Modeling approach for TiC MXene-based fluorescent aptasensor for amoxicillin biosensing in water matrices.

Amoxicillin, a member of the penicillin family, is primarily utilized for the treatment of various bacterial infections affecting ears, nose, throat, urinary tract, and skin. Given its widespread application in medicine, agriculture, environment, and food industry, the precise and sensitive detection of amoxicillin is important. This study introduces a novel approach to developing a sensitive and selective fluorescent aptasensor relying on fluorescence resonance energy transfer (FRET) for the specific detection of amoxicillin.

Harnessing artificial intelligence-driven approach for enhanced indole-3-acetic acid from the newly isolated Streptomyces rutgersensis AW08.

Indole-3-acetic acid (IAA) derived from Actinobacteria fermentations on agro-wastes constitutes a safer and low-cost alternative to synthetic IAA. This study aims to select a high IAA-producing Streptomyces-like strain isolated from Lake Oubeira sediments (El Kala, Algeria) for further investigations (i.e.

NiFe-PANI composites synthesized by electrodeposition for enhanced photocatalytic degradation of diclofenac sodium from wastewater.

A simple inexpensive approach was used to synthesize NiFe-PANI nanocomposites and used for photodegradation of diclofenac sodium (DCF) in water sources. Morphological, optical, structural, and catalytic properties of the nanocomposites were investigated using X-ray diffraction (XRD) to confirm the cubic structure of NiFe nanoparticles and Fourier-transform infrared spectroscopy (FTIR) that revealed the presence of NiFe and PANI, scanning electron microscopy (SEM) showed the uniform distribution of NiFe nanoparticles onto the surface of PANI, Energy-Dispersive X-ray spectroscopy (EDX) was utilized to validate the composition of the obtained Permalloy NiFe-PANI nanocomposites, optical properties confirmed the decrease of E band gap from 2.62 to 2.

Waste valorization as low-cost media engineering for auxin production from the newly isolated Streptomyces rubrogriseus AW22: Model development.

Indole-3-acetic acid (IAA) represents a crucial phytohormone regulating specific tropic responses in plants and functions as a chemical signal between plant hosts and their symbionts. The Actinobacteria strain of AW22 with high IAA production ability was isolated in Algeria for the first time and was characterized as Streptomyces rubrogriseus through chemotaxonomic analysis and 16 S rDNA sequence alignment. The suitable medium for a maximum IAA yield was engineered in vitro and in silico using machine learning-assisted modeling.

Synthesis of novel PANI/PVA-NiCu composite material for efficient removal of organic dyes.

The present work aims the synthesis of a novel, low cost, and environmentally friendly PANI/PVA-CuNi composite by chemical oxidative polymerization of aniline monomer and polyvinyl alcohol (PVA) as film matrix; several percentages of copper (Cu) and Nickel (Ni) were used. UV-Visible spectroscopy, FTIR, SEM-EDX, and TGA were used to characterize the nanocomposites. While PANI/PVA-CuNi nanocomposites were investigated in adsorption experiments of methylene blue (MB) under different controlled conditions (time reaction, adsorbent dosage, initial dye concentration, stirring speed, temperature, and pH of the medium) also various kinetic models were employed to evaluate the efficiency of the adsorption.

Latest eco-friendly approaches for pesticides decontamination using microorganisms and consortia microalgae: A comprehensive insights, challenges, and perspectives.

Pesticides are chemical compounds that are considered toxic to many organisms, including humans. Their elimination from polluted sites attracted the attention of Scientifics in the last decade; Among the various methods used to decontaminate pesticides from the environment, the microbial-algae consortium is a promising bioremediation technology, which implies several advantages as an eco-friendly process that generate biomass produced that could be valorized in the form of bioenergy, In this review, we will discuss the latest eco-friendly approaches using microorganisms to remediate sites contaminated by pesticides, and shows the ability of microbial, algae and their consortium to remove pesticides and the role of different enzymes in degradation processes.

Degradation of Azithromycin from aqueous solution using Chlorine-ferrous- oxidation: ANN-GA modeling and Daphnia magna biotoxicity test assessment.

Azithromycin (AZM), an antibacterial considered one of the most consumed drugs, especially during the period against the Covid 19 pandemic, and it is one of the persistent contaminants that can be released into aquatic ecosystems. The purpose of this study is to determine the efficacy of a Fenton-like process (chlorine/iron) for the degradation of AZM in an aqueous medium by determining the impact of several factors (the initial concentration of (FeSO, NaClO, pollutant), and the initial pH) on the degradation rate. The Response Surface Methodology (RSM) based on the Box-Wilson design as well as the Artificial Neural Network (ANN) modeling combined with a genetic algorithm (GA) approaches were used to determine the optimal levels of the selected variables and the optimal rate of degradation.

Removal of the industrial azo dye crystal violet using a natural clay: Characterization, kinetic modeling, and RSM optimization.

Natural clay (NC) was employed as a natural adsorbent for the elimination of an azo dye Crystal Violet (CV) from aqueous media. The characterization of the clay was performed by X-ray diffractometry (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) equipped with an X-ray energy dispersion spectrometer (EDS) and Brunauer-Emmett-Teller (BET) specific surface area analysis. The Box-Behnken design (BBD) was used as a powerful tool to determine the stationary points of the main independent factors: initial CV concentration, initial pH, temperature, and adsorbent dose on the adsorption efficiency.

MXene-based electrochemical sensors for detection of environmental pollutants: A comprehensive review.

Since the discovery of MXenes at Drexel University in the United States in 2011, there has been extensive research regarding various applications of MXenes including environmental remediation. MXenes with a general formula of MXT are a class of two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides with unique chemical and physical characteristics as nanomaterials. MXenes feature characteristics such as high conductivity, hydrophobicity, and large specific surface areas that are attracting attention from researchers in many fields including environmental water engineering such as desalination and wastewater treatment as well as designing and building efficient sensors to detect hazardous pollutants in water.

Biosynthesis, characterization, and evaluation of antibacterial and photocatalytic methylene blue dye degradation activities of silver nanoparticles from Streptomyces tuirus strain.

Silver nanoparticles (AgNPs) are a promising technology for the design of antimicrobial agents against drug-resistant pathogens. It could also be used for the photocatalytic degradation of dyes used in industries such as methylene blue (MB). In this study, 17 different actinomycetal strains isolated from hydrocarbon-contaminated soils collected from an oil distribution company in Algeria were evaluated for their ability to produce NPs.

Antimicrobial and antifungal properties of NiCu-PANI/PVA quaternary nanocomposite synthesized by chemical oxidative polymerization of polyaniline.

Increasing antimicrobial resistance has led to use of novel technologies such as nanomaterials and nanocomposites that have shown effective antimicrobial and/or antifungal activities against several gram-positive and gram-negative bacteria. There have been limited studies on antimicrobial properties of the combined polymer nanocomposites with transitional bimetallic nanoparticles such as nickel (Ni) and copper (Cu). Thus, the main objective of this study was to synthesis, characterize and investigate the antibacterial and antifungal properties of NiCu-PANI/PVA nanocomposite.

High-efficiency electrochemical degradation of phenol in aqueous solutions using Ni-PPy and Cu-PPy composite materials.

Conductive crystalline polypyrrole (Cryst-PPy), Nickel-polypyrrole (Ni-PPy), and copper- polypyrole (Cu-PPy) hybrid materials were prepared using a chemical polymerization method in an aqueous solution. Part I was focused on the Chemical synthesis of Cryst-PPy powder from an organic medium. Cryst-PPy powder was successfully synthesized by chemical route from an organic medium of acetonitrile with polyethylene oxide as a stabilizing agent and oxidizing agent like potassium peroxydisulfate.

Recent advances in MXene-based nanomaterials for desalination at water interfaces.

The best exceptional Physico-chemical attributes of MXenes including high conductivity, high surface area, high functionalization, hydroxide site, and other interesting properties have attracted recently the attention of scientists in the applications of MXene (MXT)-based nanomaterials for water treatment. To provide a full and comprehensive vision of the current state of the art, and improve the treatment performance, and motivate new researches in this area, this review focused on the uses of these novel 2D transition metal carbides for desalination of water and the general methods of fabrication of MXenes; thus, MXene-based nanomaterials are very efficient candidates in water desalination processes, in this review, the main properties of previous and current works about MXenes applications in this area were properly investigated. Moreover, a particular overview about the different properties of MXenes in desalination such as etching method, hydrophobicity, structural modification, and chemical modification has been performed; meanwhile, the investigation of MXenes and MXenes-based composites would be an excellent candidate in the future of water purification and environmental remediation fields, since they have several good properties compared to the other 2D materials.

Photocatalytic degradation of Penicillin G in aqueous solutions: Kinetic, degradation pathway, and microbioassays assessment.

The photocatalytic degradation of pharmaceutical micropollutants of Penicillin G (PG) was investigated in a photoreactor at a laboratory scale. The impact of type of catalyst, pH, and initial concentration of PG were studied. Maximum removal efficiency was obtained at pH = 6.

Optimization of thermostable proteases production under agro-wastes solid-state fermentation by a new thermophilic Mycothermus thermophilus isolated from a hydrothermal spring Hammam Debagh, Algeria.

The present work investigates for the first time the presence and isolation of the thermophilic fungi from hydrothermal spring situated at the locality of Guelma, in the Northeast of Algeria. The production of the thermostable proteases and the optimization of culture conditions under agro-wastes solid-state fermentation to achieve optimal production capacity were explored. A statistical experimental approach consisting of two designs was used to determine the optimum culture conditions and to attain the greatest enzyme production.

The Fenton-like reaction for Arsenic removal from groundwater: Health risk assessment.

In this paper, the heterogeneous Fenton like-reaction for Arsenic-contaminated groundwater remediation based on the performance of FeSO as an efficient and green catalyst and CaO as a source of HO was investigated. To intensify the heterogeneous Fenton process, three oxidants were tested: sodium percarbonate (SPC), sodium persulfate (SPS), and calcium peroxide (CP). The results showed that CP and SPC had a synergetic effect on the rate of Arsenic degradation, while SPS had an antagonistic effect.

Valorization and optimization of agro-industrial orange waste for the production of enzyme by halophilic Streptomyces sp.

This study underlines the biotechnical valorization of the accumulated and unusable remains of agro-industrial orange fruit peel waste to produce α-amylase under submerged conditions by Streptomyces sp. KP314280 (20r). The response surface methodology based on central composite design (RSM-CCD) and artificial neural network coupled with a genetic algorithm (ANN-GA) were used to model and optimize the conditions for the α-amylase production.

A novel non-enzymatic glucose sensor based on NiFe(NPs)-polyaniline hybrid materials.

This article was focused on the elaboration of NiFe-Polyaniline glucose sensors via electrochemical technique. Firstly, the PANi (polyaniline) fibers were synthesized by oxidation of the monomer aniline on FTO (fluorine tin oxide) substrate. Secondly, the Nickel-Iron nanoparticles (NiFe (NPs)) were obtained by the Chronoamperometry method on the Polyaniline surface.

Data mining for pesticide decontamination using heterogeneous photocatalytic processes.

Pesticides are chemical compounds used to kill pests and weeds. Due to their nature, pesticides are potentially toxic to many organisms, including humans. Among the various methods used to decontaminate pesticides from the environment, the heterogeneous photocatalytic process is one of the most effective approaches.

Photocatalytic-persulfate- oxidation for diclofenac removal from aqueous solutions: Modeling, optimization and biotoxicity test assessment.

In this paper, the influence of several aquatic factors (the nature of catalyst, the initial pH and the initial concentration of the pollutant) on the photocatalytic degradation of diclofenac (DFC), one of the most widely prescribed anti-inflammatory non-steroidal drug, was studied. Also, in order to examine the intensification process, the variation of the photocatalytic DFC degradation in the presence of sodium persulfate (PPS) was analyzed. It was found that, compared to titanium dioxide (TiO), the zinc oxide (ZnO) photocatalyst performed exceptionally well, with a 96.

Box-Wilson design modeling of photocatalytic degradation of industrial dye and wastewater in semi-pilot solar photoreactor.

This work focuses on the treatment of a dye solution, C.I. Basic Blue 41 (BB41), and industrial wastewater by UV/TiO photocatalytic process using aqueous catalyst suspensions of titanium dioxide (TiO), Degussa P25.