A Monometallic Bis(cyaphido) Complex.

The first example of a bis(cyaphido) complex, trans-[Ru(dppe)(C≡P)], is described, unequivocally demonstrating the synthetic accessibility and stability of complexes that feature more than one cyaphido ligand. Synthesis is achieved from the precedent cation [Ru(dppe)(C≡P)] via sequential coordination and desilylation of the phosphaalkyne MeSiC≡P. The heteroleptic analogue trans-[Ru(dppe)(C≡N)(C≡P)] is also prepared from the same cation and NaCN; both cyaphido complexes are structurally characterized, enabling the first direct comparison of cyaphide with cyanide, its isoelectronic and isolobal counterpart.

Formation of Reversible Solid Electrolyte Interface on Graphite Surface from Concentrated Electrolytes.

Li-ion batteries (LIB) have been successfully commercialized after the identification of ethylene-carbonate (EC)-containing electrolyte that can form a stable solid electrolyte interphase (SEI) on carbon anode surface to passivate further side reactions but still enable the transportation of the Li cation. These electrolytes are still utilized, with only minor changes, after three decades. However, the long-term cycling of LIB leads to continuous consumption of electrolyte and growth of SEI layer on the electrode surface, which limits the battery's life and performance.

Controlling Proton Delivery through Catalyst Structural Dynamics.

The fastest synthetic molecular catalysts for H production and oxidation emulate components of the active site of hydrogenases. The critical role of controlled structural dynamics is recognized for many enzymes, including hydrogenases, but is largely neglected in designing synthetic catalysts. Our results demonstrate the impact of controlling structural dynamics on H production rates for [Ni(P N ) ] catalysts (R=n-hexyl, n-decyl, n-tetradecyl, n-octadecyl, phenyl, or cyclohexyl).

Investigating the role of chain and linker length on the catalytic activity of an H production catalyst containing a β-hairpin peptide.

Building on our recent report of an active H production catalyst [Ni(P N)] (Prop = phenylpropionic acid, peptide (R10) = WIpPRWTGPR-NH, p = D-proline and PN = 1-aza-3,6-diphosphacycloheptane) that contains structured β-hairpin peptides, here we investigate how H production is effected by: (1) the length of the hairpin (eight or ten residues) and (2) limiting the flexibility between the peptide and the core complex by altering the length of the linker: phenylpropionic acid (three carbons) or benzoic acid (one carbon). Reduction of the peptide chain length from ten to eight residues increases or maintains the catalytic current for H production for all complexes, suggesting a non-productive steric interaction at longer peptide lengths. While the structure of the hairpin appears largely intact for the complexes, NMR data are consistent with differences in dynamic behavior which may contribute to the observed differences in catalytic activity.

Kinetic Analysis of Competitive Electrocatalytic Pathways: New Insights into Hydrogen Production with Nickel Electrocatalysts.

The hydrogen production electrocatalyst Ni(P(Ph)2N(Ph)2)2(2+) (1) is capable of traversing multiple electrocatalytic pathways. When using dimethylformamidium, DMF(H)(+), the mechanism of H2 formation by 1 changes from an ECEC to an EECC mechanism as the potential approaches the Ni(I/0) couple. Two electrochemical methods, current-potential analysis and foot-of-the-wave analysis (FOWA), were performed on 1 to measure detailed kinetics of the competing ECEC and EECC pathways.

Anion-Tunable Properties and Electrochemical Performance of Functionalized Ferrocene Compounds.

We report a series of ionically modified ferrocene compounds for hybrid lithium-organic non-aqueous redox flow batteries, based on the ferrocene/ferrocenium redox couple as the active catholyte material. Tetraalkylammonium ionic moieties were incorporated into the ferrocene structure, in order to enhance the solubility of the otherwise relatively insoluble ferrocene. The effect of various counter anions of the tetraalkylammonium ionized species appended to the ferrocene, such as bis(trifluoromethanesulfonyl)imide, hexafluorophosphate, perchlorate, tetrafluoroborate, and dicyanamide on the solubility of the ferrocene was investigated.

Molecular electrocatalysts for oxidation of hydrogen using earth-abundant metals: shoving protons around with proton relays.

Sustainable, carbon-neutral energy is needed to supplant the worldwide reliance on fossil fuels in order to address the persistent problem of increasing emissions of CO2. Solar and wind energy are intermittent, highlighting the need to develop energy storage on a huge scale. Electrocatalysts provide a way to convert between electrical energy generated by renewable energy sources and chemical energy in the form of chemical bonds.

Increasing the rate of hydrogen oxidation without increasing the overpotential: a bio-inspired iron molecular electrocatalyst with an outer coordination sphere proton relay.

Oxidation of hydrogen (H) to protons and electrons for energy production in fuel cells is currently catalyzed by platinum, but its low abundance and high cost present drawbacks to widespread adoption. Precisely controlled proton removal from the active site is critical in hydrogenase enzymes in nature that catalyze H oxidation using earth-abundant metals (iron and nickel). Here we report a synthetic iron complex, (Cp)Fe(PN P)(Cl), that serves as a precatalyst for the oxidation of H, with turnover frequencies of 290 s in fluorobenzene, under 1 atm of H using 1,4-diazabicyclo[2.

Highly active electrolytes for rechargeable Mg batteries based on a [Mg2(μ-Cl)2](2+) cation complex in dimethoxyethane.

A novel [Mg2(μ-Cl)2](2+) cation complex, which is highly active for reversible Mg electrodeposition, was identified for the first time in this work. This complex was found to be present in electrolytes formulated in dimethoxyethane (DME) through dehalodimerization of non-nucleophilic MgCl2 by reacting with either Mg salts (such as Mg(TFSI)2, TFSI = bis(trifluoromethane)sulfonylimide) or Lewis acid salts (such as AlEtCl2 or AlCl3). The molecular structure of the cation complex was characterized by single crystal X-ray diffraction, Raman spectroscopy and NMR.

Nickel complexes of a binucleating ligand derived from an SCS pincer.

A binucleating ligand has been prepared that contains an SCS pincer and three oxygen donor atoms in a partial crown ether loop. To enable metalation with Ni(0), a bromoarene precursor was used and resulted in the formation of a nickel-bromide complex in the SCS pincer portion of the ligand. Reaction of the nickel complex with a lithium salt yielded a heterobimetallic complex with bromide bridging the two metal centers.

Solvent and electrolyte effects on Ni(P(R)(2)N(R')2)(2)-catalyzed electrochemical oxidation of hydrogen.

We report solvent and electrolyte effects on the electrocatalytic oxidation of H2 using Ni(P(Cy)2N(R')2)2 (R = Bn, (t)Bu) complexes. A turnover frequency of 46 s(-1) for Ni(P(Cy)2N(Bn)2)2 was obtained using 0.2 M [(n)Bu4N][BF4] in THF.

Production of hydrogen by electrocatalysis: making the H-H bond by combining protons and hydrides.

Generation of hydrogen by reduction of two protons by two electrons can be catalysed by molecular electrocatalysts. Determination of the thermodynamic driving force for elimination of H2 from molecular complexes is important for the rational design of molecular electrocatalysts, and allows the design of metal complexes of abundant, inexpensive metals rather than precious metals ("Cheap Metals for Noble Tasks"). The rate of H2 evolution can be dramatically accelerated by incorporating pendant amines into diphosphine ligands.

Controlling proton movement: electrocatalytic oxidation of hydrogen by a nickel(II) complex containing proton relays in the second and outer coordination spheres.

A nickel bis(diphosphine) complex containing proton relays in the second and outer coordination spheres, Ni(P(Cy)2N((CH2)2OMe))2, (P(Cy)2N((CH2)2OMe) = 1,5-di(methoxyethyl)-3,7-dicyclohexyl-1,5-diaza-3,7-diphosphacyclooctane), is an electrocatalyst for hydrogen oxidation. The addition of hydrogen to the Ni(II) complex results in rapid formation of three isomers of the doubly protonated Ni(0) complex, [Ni(P(Cy)2N((CH2)2OMe)2H)2](2+). The three isomers show fast interconversion at 40 °C, unique to this complex in this class of catalysts.

Production of H2 at fast rates using a nickel electrocatalyst in water-acetonitrile solutions.

We report a synthetic nickel complex containing proton relays, [Ni(P(Ph)2N(C6H4OH)2)2](BF4)2 (P(Ph)2N(C6H4OH)2 = 1,5-bis(p-hydroxyphenyl)-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclo-octane), that catalyzes the production of H2 in aqueous acetonitrile with turnover frequencies of 750-170,000 s(-1) at experimentally determined overpotentials of 310-470 mV.

High catalytic rates for hydrogen production using nickel electrocatalysts with seven-membered cyclic diphosphine ligands containing one pendant amine.

A series of Ni-based electrocatalysts, [Ni(7P(Ph)2N(C6H4X))2](BF4)2, featuring seven-membered cyclic diphosphine ligands incorporating a single amine base, 1-para-X-phenyl-3,6-triphenyl-1-aza-3,6-diphosphacycloheptane (7P(Ph)2N(C6H4X), where X = OMe, Me, Br, Cl, or CF3), have been synthesized and characterized. X-ray diffraction studies have established that the [Ni(7P(Ph)2N(C6H4X))2](2+) complexes have a square planar geometry, with bonds to four phosphorus atoms of the two bidentate diphosphine ligands. Each of the complexes is an efficient electrocatalyst for hydrogen production at the potential of the Ni(II/I) couple, with turnover frequencies ranging from 2400 to 27,000 s(-1) with [(DMF)H](+) in acetonitrile.

Structural and spectroscopic characterization of 17- and 18-electron piano-stool complexes of chromium. Thermochemical analyses of weak Cr-H bonds.

The 17-electron radical CpCr(CO)(2)(IMe)(•) (IMe = 1,3-dimethylimidazol-2-ylidene) was synthesized by the reaction of IMe with [CpCr(CO)(3)](2), and characterized by single crystal X-ray diffraction and by electron paramagnetic resonance (EPR), IR, and variable temperature (1)H NMR spectroscopy. The metal-centered radical is monomeric under all conditions and exhibits Curie paramagnetic behavior in solution. An electrochemically reversible reduction to 18-electron CpCr(CO)(2)(IMe)(-) takes place at E(1/2) = -1.

A modular, energy-based approach to the development of nickel containing molecular electrocatalysts for hydrogen production and oxidation.

This review discusses the development of molecular electrocatalysts for H2 production and oxidation based on nickel. A modular approach is used in which the structure of the catalyst is divided into first, second, and outer coordination spheres. The first coordination sphere consists of the ligands bound directly to the metal center, and this coordination sphere can be used to control such factors as the presence or absence of vacant coordination sites, redox potentials, hydride donor abilities and other important thermodynamic parameters.

Investigating the role of the outer-coordination sphere in [Ni(P(Ph)2N(Ph‑R)2)2]2+ hydrogenase mimics.

A series of dipeptide substituted nickel complexes with the general formula, [Ni(P(Ph)(2)N(NNA-amino acid/ester)(2))(2)](BF(4))(2), have been synthesized and characterized (P(2)N(2) = 1,5-diaza-3,7-diphosphacyclooctane, and the dipeptide consists of the non-natural amino acid, 3-(4-aminophenyl)propionic acid (NNA), coupled to amino acid/esters = glutamic acid, alanine, lysine, and aspartic acid). Each of these complexes is an active electrocatalyst for H(2) production. The effects of the outer-coordination sphere on the catalytic activity for the production of H(2) were investigated; specifically, the impact of sterics, the ability of the side chain or backbone to protonate and the pK(a) values of the amino acid side chains were studied by varying the amino acids in the dipeptide.

Synthesis and reactivity of molybdenum and tungsten bis(dinitrogen) complexes supported by diphosphine chelates containing pendant amines.

Molybdenum and tungsten bis(dinitrogen) complexes of the formula M(N(2))(2)(PNP)(2) (M = Mo and W) and W(N(2))(2)(dppe)(PNP), supported by diphosphine ligands containing a pendant amine of the formula (CH(2)PR(2))(2)NR' = P(R)N(R')P(R) (R = Et, Ph; R' = Me, Bn), have been prepared by Mg reduction of metal halides under an N(2) atmosphere. The complexes have been characterized by NMR and IR spectroscopy, X-ray crystallography, and cyclic voltammetry. Reactivity of the target Mo and W bis(dinitrogen) compounds with CO results in the formation of dicarbonyl complexes.

Studies of a series of [Ni(P(R)2N(Ph)2)2(CH3CN)]2+ complexes as electrocatalysts for H2 production: substituent variation at the phosphorus atom of the P2N2 ligand.

A series of [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes containing the cyclic diphosphine ligands [P(R)(2)N(Ph)(2) = 1,5-diaza-3,7-diphosphacyclooctane; R = benzyl (Bn), n-butyl (n-Bu), 2-phenylethyl (PE), 2,4,4-trimethylpentyl (TP), and cyclohexyl (Cy)] have been synthesized and characterized. X-ray diffraction studies reveal that the cations of [Ni(P(Bn)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) and [Ni(P(n-Bu)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) have distorted trigonal bipyramidal geometries. The Ni(0) complex [Ni(P(Bn)(2)N(Ph)(2))(2)] was also synthesized and characterized by X-ray diffraction studies and shown to have a distorted tetrahedral structure.

A synthetic nickel electrocatalyst with a turnover frequency above 100,000 s⁻¹ for H₂ production.

Reduction of acids to molecular hydrogen as a means of storing energy is catalyzed by platinum, but its low abundance and high cost are problematic. Precisely controlled delivery of protons is critical in hydrogenase enzymes in nature that catalyze hydrogen (H(2)) production using earth-abundant metals (iron and nickel). Here, we report that a synthetic nickel complex, [Ni(P(Ph)(2)N(Ph))(2)](BF(4))(2), (P(Ph)(2)N(Ph) = 1,3,6-triphenyl-1-aza-3,6-diphosphacycloheptane), catalyzes the production of H(2) using protonated dimethylformamide as the proton source, with turnover frequencies of 33,000 per second (s(-1)) in dry acetonitrile and 106,000 s(-1) in the presence of 1.

Electrocatalytic oxidation of formate by [Ni(P(R)2N(R')2)2(CH3CN)]2+ complexes.

[Ni(P(R)(2)N(R')(2))(2)(CH(3)CN)](2+) complexes with R = Ph, R' = 4-MeOPh or R = Cy, R' = Ph , and a mixed-ligand [Ni(P(R)(2)N(R')(2))(P(R''(2))N(R'(2)))(CH(3)CN)](2+) with R = Cy, R' = Ph, R'' = Ph, have been synthesized and characterized by single-crystal X-ray crystallography. These and previously reported complexes are shown to be electrocatalysts for the oxidation of formate in solution to produce CO(2), protons, and electrons, with rates that are first-order in catalyst and formate at formate concentrations below ∼0.04 M (34 equiv).

Synthesis of 1,4,7-triphenyl-1,4,7-triphosphacyclononane: the first metal-free synthesis of a [9]-aneP(3)R(3) ring.

The 1,4,7-triphenyl-1,4,7-triphosphacyclononane ([9]-aneP(3)Ph(3)) macrocycle was synthesized through the reaction of lithium bis(2-phenylphosphidoethyl)phenylphosphine with 1,2-dichloroethane. [9]-aneP(3)Ph(3) was subsequently coordinated to a Mo(0) metal center and isolated as the fac-Mo([9]-aneP(3)Ph(3))(CO)(3) metal complex.