Electrografted Laser-Induced Graphene: Direct Detection of Neurodegenerative Disease Biomarker in Cerebrospinal Fluid.

There are more than 50 neurodegenerative disorders, and amyotrophic lateral sclerosis (ALS) is one of the most common disorders that poses diagnostic and treatment challenges. The poly glycine-proline (polyGP) dipeptide repeat is a toxic protein that has been recognized as a pharmacodynamic biomarker of C9orf72-associated (c9+) ALS, a subtype of ALS that originates from genetic mutation. Early detection of polyGP will help healthcare providers start timely gene therapy.

Pseudouridine-modified RNA probe for label-free electrochemical detection of nucleic acids on 2D MoS nanosheets.

RNA modification, particularly pseudouridine (Ψ), has played an important role in the development of the mRNA-based COVID-19 vaccine. This is because Ψ enhances RNA stability against nuclease activity and decreases the anti-RNA immune response. Ψ also provides structural flexibility to RNA by enhancing base stacking compared with canonical nucleobases.

Microprobes for Label-Free Detection of Short Tandem Repeats: An Insight into Alleviating Secondary Structure Effects.

Overgrowth of short tandem repeat sequences in our genes can cause various neurodegenerative disorders. Such repeat sequences are ideal targets for the label-free electrochemical detection of such potential expansions. However, their length- and sequence-dependent secondary structures may interfere with the interfacial charge transfer of a detection platform, making them complex targets.

Electrochemical Impedance Immunoassay for ALS-Associated Neurofilament Protein: Matrix Effect on the Immunoplatform.

Amyotrophic Lateral Sclerosis (ALS) is a neurodegenerative disorder, which has complex diagnostic steps. Electrochemical immunoassays may make the diagnosis simpler and faster. Here, we present the detection of ALS-associated neurofilament light chain (Nf-L) protein through an electrochemical impedance immunoassay on reduced graphene oxide (rGO) screen-printed electrodes.

DNA interfaces with dimensional materials for biomedical applications.

DNA interfaces with nano, micro, and macro materials have gained widespread attention for various applications. Such interfaces exhibit distinct functions and properties not only due to the unique properties of interfacing materials but also sequence- and conformation-dependent characteristics of the DNA. Therefore, DNA interfaces with diverse dimensional materials have advanced our understanding of the interaction mechanisms and the properties of such interfaces.

PNA microprobe for label-free detection of expanded trinucleotide repeats.

We present a PNA microprobe sensing platform to detect trinucleotide repeat mutation by electrochemical impedance spectroscopy. The microprobe platform discriminated Huntington's disease-associated CAG repeats in cell-derived total RNA with S/N 1 : 3. This sensitive, label-free, and PCR-free detection strategy may be employed in the future to develop biosensing platforms for the detection of a plethora of repeat expansion disorders.

Sequence-Independent DNA Adsorption on Few-Layered Oxygen-Functionalized Graphene Electrodes: An Electrochemical Study for Biosensing Application.

DNA is strongly adsorbed on oxidized graphene surfaces in the presence of divalent cations. Here, we studied the effect of DNA adsorption on electrochemical charge transfer at few-layered, oxygen-functionalized graphene (GO) electrodes. DNA adsorption on the inkjet-printed GO electrodes caused amplified current response from ferro/ferricyanide redox probe at concentration range 1 aM-10 nM in differential pulse voltammetry.

Label-free Electrochemical Detection of CGG Repeats on Inkjet Printable 2D Layers of MoS.

Flexible and ultrasensitive biosensing platforms capable of detecting a large number of trinucleotide repeats (TNRs) are crucial for future technology development needed to combat a variety of genetic disorders. For example, trinucleotide CGG repeat expansions in the gene can cause Fragile X syndrome (FXS) and Fragile X-associated tremor/ataxia syndrome (FXTAS). Current state-of-the-art technologies to detect repeat sequences are expensive, while relying on complicated procedures, and prone to false negatives.

Unique sequence-dependent properties of trinucleotide repeat monolayers: electrochemical, electrical, and topographic characterization.

Trinucleotide repeat (TNR) sequences widely exist in nature and their overgrowth is associated with two dozen neurodegenerative diseases in humans. These sequences have a unique helical flexibility, which affects their biophysical properties. A number of biophysical properties of these sequences have been studied in the past except their surface-tethered monolayers.

Desktop Fabrication of Lab-On-Chip Devices on Flexible Substrates: A Brief Review.

Flexible microfluidic devices are currently in demand because they can be mass-produced in resource-limited settings using simple and inexpensive fabrication tools. Finding new ways to fabricate microfluidic platforms on flexible substrates has been a hot area. Integration of customized detection tools for different lab-on-chip applications has made this area challenging.

Characterization and application of fluidic properties of trinucleotide repeat sequences by wax-on-plastic microfluidics.

Trinucleotide repeat (TNR) sequences introduce sequence-directed flexibility in the genomic makeup of all living species leading to unique non-canonical structure formation. In humans, the expansions of TNR sequences are responsible for almost 24 neurodegenerative and neuromuscular diseases because their unique structures disrupt cell functions. The biophysical studies of these sequences affect their electrophoretic mobility and spectroscopic signatures.

Novel probes for label-free detection of neurodegenerative GGGGCC repeats associated with amyotrophic lateral sclerosis.

DNA repeat expansion sequences cause a myriad of neurological diseases when they expand beyond a critical threshold. Previous electrochemical approaches focused on the detection of trinucleotide repeats (CAG, CGG, and GAA) and relied on labeling of the probe and/or target strands or enzyme-linked assays. However, detection of expanded GC-rich sequences is challenging because they are prone to forming secondary structures such as cruciforms and quadruplexes.

Hand-Fabricated CNT/AgNPs Electrodes using Wax-on-Plastic Platforms for Electro-Immunosensing Application.

Fabrication of inexpensive and flexible electronic and electrochemical sensors is in high demand for a wide range of biochemical and biomedical applications. We explore hand fabrication of CNT modified AgNPs electrodes using wax-on-plastic platforms and their application in electrochemical immunosensing. Wax patterns were printed on polyethylene terephthalate-based substrates to laydown templates for the electrodes.

DNA Films Containing the Artificial Nucleobase Imidazole Mediate Charge Transfer in a Silver(I)-Responsive Way.

The first sequence-dependent study of DNA films containing metal-mediated base pairs was performed to investigate the charge transfer resistance (R ) of metal-modified DNA. The imidazole (Im) deoxyribonucleoside was chosen as a highly Ag -specific ligandoside for the formation of Im-Ag -Im complexes within the duplexes. This new class of site-specifically metal-modified DNA films was characterized by UV, circular dichroism (CD), and X-ray photoelectron spectroscopy (XPS).

An unexpected use of ferrocene. A scanning electrochemical microscopy study of a toll-like receptor array and its interaction with E. coli.

Imaging of toll-like receptor microarrays was achieved using scanning electrochemical microscopy with the successful integration of two ferrocene derivatives in order to enhance the background contrast. This investigation has resulted in the novel fabrication of a tuneable, multiplex, broad-spectrum bacterial sensor for the interrogation of conserved microbial stimuli.

A microfluidic method for dopamine uptake measurements in dopaminergic neurons.

Dopamine (DA) is a classical neurotransmitter and dysfunction in its synaptic handling underlies many neurological disorders, including addiction, depression, and neurodegeneration. A key to understanding DA dysfunction is the accurate measurement of dopamine uptake by dopaminergic neurons. Current methods that allow for the analysis of dopamine uptake rely on standard multiwell-plate based ELISA, or on carbon-fibre microelectrodes used in in vivo recording techniques.

Electrochemiluminescence on digital microfluidics for microRNA analysis.

Electrochemiluminescence (ECL) is a sensitive analytical technique with great promise for biological applications, especially when combined with microfluidics. Here, we report the first integration of ECL with digital microfluidics (DMF). ECL detectors were fabricated into the ITO-coated top plates of DMF devices, allowing for the generation of light from electrically excited luminophores in sample droplets.

Electrochemistry, biosensors and microfluidics: a convergence of fields.

Electrochemistry, biosensors and microfluidics are popular research topics that have attracted widespread attention from chemists, biologists, physicists, and engineers. Here, we introduce the basic concepts and recent histories of electrochemistry, biosensors, and microfluidics, and describe how they are combining to form new application-areas, including so-called "point-of-care" systems in which measurements traditionally performed in a laboratory are moved into the field. We propose that this review can serve both as a useful starting-point for researchers who are new to these topics, as well as being a compendium of the current state-of-the art for experts in these evolving areas.

Investigation of the utility of complementary electrochemical detection techniques to examine the in vitro affinity of bacterial flagellins for a toll-like receptor 5 biosensor.

An initial investigation of the fabrication of a novel biosensor utilizing toll-like receptor 5 (TLR5) has been conducted. The detection assay using this sensor platform has been carried out using two complementary electrochemical techniques. The electrochemical properties of the modified bare gold surface following TLR5 immobilization were characterized.

A digital microfluidic electrochemical immunoassay.

Digital microfluidics (DMF) has emerged as a popular format for implementing quantitative immunoassays for diagnostic biomarkers. All previous reports of such assays have relied on optical detection; here, we introduce the first digital microfluidic immunoassay relying on electrochemical detection. In this system, an indium tin oxide (ITO) based DMF top plate was modified to include gold sensing electrodes and silver counter/pseudoreference electrodes suitable for in-line amperometric measurements.

Integrated digital microfluidic platform for voltammetric analysis.

Digital microfluidics (DMF) is an emerging technique for manipulating small volumes of liquids. DMF is particularly well suited for analytical applications as it allows automated handling of discrete samples, and it has been integrated with several inline analysis techniques. However, examples of the integration of DMF with electroanalytical methods are notably scarce, and those that have been reported rely on external electrodes that impose limitations on complexity.

Electrochemical signature of mismatch in overhang DNA films: a scanning electrochemical microscopic study.

High throughput DNA basepair mismatch detection is an ultimate goal for earlier and point-of-care diagnostics. However, the size of a target sequence on single nucleotide mismatch detection will critically impact the design of sensors in future. To study the potential impact of target size, the probe and target strands of unequal size were hybridized in the absence and presence of single nucleotide mismatches along the sequence.

Scanning positional variations in single-nucleotide polymorphism of DNA: an electrochemical study.

While there are a number of electrochemical methods reported that enable the detection of single nucleotide mismatches, the determination of mismatch position in a double stranded DNA remains an unsolved challenge. Using a model system, we systematically explored the electrochemical response of all possible positions of single nucleotide mismatches in a set of 25-mer DNA films. These ds-DNA sequences each with a single mismatch at one of the twenty-five positions were bound to gold surfaces through a Au-S linkage and analyzed by electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) in the absence and presence of Zn(2+).

Electrochemical identification of artificial oligonucleotides related to bovine species. Potential for identification of species based on mismatches in the mitochondrial cytochrome C1 oxidase gene.

Our studies show that electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) of films of ds-DNA on gold allow us to distinguish between mitochondrial DNA fragments of the cytochrome c(1) oxidase (mt-Cox1) of three related species of the subfamily 'Bovinae' (Bos taurus, Bison bison, and Bison bonasus). In EIS, a perfectly matched DNA gives rise to a considerably larger charge transfer resistance R(ct) compared to mismatched pairings. Differences in charge transfer resistance, ΔR(ct), before and after the addition of Zn(2+) ions provide an additional tool for identification.

The effects of oligonucleotide overhangs on the surface hybridization in DNA films: an impedance study.

While oligonucleotide hybridization and effects of nucleobase mismatches have been the intense focus of a number of electrochemical studies, the effects of the target strand length on the electrochemical response of oligonucleotide films have not been addressed yet. In this report, we have studied the electrochemical impedance of the oligonucleotide films having overhangs on either the target or the surface bound capture strand. Each system gives different impedance responses, which were interpreted with the help of modified Randles' equivalent.