Surface-Engineered 2D Bimetallic FeNi-MOFs Derived from Layered Double Hydroxides for Photocatalytic Membranes with Enhanced Dye Fixation in Wastewater Treatment.

FeNi-based layered double hydroxides (LDHs) are used as precursors to derive bimetallic FeNi-metal organic frameworks (D-FeNi MOFs) with terephthalic acid ligands, offering enhanced properties compared to conventionally prepared FeNi-MOFs (C-FeNi MOFs). D-FeNi MOFs exhibited superior structural, surface, and electrochemical features, confirmed by density functional theory (DFT) studies, which also predicted their catalytic mechanism. Band edge potential calculations through Mott-Schottky analysis revealed their favorable redox potential, enhanced charge transfer, and reduced recombination resistance, explaining their superior photocatalytic efficiency.

Insights into the Morphological Effects of 1D, 2D, and 3D CoV-Layered Double Hydroxides on Their Electrochemical Performance in Supercapacitors.

In this study, bimetallic cobalt-vanadium-based layered double hydroxide (CoV-LDH) systems were developed by varying the Co/V molar ratios (1:1 and 2:1) and hydrothermal temperatures (120 and 180 °C). Structural analysis by X-ray diffraction (XRD), Raman, and Fourier-transform infrared (FTIR) spectroscopy indicated the successful formation of CoV-LDH with a unique structure and lattice distortions, reflecting the influence of both the metal concentrations and temperature on the crystal and chemical structures of the developed bimetallic systems. Similarly, the field-emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM) images revealed a flaky 2D nanosheet-like structure for the bimetallic CoV-LDH with a 1:1 ratio prepared at 120 °C (CVL1-120), whereas one-dimensional (1D) and three-dimensional (3D) morphologies were observed for other bimetallic CoV-LDH systems prepared with a different molar ratio (2:1) and/or temperature (180 °C).

Ligand modulated charge transfers in Z-scheme configured Ni-MOF/g-CN nanocomposites for photocatalytic remediation of dye-polluted water.

The development of photocatalysts must be meticulous, especially when they are designed to degrade hazardous dyes that cause mutagenesis and carcinogenesis. In this meticulous approach, Ni-based metal-organic frameworks with different ligands, including terephthalic acid (NTP), 2-aminoterephthalic acid (NATP), and their composite with g-CN (NTP/GCN, and NATP/GCN) have been synthesized using hydrothermal method. Structural analysis by XRD and ATR-IR revealed synergistic properties due to robust chemical interactions between the NATP-MOFs and GCN systems.

Unveiling the potential of emergent nanoscale composite polymer electrolytes for safe and efficient all solid-state lithium-ion batteries.

Solid-state polymer electrolytes (SSPEs) are promising materials for Li-ion batteries due to their enhanced safety features, which are crucial for preventing short circuits and explosions, replacing traditional liquid electrolytes with solid electrolytes are increasingly important to improve battery reliability and lifespan. There are essentially three-types of solid-state electrolytes such as solid polymer electrolyte, composite based polymer electrolyte and gel-based polymer electrolyte are largely used in battery applications. Additionally, battery separators must have high ionic conductivity and porosity to boost safety and performance.

Ligand-Engineered Structural and Physiochemical Properties of 1D Molybdenum-MOFs: A Seldom Explored System for Photocatalytic Applications.

As one of the seldom explored systems, molybdenum-based metal-organic frameworks (Mo-MOFs) with different ligands such as terephthalic acid (Mo-TA), 2-aminoterephthalic acid (Mo-ATA), benzenetricarboxylic acid (Mo-BTC), 2-methylimidazole (Mo-2MI), 2-bipyridine (Mo-2bpy), and 4-bipyridine (Mo-4bpy) were developed in this study. X-ray diffraction (XRD), Raman, and attenuated total reflectance-infrared (ATR-IR) analyses confirmed the ligand-dependent crystal structure of the Mo-MOFs along with the characteristic functional groups present in the respective systems. Interestingly, the morphology of all of these the developed Mo-MOFs was found to be a one-dimensional rod-like structure, which was attributed to the binding nature of the ligands onto the growing Mo-frameworks.

Transesterification of oil to biodiesel using highly porous sulfonated biochar catalyst: Optimization and characterization dataset.

The study involves a collection of data from the published article titled "Active sites engineered biomass-carbon as a catalyst for biodiesel production: Process optimization using RSM and life cycle assessment "" journal. Here, the activated biochar was functionalized using 4-diazoniobenzenesulfonate to obtain sulfonic acid functionalized activated biochar. The catalyst was comprehensively characterized using XRD, FTIR, TGA, NH-TPD, SEM-EDS, TEM, BET, and XPS analysis.

anti-prostate adenocarcinoma and lung cancer studies of phenoxyaniline--poly(methyl methacrylate) based nanocomposites controlled radical polymerization.

A phenoxyaniline-based macroinitiator is utilized for the first time in order to produce phenoxyaniline--poly(methyl methacrylate) composites through single electron transfer-living radical polymerization (SET-LRP) under mild conditions. A different weight percentage of Cloisite 93A is added into the polymer mixtures in order to increase their biochemical properties. The prepared block copolymer nanocomposites are characterized using ATR-IR, UV-vis-spectroscopy, XRD, Raman, TGA, DSC, a particle size analyzer, contact angle measurements and SEM in order to characterize their structural, thermal, surface and morphological properties.

Developments in Titanium-Based Alkali and Alkaline Earth Metal Oxide Catalysts for Sustainable Biodiesel Production: A Review.

Biodiesel represents a biodegradable, environmentally friendly, and renewable alternative to fossil fuels. Despite more than three decades of research, significant obstacles still hinder the widespread production of biodiesel. This current review elucidates both the potential and the existing challenges associated with homogeneous and heterogeneous catalysts in catalyzing biodiesel production, with a particular focus on alkali analogues, alkaline earth metal oxides, and titania-based catalysts.

Comprehensive Insights into the Family of Atomically Thin 2D-Materials for Diverse Photocatalytic Applications.

2D materials with their fascinating physiochemical, structural, and electronic properties have attracted researchers and have been used for a variety of applications such as electrocatalysis, photocatalysis, energy storage, magnetoresistance, and sensing. In recent times, 2D materials have gained great momentum in the spectrum of photocatalytic applications such as pollutant degradation, water splitting, CO reduction, NH production, microbial disinfection, and heavy metal reduction, thanks to their superior properties including visible light responsive band gap, improved charge separation and electron mobility, suppressed charge recombination and high surface reactive sites, and thus enhance the photocatalytic properties rationally as compared to 3D and other low-dimensional materials. In this context, this review spot-lights the family of various 2D materials, their properties and their 2D structure-induced photocatalytic mechanisms while giving an overview on their synthesis methods along with a detailed discussion on their diverse photocatalytic applications.

Observation of inherited plasmonic properties of TiN in titanium oxynitride (TiON) for solar-drive photocatalytic applications.

This study demonstrates the synthesis of titanium oxynitride (TiON) via a controlled step-annealing of commercial titanium nitride (TiN) powders under normal ambience. The structure of the formed TiON system is confirmed via XRD, Rietveld refinements, XPS, Raman, and HRTEM analysis. A distinct plasmonic band corresponding to TiN is observed in the absorption spectrum of TiON, indicating that the surface plasmonic resonance (SPR) property of TiN is being inherited in the resulting TiON system.

Aqueous, Non-Polymer-Based Perovskite Quantum Dots for Bioimaging: Conserving Fluorescence and Long-Term Stability Simple and Robust Synthesis.

Perovskite quantum dots (PQDs) offer high photoluminescence quantum yields; however, due to their limited stability in aqueous media, to date their utilization in biomedical applications has been limited. The present work demonstrates highly fluorescent and stable aqueous PQDs that were synthesized using a facile engineered phase transfer method. Ligands were engineered to have a dual functionality, i.

Direct Z-scheme mediated SmVO/UiO-66-NH heterojunction nanocomposite for the degradation of antibiotic tetracycline hydrochloride molecules under sunlight.

The use of tetracycline hydrochloride (TCH) for veterinary, human therapy, and agriculture has risen in the past few decades, making it to become one of the most exploited antibiotics. However, TCH residue in the environment is causing issues related to the evolution of antibiotic-resistant bacteria. To address such a problem, photodegradation offers a potential solution to decompose these pollutants in wastewater and thereby mitigates negative environmental impacts.

Metal chalcogenide-based core/shell photocatalysts for solar hydrogen production: Recent advances, properties and technology challenges.

Metal chalcogenides play a vital role in the conversion of solar energy into hydrogen fuel. Hydrogen fuel technology can possibly tackle the future energy crises by replacing carbon fuels such as petroleum, diesel and kerosene, owning to zero emission carbon-free gas and eco-friendliness. Metal chalcogenides are classified into narrow band gap (CdS, CuS, BiS MoS CdSe and MoSe) materials and wide band gap materials (ZnS, ZnSe and ZnTe).

Emerging Hybrid Nanocomposite Photocatalysts for the Degradation of Antibiotics: Insights into Their Designs and Mechanisms.

The raising occurrence of antibiotics in the global water bodies has received the emerging concern due to their potential threats of generating the antibiotic-resistive and genotoxic effects into humans and aquatic species. In this direction, the solar energy assisted photocatalytic technique offers a promising solution to address such emerging concern and paves ways for the complete degradation of antibiotics with the generation of less or non-toxic by-products. Particularly, the designing of hybrid photocatalyticcomposite materials has been found to show higher antibiotics degradation efficiencies.

Monodispersed core/shell nanospheres of ZnS/NiO with enhanced H generation and quantum efficiency at versatile photocatalytic conditions.

This investigation is first to elucidate the synthesis of mono-dispersed ZnS/NiO-core/shell nanostructures with a uniform thin layer of NiO-shell on the ZnS-nanospheres as a core under controlled thermal treatments. NiO-shell thickness varied to 8.2, 12.

Light-driven transformation of biomass into chemicals using photocatalysts - Vistas and challenges.

Lignocellulosic biomass has become an important sustainable resource for fuels, chemicals and energy. It is an attractive source for alternative fuels and green chemicals because it is non-edible and widely available in the planet in huge volumes. The use of biomass as starting material to produce fuels and chemicals leads to closed carbon cycle and promotes circular economy.

Copper (0) Mediated Single Electron Transfer-Living Radical Polymerization of Methyl Methacrylate: Functionalized Graphene as a Convenient Tool for Radical Initiator.

Polymer nanocomposites have been synthesized by the covalent addition of bromide-functionalized graphene (Graphene-Br) through the single electron transfer-living radical polymerization technique (SET-LRP). Graphite functionalized with bromide for the first time via an efficient route using mild reagents has been designed to develop a graphene based radical initiator. The efficiency of sacrificial initiator (ethyl α-bromoisobutyrate) has also been compared with a graphene based initiator towards monitoring their Cu(0) mediated controlled molecular weight and morphological structures through mass spectroscopy (MOLDI-TOF) and field emission scanning electron microscopy (FE-SEM) analysis, respectively.