Cellulose nanocrystal dispersion-ability in polylactides with various molecular weights prepared in dichloromethane/dimethyl sulfoxide solvents for electrospinning applications.

In this study, effects of polylactide molecular weight, i.e., high (HPLA), medium (MPLA), low (LPLA), and dichloromethane (DCM)/dimethyl sulfoxide (DMSO) blend ratio on cellulose nanocrystal (CNC) dispersion quality in solution casted PLA/CNC nanocomposites were investigated via small amplitude oscillatory shear rheological analysis, while crystallization behavior, thermal degradation, morphological structure of the nanocomposites were also reported.

Nanoporous air filtering systems made from renewable sources: benefits and challenges.

There is a crucial need for air purification systems due to increasing air contamination, while conventional air-filtering materials face challenges in eliminating gaseous and particulate pollutants. This review examines the development and characteristics of nanoporous polymeric materials developed from renewable resources, which have rapidly advanced in recent years. These materials offer more sustainable alternatives for nanoporous structures made out of conventional polymers and significantly impact the properties of porous polymers.

In-situ self-reinforcement of amorphous polylactide (PLA) through induced crystallites network and its highly ductile and toughened PLA/poly(butylene adipate-co-terephthalate) (PBAT) blends.

Crystallites of a semicrystalline polylactide (cPLA) were induced in an amorphous PLA (aPLA) and its blends with poly(butylene adipate-co-terephthalate) (PBAT) to achieve in-situ self-reinforced PLA based structures. The approach involved the melt blending of cPLA as a minor phase with aPLA and its blends with PBAT at processing temperatures below the crystal melting peak of cPLA. An injection molding (IM) process was first adopted to obtain self-reinforced PLA (SR-PLA) structures at aPLA/cPLA weight ratios of 100/0, 95/5, 90/10, 85/15, and 80/20.

Poly(glycidyl methacrylate) modified cellulose nanocrystals and their PBAT-based nanocomposites.

Melt processing of cellulose nanocrystals (CNCs) reinforced nanocomposites is still a serious challenge due to the hydrophilic nature of CNCs and their severe agglomeration tendency within the polymer melt. In this study, chemical modification of CNC through grafting poly(glycidyl methacrylate) (PGMA) with various degrees was implemented. Wettability of the modified CNCs (mCNCs) were controlled and their structure was characterized through Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), optical microscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC).

Foam 3D Printing of Thermoplastics: A Symbiosis of Additive Manufacturing and Foaming Technology.

Due to their light-weight and cost-effectiveness, cellular thermoplastic foams are considered as important engineering materials. On the other hand, additive manufacturing or 3D printing is one of the emerging and fastest growing manufacturing technologies due to its advantages such as design freedom and tool-less production. Nowadays, 3D printing of polymer compounds is mostly limited to manufacturing of solid parts.

Entirely environment-friendly polylactide composites with outstanding heat resistance and superior mechanical performance fabricated by spunbond technology: Exploring the role of nanofibrillated stereocomplex polylactide crystals.

This study aims at investigating the manufacturing and characterization of all-polylactide composites prepared by melt spunbond spinning technology. To do so, a series of asymmetric stereocomplex polylactide (SC-PLA) blends (PLLA 95 wt%/PDLA 5 wt%) was melt spun. To examine the impact of molecular structure of PDLA, the blends of linear PLLA, and low and high molecular weight as well as branched PDLAs, were subjected to a single step spunbond process.

Effect of solvent type on the dispersion quality of spray-and freeze-dried CNCs in PLA through rheological analysis.

Polylactide (PLA) nanocomposites with spray-and freeze-dried cellulose nanocrystals (i.e., SCNC and FCNC) were prepared through solution casting using four different solvents: tetrahydrofuran (THF), chloroform (CHL), dimethylformamide (DMF), and dimethyl sulfoxide (DMSO).

Effects of molecular weight and crystallizability of polylactide on the cellulose nanocrystal dispersion quality in their nanocomposites.

This study investigated how cellulose nanocrystals (CNC) dispersion quality and its percolation network formation could be influenced when using polylactide (PLA) with various molecular weights and crystallizability. In this context, systematic rheological experiments were conducted on PLA/CNC nanocomposites prepared through solution casting method using dimethylformamide (DMF) as the solvent. It was found that lower CNC percolation concentrations could be obtained when a PLA matrix possesses lower molecular weight as the shorter chains and CNCs interpenetration could be facilitated during their dissolution in the solvent.

Polylactide cellulose-based nanocomposites.

Among biopolymers, polylactide (PLA) is considered as the most appropriate substitute for the petroleum-based polymers which are widely used in various commodity and engineering applications. PLA, however, also suffers from series of shortcomings such as slow crystallization rate and low melt strength which result in poor processability, formability and foamability which substantially limit its production and usage. Recently, the use of biobased/biodegradable cellulose nanoparticles such as cellulose nanocrystals (CNC), cellulose nanofibers (CNF), and bacterial nanocellulose (BC) have been proposed to manufacture fully green PLA-based biocomposites while they could resolve some of the noted drawbacks of PLA.

Poly (lactic acid) blends: Processing, properties and applications.

Poly (lactic acid) or polylactide (PLA) is a commercial biobased, biodegradable, biocompatible, compostable and non-toxic polymer that has competitive material and processing costs and desirable mechanical properties. Thereby, it can be considered favorably for biomedical applications and as the most promising substitute for petroleum-based polymers in a wide range of commodity and engineering applications. However, PLA has some significant shortcomings such as low melt strength, slow crystallization rate, poor processability, high brittleness, low toughness, and low service temperature, which limit its applications.

Lightweight polypropylene/stainless-steel fiber composite foams with low percolation for efficient electromagnetic interference shielding.

Lightweight polypropylene/stainless-steel fiber (PP-SSF) composites with 15-35% density reduction were fabricated using foam injection molding. The electrical percolation threshold, through-plane electrical conductivity, and electromagnetic interference (EMI) shielding effectiveness (SE) of the PP-SSF composite foams were characterized and compared against the solid counterparts. With 3 wt % CO2 dissolved in PP as a temporary plasticizer and lubricant, the fiber breakage was significantly decreased during injection molding, and well-dispersed fibers with unprecedentedly large aspect ratios of over 100 were achieved.