molar mass studied.

Sieving and Clogging in PEG-PEGDA Hydrogel Membranes.

Hydrogels are promising systems for separation applications due to their structural characteristics (i.e., hydrophilicity and porosity).

Surface stress and shape relaxation of gelling droplets.

Solidification is a heterogeneous transformation from liquid to solid, which usually combines transport, phase transition and mechanical strain. Predicting the shapes resulting from such a complex process is fascinating and has a wide range of implications from morphogenesis in biological tissues to industrial processes. For soft solids initially at equilibrium, elastic stresses, whether tensile or compressive, can be induced by heterogeneous volumetric deformations of the material.

Relation between oxidation kinetics and reactant transport in an aqueous foam.

Hypothesis: Aqueous foams are expected to constitute exquisite particularly suitable reactive medium for the oxidation of metals, since the reactant H can be supplied through the continuous liquid phase, while the reactant O can be transported through the gas bubbles.

Experiments: To test this hypothesis, we investigated the oxidation of a metallic copper cylinder immersed in an aqueous foam. To study the relation between the transport of these reactants and the kinetics of the chemical reaction we use a forced drainage setup which enables us to control both the advection velocity of the H ions through the foam and the foam liquid fraction.

From Individual Liquid Films to Macroscopic Foam Dynamics: A Comparison between Polymers and a Nonionic Surfactant.

Foams can resist destabilizaton in ways that appear similar on a macroscopic scale, but the microscopic origins of the stability and the loss thereof can be quite diverse. Here, we compare both the macroscopic drainage and ultimate collapse of aqueous foams stabilized by either a partially hydrolyzed poly(vinyl alcohol) (PVA) or a nonionic low-molecular-weight surfactant (BrijO10) with the dynamics of individual thin films at the microscale. From this comparison, we gain significant insight regarding the effect of both surface stresses and intermolecular forces on macroscopic foam stability.

Phenolic Compounds Extracted from Cherry Tree ( Branches: Impact of the Process on Cosmetic Properties.

Cherry tree branches ( var Rosaceae) are agricultural by-products that are often neglected, yet they are rich in phenolic compounds and highly appreciated for their numerous biological activities. Extracts of cherry tree branches were evaluated for their use in cosmetics, particularly for their antioxidant, anti-tyrosinase, and antimicrobial activities. Samples were obtained by accelerated solvent extraction (ASE) at different ethanol percentages and different temperatures.

Solute effects on the dynamics and deformation of emulsion droplets during freezing.

Soft or rigid particles, suspended in a liquid melt, interact with an advancing solidification front in various industrial and natural processes, such as fabrication of particle-reinforced-composites, growth of crystals, cryopreservation, frost heave, and growth of sea ice. The particle dynamics relative to the front determine the microstructure as well as the functional properties of the solidified material. Previous studies have extensively investigated the interaction of foreign objects with a moving solid-liquid interface in pure melts while in most real-life systems, solutes or surface active impurities are almost always present.

Growth Mechanism of Polymer Membranes Obtained by H-Bonding Across Immiscible Liquid Interfaces.

Complexation of polymers at liquid interfaces is an emerging technique to produce all-liquid printable and self-healing devices and membranes. It is crucial to control the assembly process, but the mechanisms at play remain unclear. Using two different reflectometric methods, we investigate the spontaneous growth of H-bonded PPO-PMAA (polypropylene oxide-polymetacrylic acid) membranes at a flat liquid-liquid interface.

Multiple objects interacting with a solidification front.

The interaction of objects suspended in a liquid melt with an advancing solidification front is of special interest in nature and engineering sciences. The front can either engulf the object into the growing crystal or repel it. Therefore, the object-front confrontation can have a strong influence on the microstructure and mechanical or functional properties of the solidified material.

Integration of a soft dielectric composite into a cantilever beam for mechanical energy harvesting, comparison between capacitive and triboelectric transducers.

Flexible dielectrics that harvest mechanical energy via electrostatic effects are excellent candidates as power sources for wearable electronics or autonomous sensors. The integration of a soft dielectric composite (polydimethylsiloxane PDMS-carbon black CB) into two mechanical energy harvesters is here presented. Both are based on a similar cantilever beam but work on different harvesting principles: variable capacitor and triboelectricity.

Ablation of water drops suspended in asphaltene/heptol solutions due to spontaneous emulsification.

Complex molecules from crude oil, such as asphaltenes, can adsorb onto oil/water interfaces. This creates a viscoelastic network that may cause difficulties in oil recovery and oil spills. In addition to stabilization of oil/water emulsions, they may also cause the spontaneous formation of micron-sized droplets.

Probing the adsorption/desorption of amphiphilic polymers at the air-water interface during large interfacial deformations.

Hydrophobically modified polymers are good candidates for the stabilization of liquid interfaces thanks to the high anchoring energy of the hydrophobic parts. In this article we probe the interfacial anchoring of a series of home-made hydrophobically modified polymers with controlled degree of grafting by studying their behavior upon large area dilations and compressions. By comparing the measured interfacial tension to the one that we expect in the case of a constant number of adsorbed monomers, we are able to deduce whether desorption or adsorption occurs during area variations.

Microfluidic probing of the complex interfacial rheology of multilayer capsules.

Encapsulation of chemicals using polymer membranes enables control of their transport and delivery for applications such as agrochemistry or detergency. To rationalize the design of polymer capsules, it is necessary to understand how the membranes' mechanical properties control the transport and release of the cargo. In this article, we use microfluidics to produce model polymer capsules and study in situ their behavior in controlled divergent flows.

Adsorption dynamics of hydrophobically modified polymers at an air-water interface.

Using surface-tension measurements, we study the brush-limited adsorption dynamics of a range of amphiphilic polymers, PAAH-[Formula: see text]-[Formula: see text] composed of a poly(acrylic acid) backbone, PAAH, grafted with a fraction [Formula: see text] of alkyl moieties, containing either n = 8 or n = 12 carbon atoms, at pH conditions where the PAAH backbone is not charged. At short times, the surface tension decreases more sharply as the degree of grafting increases, while, at long times, the adsorption dynamics becomes logarithmic in time and is slower as the degree of grafting increases. This logarithmic behavior at long times indicates the building of a free-energy barrier which grows over time.

A temperature-controlled stage for laser scanning confocal microscopy and case studies in materials science.

If confocal microscopy is an ubiquitous tool in life science, its applications in chemistry and materials science are still, in comparison, very limited. Of particular interest in these domains is the use of confocal microscopy to investigate temperature-dependent phenomena such as self-assembly, diffusio- or thermophoresis, or crystal growth. Several hurdles must be solved to develop a temperature-controlled stage for laser scanning confocal microscopy, in particular regarding the influence of an elevated temperature gradient close to the microscope objective, which most people try very hard to avoid.

Colloidal Particle Adsorption at Water-Water Interfaces with Ultralow Interfacial Tension.

Using fluorescence confocal microscopy we study the adsorption of single latex microparticles at a water-water interface between demixing aqueous solutions of polymers, generally known as a water-in-water emulsion. Similar microparticles at the interface between molecular liquids have exhibited an extremely slow relaxation preventing the observation of expected equilibrium states. This phenomenon has been attributed to "long-lived" metastable states caused by significant energy barriers ΔF∼γA_{d}≫k_{B}T induced by high interfacial tension (γ∼10^{-2}  N/m) and nanoscale surface defects with characteristic areas A_{d}≃10-30  nm^{2}.

Five-dimensional imaging of freezing emulsions with solute effects.

The interaction of objects with a moving solidification front is a common feature of many industrial and natural processes such as metal processing, the growth of single crystals, the cryopreservation of cells, or the formation of sea ice. Interaction of solidification fronts with objects leads to different outcomes, from total rejection of the objects to their complete engulfment. We imaged the freezing of emulsions in five dimensions (space, time, and solute concentration) with confocal microscopy.

Foaming of Transient Polymer Hydrogels.

Foams made with polymer hydrogels can be used in a variety of applications, such as scaffolds for biomedical applications or decontamination processes. However, from a practical point of view, it is difficult to introduce bubbles into viscous or viscoelastic fluids and to produce large volumes of hydrogel foams. In the present article, we investigate the foaming process of poly(vinyl alcohol) (PVA)/borax transient hydrogels, where PVA chains reversibly bind to borax molecules.

Mechanical cell disruption of Parachlorella kessleri microalgae: Impact on lipid fraction composition.

Samples of nitrogen-starved Parachlorella kessleri containing intact cells (IC), cells ground by bead milling (BM), and cells subjected to high-pressure cell disruption (HPD), together with their supernatants after centrifugation, were compared for granulometry and lipid profiles. The effects of disruption on the lipid profile and organisation were evaluated. The quantity of lipids available for extraction increased with disruption, and up to 81% could be recovered in supernatants after centrifugation, but a marked reorganization occurred.

One-Step Fabrication of pH-Responsive Membranes and Microcapsules through Interfacial H-Bond Polymer Complexation.

Biocompatible microencapsulation is of widespread interest for the targeted delivery of active species in fields such as pharmaceuticals, cosmetics and agro-chemistry. Capsules obtained by the self-assembly of polymers at interfaces enable the combination of responsiveness to stimuli, biocompatibility and scaled up production. Here, we present a one-step method to produce in situ membranes at oil-water interfaces, based on the hydrogen bond complexation of polymers between H-bond acceptor and donor in the oil and aqueous phases, respectively.

Giant Electrostrictive Response and Piezoresistivity of Emulsion Templated Nanocomposites.

Using an emulsion road and optimizing the dispersion process, we prepare polymer carbone nanotubes (CNT) and polymer reduced graphene oxide (rGO) composites. The introduction of conductive nanoparticles into polymer matrices modifies the electronic properties of the material. We show that these materials exhibit giant electrostriction coefficients in the intermediate filler concentration (below 1 wt %).

Optical control of surface forces and instabilities in foam films using photosurfactants.

Molecular interactions in thin liquid films, such as the disjoining pressure, are involved in interfacial phenomena such as emulsion and foam stabilization. In this article we show that through light stimulation we can control remotely the disjoining pressure in a thin liquid film stabilized by a photosurfactant. We stabilize a horizontal thin liquid film using a cationic photosurfactant, AzoTAB, bearing an azobenzene moiety on the hydrophobic tail which can switch from a trans to a cis conformation upon light stimulation.

Drainage dynamics of thin liquid foam films containing soft PNiPAM microgels: influence of the cross-linking density and concentration.

We investigate the drainage dynamics of thin liquid foam films containing PNiPAM microgel suspensions with two cross-linking densities (1.5 and 5 mol% BIS) and at two microgel concentrations (0.1 and 1% wt).